From: Elad Raz <el...@mellanox.com>

When a vlan is been configured, remeber the untagged mode of the vlan.
When displaying the list of configured VLANs, show the untagged attribute.

Signed-off-by: Elad Raz <el...@mellanox.com>
Signed-off-by: Jiri Pirko <j...@mellanox.com>
---
 drivers/net/ethernet/mellanox/mlxsw/spectrum.c           | 8 ++++++++
 drivers/net/ethernet/mellanox/mlxsw/spectrum.h           | 1 +
 drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c | 9 ++++++++-
 3 files changed, 17 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c 
b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
index 74ff011..b6f3650 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
@@ -1370,6 +1370,11 @@ static int mlxsw_sp_port_create(struct mlxsw_sp 
*mlxsw_sp, u8 local_port)
                err = -ENOMEM;
                goto err_port_active_vlans_alloc;
        }
+       mlxsw_sp_port->untagged_vlans = kzalloc(bytes, GFP_KERNEL);
+       if (!mlxsw_sp_port->untagged_vlans) {
+               err = -ENOMEM;
+               goto err_port_untagged_vlans_alloc;
+       }
        INIT_LIST_HEAD(&mlxsw_sp_port->vports_list);
 
        mlxsw_sp_port->pcpu_stats =
@@ -1472,6 +1477,8 @@ err_port_module_check:
 err_dev_addr_init:
        free_percpu(mlxsw_sp_port->pcpu_stats);
 err_alloc_stats:
+       kfree(mlxsw_sp_port->untagged_vlans);
+err_port_untagged_vlans_alloc:
        kfree(mlxsw_sp_port->active_vlans);
 err_port_active_vlans_alloc:
        free_netdev(dev);
@@ -1505,6 +1512,7 @@ static void mlxsw_sp_port_remove(struct mlxsw_sp 
*mlxsw_sp, u8 local_port)
        mlxsw_sp_port_vports_fini(mlxsw_sp_port);
        mlxsw_sp_port_switchdev_fini(mlxsw_sp_port);
        free_percpu(mlxsw_sp_port->pcpu_stats);
+       kfree(mlxsw_sp_port->untagged_vlans);
        kfree(mlxsw_sp_port->active_vlans);
        free_netdev(mlxsw_sp_port->dev);
 }
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.h 
b/drivers/net/ethernet/mellanox/mlxsw/spectrum.h
index 463ed6d..7601789 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.h
@@ -144,6 +144,7 @@ struct mlxsw_sp_port {
        } vport;
        /* 802.1Q bridge VLANs */
        unsigned long *active_vlans;
+       unsigned long *untagged_vlans;
        /* VLAN interfaces */
        struct list_head vports_list;
 };
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c 
b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
index d6242cf..614ef57 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
@@ -526,8 +526,13 @@ static int __mlxsw_sp_port_vlans_add(struct mlxsw_sp_port 
*mlxsw_sp_port,
        }
 
        /* Changing activity bits only if HW operation succeded */
-       for (vid = vid_begin; vid <= vid_end; vid++)
+       for (vid = vid_begin; vid <= vid_end; vid++) {
                set_bit(vid, mlxsw_sp_port->active_vlans);
+               if (flag_untagged)
+                       set_bit(vid, mlxsw_sp_port->untagged_vlans);
+               else
+                       clear_bit(vid, mlxsw_sp_port->untagged_vlans);
+       }
 
        /* STP state change must be done after we set active VLANs */
        err = mlxsw_sp_port_stp_state_set(mlxsw_sp_port,
@@ -954,6 +959,8 @@ static int mlxsw_sp_port_vlan_dump(struct mlxsw_sp_port 
*mlxsw_sp_port,
                vlan->flags = 0;
                if (vid == mlxsw_sp_port->pvid)
                        vlan->flags |= BRIDGE_VLAN_INFO_PVID;
+               if (test_bit(vid, mlxsw_sp_port->untagged_vlans))
+                       vlan->flags |= BRIDGE_VLAN_INFO_UNTAGGED;
                vlan->vid_begin = vid;
                vlan->vid_end = vid;
                err = cb(&vlan->obj);
-- 
1.9.3

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to