V2 is a rebase on top of johannes endian-safe patch and
is only the 1st eight patches.
The testing for this series was done on a nitrogen6x.
The base commit was
commit b45efa30a626e915192a6c548cd8642379cd47cc
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Testing showed no change in performance.
Testing used imx_v6_v7_defconfig + CONFIG_MICREL_PHY.
The processor was running at 996Mhz.
The following commands were used to get the transfer rates.
On an x86 ubunto system,
iperf -s -i.5 -u
On a nitrogen6x board, running via SD Card.
I first stopped some background processes
stop cron
stop upstart-file-bridge
stop upstart-socket-bridge
stop upstart-udev-bridge
stop rsyslog
stop dbus
killall dhclient
echo performance >/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
taskset 0x2 iperf -c 192.168.0.201 -u -t60 -b500M -r
There is a branch available on github with this series, and the rest of
my fec patches, for those who would like to test it.
https://github.com:boundarydevices/linux-imx6.git branch net-next_master
Troy Kisky (8):
SDCard
TX/RX
378/405 before any patches
379/407 net: fec: stop the "rcv is not +last, " error messages
378/405 net: fec: fix rx error counts
379/396 net: fec: fix fec_enet_get_free_txdesc_num
379/403 net: fec: add struct bufdesc_prop
390/396 net: fec: add variable reg_desc_active to speed things up
388/396 net: fec: don't disable FEC_ENET_TS_TIMER interrupt
382/403 net: fec: don't transfer ownership until descriptor write is complete
378/403 net: fec: improve error handling
drivers/net/ethernet/freescale/fec.h | 38 ++-
drivers/net/ethernet/freescale/fec_main.c | 396 ++++++++++++++----------------
2 files changed, 196 insertions(+), 238 deletions(-)
--
2.5.0
