Hi Byeoungwook,
On Wed, Feb 3, 2016 at 1:01 PM, Byeoungwook Kim <quddnr...@gmail.com> wrote:
> rtl_*_delay() functions were reused same codes about addr variable.
> So i have converted to rtl_addr_delay() from code about addr variable.
>
> Signed-off-by: Byeoungwook Kim <quddnr...@gmail.com>
> Reviewed-by: Julian Calaby <julian.cal...@gmail.com>
Just a note for the future, you have to explicitly be given a
reviewed-by, you can't just assume that someone who has made comments
on a patch has reviewed it.
In this case, I have reviewed it, so formally:
Reviewed-by: Julian Calaby <julian.cal...@gmail.com>
Thanks,
Julian Calaby
> ---
> drivers/net/wireless/realtek/rtlwifi/core.c | 28 ++++------------------------
> 1 file changed, 4 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/net/wireless/realtek/rtlwifi/core.c
> b/drivers/net/wireless/realtek/rtlwifi/core.c
> index 05f432c..c1193d1 100644
> --- a/drivers/net/wireless/realtek/rtlwifi/core.c
> +++ b/drivers/net/wireless/realtek/rtlwifi/core.c
> @@ -63,18 +63,8 @@ EXPORT_SYMBOL(rtl_addr_delay);
> void rtl_rfreg_delay(struct ieee80211_hw *hw, enum radio_path rfpath, u32
> addr,
> u32 mask, u32 data)
> {
> - if (addr == 0xfe) {
> - mdelay(50);
> - } else if (addr == 0xfd) {
> - mdelay(5);
> - } else if (addr == 0xfc) {
> - mdelay(1);
> - } else if (addr == 0xfb) {
> - udelay(50);
> - } else if (addr == 0xfa) {
> - udelay(5);
> - } else if (addr == 0xf9) {
> - udelay(1);
> + if (addr >= 0xf9 && addr <= 0xfe) {
> + rtl_addr_delay(addr);
> } else {
> rtl_set_rfreg(hw, rfpath, addr, mask, data);
> udelay(1);
> @@ -84,18 +74,8 @@ EXPORT_SYMBOL(rtl_rfreg_delay);
>
> void rtl_bb_delay(struct ieee80211_hw *hw, u32 addr, u32 data)
> {
> - if (addr == 0xfe) {
> - mdelay(50);
> - } else if (addr == 0xfd) {
> - mdelay(5);
> - } else if (addr == 0xfc) {
> - mdelay(1);
> - } else if (addr == 0xfb) {
> - udelay(50);
> - } else if (addr == 0xfa) {
> - udelay(5);
> - } else if (addr == 0xf9) {
> - udelay(1);
> + if (addr >= 0xf9 && addr <= 0xfe) {
> + rtl_addr_delay(addr);
> } else {
> rtl_set_bbreg(hw, addr, MASKDWORD, data);
> udelay(1);
> --
> 2.5.0
>
--
Julian Calaby
Email: julian.cal...@gmail.com
Profile: http://www.google.com/profiles/julian.calaby/
