On Thu, Feb 04, 2016 at 12:23:02AM -0800, Fastabend, John R wrote:
> On 2/3/2016 11:30 PM, Amir Vadai" wrote:
> > On Wed, Feb 03, 2016 at 01:29:59AM -0800, John Fastabend wrote:
> >> This adds initial support for offloading the u32 tc classifier. This
> >> initial implementation only implements a few base matches and actions
> >> to illustrate the use of the infrastructure patches.
> >>
> >> However it is an interesting subset because it handles the u32 next
> >> hdr logic to correctly map tcp packets from ip headers using the ihl
> >> and protocol fields. After this is accepted we can extend the match
> >> and action fields easily by updating the model header file.
> >>
> >> Also only the drop action is supported initially.
> >>
> >> Here is a short test script,
> >>
> >> #tc qdisc add dev eth4 ingress
> >> #tc filter add dev eth4 parent ffff: protocol ip \
> >> u32 ht 800: order 1 \
> >> match ip dst 15.0.0.1/32 match ip src 15.0.0.2/32 action drop
> >>
> >> <-- hardware has dst/src ip match rule installed -->
> >>
> >> #tc filter del dev eth4 parent ffff: prio 49152
> >> #tc filter add dev eth4 parent ffff: protocol ip prio 99 \
> >> handle 1: u32 divisor 1
> >> #tc filter add dev eth4 protocol ip parent ffff: prio 99 \
> >> u32 ht 800: order 1 link 1: \
> >> offset at 0 mask 0f00 shift 6 plus 0 eat match ip protocol 6 ff
> >> #tc filter add dev eth4 parent ffff: protocol ip \
> >> u32 ht 1: order 3 match tcp src 23 ffff action drop
> >>
> >> <-- hardware has tcp src port rule installed -->
> >>
> >> #tc qdisc del dev eth4 parent ffff:
> >>
> >> <-- hardware cleaned up -->
> >>
> >> Signed-off-by: John Fastabend <john.r.fastab...@intel.com>
> >> ---
> >> drivers/net/ethernet/intel/ixgbe/ixgbe.h | 3
> >> drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c | 6 -
> >> drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 196
> >> ++++++++++++++++++++++
> >> 3 files changed, 198 insertions(+), 7 deletions(-)
> >>
> >> diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h
> >> b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
> >> index 4b9156c..09c2d9b 100644
> >> --- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h
> >> +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
> >
> > [...]
> >
> >> @@ -8277,6 +8465,7 @@ static int ixgbe_set_features(struct net_device
> >> *netdev,
> >> */
> >> switch (features & NETIF_F_NTUPLE) {
> >> case NETIF_F_NTUPLE:
> >> + case NETIF_F_HW_TC:
> >> /* turn off ATR, enable perfect filters and reset */
> >> if (!(adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE))
> >> need_reset = true;
> >
> > I think you have a bug here. I don't see how the NETIF_F_HW_TC case will
> > happen after masking 'features' out.
> >
>
> Ah I should have annotated this in the commit msg. I turn the feature
> off by default to enable it the user needs to run
>
> # ethtool -K ethx hw-tc-offload on
>
> this is just a habit of mine to leave new features off by default for
> a bit until I work out some of the kinks. For example I found a case
> today where if you build loops into your u32 graph the hardware tables
> can get out of sync with the software tables. This is sort of extreme
> corner case not sure if anyone would really use u32 but it is valid
> and the hardware should abort correctly.
Yeh - that is nice :) But I was just pointing out on a small typo which I
think you have.
The new case will never happen. You compare: (features & NETIF_F_NTUPLE) ==
NETIF_F_HW_TC
Also the comment before the switch should be modified.
>
> Thanks,
> John
>
