On Tue, Aug 25, 2015 at 01:56:19PM -0700, Stephen Hemminger wrote: > On Mon, 24 Aug 2015 21:16:15 -0400 > Andy Gospodarek <go...@cumulusnetworks.com> wrote: > > > This adds support for slightly less output than is normally provided by > > 'ip link show' and 'ip addr show'. This is a bit better when you have a > > host with lots of interfaces. Sample output: > > > > $ ip -br link show > > lo UNKNOWN 00:00:00:00:00:00 <LOOPBACK,UP,LOWER_UP> > > p7p1 UP 08:00:27:9d:62:9f > > <BROADCAST,MULTICAST,UP,LOWER_UP> > > p8p1 DOWN 08:00:27:dc:d8:ca > > <NO-CARRIER,BROADCAST,MULTICAST,UP> > > p9p1 UP 08:00:27:76:d9:75 > > <BROADCAST,MULTICAST,UP,LOWER_UP> > > p7p1.100@p7p1 UP 08:00:27:9d:62:9f > > <BROADCAST,MULTICAST,UP,LOWER_UP> > > > > $ ip -br -4 addr show > > lo UNKNOWN 127.0.0.1/8 > > p7p1 UP 70.0.0.1/24 > > p8p1 DOWN 80.0.0.1/24 > > p7p1.100@p7p1 UP 200.0.0.1/24 > > > > $ ip -br -6 addr show > > lo UNKNOWN ::1/128 > > p7p1 UP 7000::1/8 fe80::a00:27ff:fe9d:629f/64 > > p8p1 DOWN 8000::1/8 > > p9p1 UP fe80::a00:27ff:fe76:d975/64 > > p7p1.100@p7p1 UP fe80::a00:27ff:fe9d:629f/64 > > > > $ ip -br addr show p7p1 > > p7p1 UP 70.0.0.1/24 7000::1/8 fe80::a00:27ff:fe9d:629f/64 > > > > v2: Now with color support! > > > > Signed-off-by: Andy Gospodarek <go...@cumulusnetworks.com> > > Generally good idea but formatting is off. > missing whitespace after mac address also LOWERLAYERDOWN is too long. Excellent cut and paste work for the color support. :-(
> $ ./ip/ip -br li show > lo UNKNOWN 00:00:00:00:00:00<LOOPBACK,UP,LOWER_UP> > eth1 DOWN 00:25:90:86:b3:6b<BROADCAST,MULTICAST> > eth0 UP 00:25:90:86:b3:6a<BROADCAST,MULTICAST,UP,LOWER_UP> > eth2 DOWN 00:1b:21:a0:e7:06<NO-CARRIER,BROADCAST,MULTICAST,UP> > virbr4@NONE LOWERLAYERDOWN > 52:54:00:e5:6c:94<NO-CARRIER,BROADCAST,MULTICAST,UP> Ouch! > virbr4-nic@NONE DOWN 52:54:00:e5:6c:94<BROADCAST,MULTICAST> > virbr0@NONE UP 52:54:00:6b:fb:93<BROADCAST,MULTICAST,UP,LOWER_UP> > virbr0-nic@NONE DOWN 52:54:00:6b:fb:93<BROADCAST,MULTICAST> > vnet0@NONE UNKNOWN fe:54:00:08:c5:41<BROADCAST,MULTICAST,UP,LOWER_UP> > tun1@NONE UNKNOWN <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> > tun0@NONE UNKNOWN <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> I did some work at one point to make those fields variable width, but abandoned it. Maybe worth checking out again. -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
