From: Alex Williamson <[email protected]> When the .remove() callback for a PF is called, SR-IOV support for the device is disabled, which requires unbinding and removing the VFs. The VFs may be in-use either by the host kernel or userspace, such as assigned to a VM through vfio-pci. In this latter case, the VFs may be removed either by shutting down the VM or hot-unplugging the devices from the VM. Unfortunately in the case of a Windows 2012 R2 guest, hot-unplug is broken due to the ordering of the PF driver teardown. Disabling SR-IOV prior to unregister_netdev() avoids this issue.
Signed-off-by: Alex Williamson <[email protected]> Acked-by: Mitch Williams <[email protected]> Tested-by: Krishneil Singh <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]> --- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index b9267e2..c04480e 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -9028,12 +9028,12 @@ static void ixgbe_remove(struct pci_dev *pdev) /* remove the added san mac */ ixgbe_del_sanmac_netdev(netdev); - if (netdev->reg_state == NETREG_REGISTERED) - unregister_netdev(netdev); - #ifdef CONFIG_PCI_IOV ixgbe_disable_sriov(adapter); #endif + if (netdev->reg_state == NETREG_REGISTERED) + unregister_netdev(netdev); + ixgbe_clear_interrupt_scheme(adapter); ixgbe_release_hw_control(adapter); -- 2.4.3 -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
