From: Neerav Parikh <[email protected]> The firmware has added additional status information to allow software to determine if the APP priority for FCoE/iSCSI/FIP is valid or not in CEE DCBX mode.
This patch adds to support those additional checks and will only add applications to the software table that have oper and sync bits set without any error. Change-ID: I0a76c52427dadf97d4dba4538a3068d05e4eb56b Signed-off-by: Neerav Parikh <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]> --- drivers/net/ethernet/intel/i40e/i40e_dcb.c | 48 ++++++++++++++++++++---------- 1 file changed, 33 insertions(+), 15 deletions(-) diff --git a/drivers/net/ethernet/intel/i40e/i40e_dcb.c b/drivers/net/ethernet/intel/i40e/i40e_dcb.c index 90de46a..9aee35d 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_dcb.c +++ b/drivers/net/ethernet/intel/i40e/i40e_dcb.c @@ -531,37 +531,55 @@ static void i40e_cee_to_dcb_config( dcbcfg->pfc.pfcenable = cee_cfg->oper_pfc_en; dcbcfg->pfc.pfccap = I40E_MAX_TRAFFIC_CLASS; - status = (tlv_status & I40E_AQC_CEE_APP_STATUS_MASK) >> - I40E_AQC_CEE_APP_STATUS_SHIFT; + i = 0; + status = (tlv_status & I40E_AQC_CEE_FCOE_STATUS_MASK) >> + I40E_AQC_CEE_FCOE_STATUS_SHIFT; err = (status & I40E_TLV_STATUS_ERR) ? 1 : 0; sync = (status & I40E_TLV_STATUS_SYNC) ? 1 : 0; oper = (status & I40E_TLV_STATUS_OPER) ? 1 : 0; - /* Add APPs if Error is False and Oper/Sync is True */ + /* Add FCoE APP if Error is False and Oper/Sync is True */ if (!err && sync && oper) { - /* CEE operating configuration supports FCoE/iSCSI/FIP only */ - dcbcfg->numapps = I40E_CEE_OPER_MAX_APPS; - /* FCoE APP */ - dcbcfg->app[0].priority = + dcbcfg->app[i].priority = (app_prio & I40E_AQC_CEE_APP_FCOE_MASK) >> I40E_AQC_CEE_APP_FCOE_SHIFT; - dcbcfg->app[0].selector = I40E_APP_SEL_ETHTYPE; - dcbcfg->app[0].protocolid = I40E_APP_PROTOID_FCOE; + dcbcfg->app[i].selector = I40E_APP_SEL_ETHTYPE; + dcbcfg->app[i].protocolid = I40E_APP_PROTOID_FCOE; + i++; + } + status = (tlv_status & I40E_AQC_CEE_ISCSI_STATUS_MASK) >> + I40E_AQC_CEE_ISCSI_STATUS_SHIFT; + err = (status & I40E_TLV_STATUS_ERR) ? 1 : 0; + sync = (status & I40E_TLV_STATUS_SYNC) ? 1 : 0; + oper = (status & I40E_TLV_STATUS_OPER) ? 1 : 0; + /* Add iSCSI APP if Error is False and Oper/Sync is True */ + if (!err && sync && oper) { /* iSCSI APP */ - dcbcfg->app[1].priority = + dcbcfg->app[i].priority = (app_prio & I40E_AQC_CEE_APP_ISCSI_MASK) >> I40E_AQC_CEE_APP_ISCSI_SHIFT; - dcbcfg->app[1].selector = I40E_APP_SEL_TCPIP; - dcbcfg->app[1].protocolid = I40E_APP_PROTOID_ISCSI; + dcbcfg->app[i].selector = I40E_APP_SEL_TCPIP; + dcbcfg->app[i].protocolid = I40E_APP_PROTOID_ISCSI; + i++; + } + status = (tlv_status & I40E_AQC_CEE_FIP_STATUS_MASK) >> + I40E_AQC_CEE_FIP_STATUS_SHIFT; + err = (status & I40E_TLV_STATUS_ERR) ? 1 : 0; + sync = (status & I40E_TLV_STATUS_SYNC) ? 1 : 0; + oper = (status & I40E_TLV_STATUS_OPER) ? 1 : 0; + /* Add FIP APP if Error is False and Oper/Sync is True */ + if (!err && sync && oper) { /* FIP APP */ - dcbcfg->app[2].priority = + dcbcfg->app[i].priority = (app_prio & I40E_AQC_CEE_APP_FIP_MASK) >> I40E_AQC_CEE_APP_FIP_SHIFT; - dcbcfg->app[2].selector = I40E_APP_SEL_ETHTYPE; - dcbcfg->app[2].protocolid = I40E_APP_PROTOID_FIP; + dcbcfg->app[i].selector = I40E_APP_SEL_ETHTYPE; + dcbcfg->app[i].protocolid = I40E_APP_PROTOID_FIP; + i++; } + dcbcfg->numapps = i; } /** -- 2.4.3 -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
