Hello,

The Intel i211 LOM pcie ethernet controllers' iNVM operates as an OTP and has no externel EEPROM interface [1]. The following allows the driver to pickup the MAC address from a device tree blob when CONFIG_OF has been enabled.

[1] http://www.intel.com/content/www/us/en/embedded/products/networking/i211-ethernet-controller-datasheet.html

Changes V2
- Restrict searching for compatible devices to current pci device.

Signed-off-by: John Holland <jotih...@gmail.com>
---

drivers/net/ethernet/intel/igb/igb_main.c | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 31e5f39..f7788fa 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -56,6 +56,11 @@
 #include <linux/i2c.h>
 #include "igb.h"

+#ifdef CONFIG_OF
+#include <linux/of_net.h>
+#include <linux/etherdevice.h>
+#endif
+
 #define MAJ 5
 #define MIN 3
 #define BUILD 0
@@ -2216,6 +2221,26 @@ static s32 igb_init_i2c(struct igb_adapter *adapter)
        return status;
 }

+#ifdef CONFIG_OF
+/**
+ *  igb_read_mac_addr_dts - Read mac address from the device tree blob
+ *  @dev: pointer to device structure
+ *  @mac_addr: pointer to found mac address
+ **/
+static void igb_read_mac_addr_dts(const struct device *dev, u8 *mac_addr)
+{
+       const u8 *mac;
+       struct device_node *dn;
+
+       dn = of_find_compatible_node(dev->of_node, NULL, "intel,i210");
+       if (dn) {
+               mac = of_get_mac_address(dn);
+               if (mac)
+                       ether_addr_copy(mac_addr, mac);
+       }
+}
+#endif
+
 /**
  *  igb_probe - Device Initialization Routine
  *  @pdev: PCI device information struct
@@ -2420,6 +2445,11 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
        if (hw->mac.ops.read_mac_addr(hw))
                dev_err(&pdev->dev, "NVM Read Error\n");

+#ifdef CONFIG_OF
+       if (!is_valid_ether_addr(hw->mac.addr))
+               igb_read_mac_addr_dts(&pdev->dev, hw->mac.addr);
+#endif
+
        memcpy(netdev->dev_addr, hw->mac.addr, netdev->addr_len);

        if (!is_valid_ether_addr(netdev->dev_addr)) {

Reply via email to