DSA now expects switches to be true devices with a phandle pointing to
them. Adapt the DT file to this new scheme.
---
arch/arm/boot/dts/vf610-zii-dev-rev-b.dts | 34 ++++++++++++++++++++++++-------
1 file changed, 27 insertions(+), 7 deletions(-)
diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
index 6e657a9312ce..87dc17adb894 100644
--- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
+++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
@@ -77,13 +77,13 @@
#size-cells = <0>;
dsa,ethernet = <&fec1>;
- dsa,mii-bus = <&mdio_mux_1>;
/* 6352 - Primary - 7 ports */
switch0: switch@2 {
#address-cells = <1>;
#size-cells = <0>;
- reg = <0x00 0>;
+ reg = <0 0>;
+ switch = <&switchdev0>;
eeprom-length = <512>;
port@0 {
@@ -121,16 +121,15 @@
full-duplex;
};
};
-
};
/* 6352 - Secondary - 7 ports */
switch1: switch@0 {
#address-cells = <1>;
#size-cells = <0>;
- reg = <0x00 1>;
+ switch = <&switchdev1>;
+ reg = <0 1>;
eeprom-length = <512>;
- mii-bus = <&mdio_mux_2>;
port@0 {
reg = <0>;
@@ -174,8 +173,8 @@
switch2: switch@6 {
#address-cells = <1>;
#size-cells = <0>;
- reg = <0x00 2>;
- mii-bus = <&mdio_mux_4>;
+ switch = <&switchdev2>;
+ reg = <0 2>;
port@0 {
reg = <0>;
@@ -226,6 +225,27 @@
};
};
};
+
+ /* Primary switch */
+ switchdev0: switchdev0 {
+ compatible = "marvell,mv88e6352";
+ mii-bus = <&mdio_mux_1>;
+ addr = <0>;
+ };
+
+ /* Secondary switch */
+ switchdev1: switchdev1 {
+ compatible = "marvell,mv88e6352";
+ mii-bus = <&mdio_mux_2>;
+ addr = <0>;
+ };
+
+ /* 6185 10-port switch */
+ switchdev2: switchdev2 {
+ compatible = "marvell,mv88e6131";
+ mii-bus = <&mdio_mux_4>;
+ addr = <0>;
+ };
};
&iomuxc {
--
2.6.3
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
