This patch series refactors the spi-ks8995 driver to finally add support
for the MICREL KSZ8795CLX. Additionally support for setting initial
register values as well as controlling a GPIO line for resetting the
switch is added.
Helmut Buchsbaum (7):
net: phy: spi_ks8995: introduce spi_device_id table
net: phy: spi_ks8995: add chip verification and determine chip
revision
net: phy: spi_ks8995: add ability to configure register initialization
net: phy: spi_ks8995: add support for resetting switch using GPIO
net: phy: spi_ks8995: generalize creation of SPI commands
net: phy: spi_ks8995: add support for MICREL KSZ8795CLX 5-Port managed
switch
dt-bindings: net: ks8995: add documentation for MICREL ks8995 driver
.../devicetree/bindings/net/micrel-ks8995.txt | 27 ++
drivers/net/phy/spi_ks8995.c | 407 +++++++++++++++++----
2 files changed, 371 insertions(+), 63 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/micrel-ks8995.txt
--
2.1.4
