The patch series is to add fec support for i.MX7d sdb board. Since i.MX7d fec
ip is
the same as i.MX6SX, so there have no change for driver itself.
Patch#1: add bcm54220 PHY ID entry into brcmphy.h file.
Patch#2: add new iomux-gpr file to define iomux-gpr register and field for
i.MX7d.
Patch#3: i.MX7d sdb board install bcm54220 phy, i.MX7d arm2 board install
AR8031 phy.
For the two phys, there needs extra phy setting, so package the
setting to fixup.
Patch#4~6: Add fec dts node and pinmux setting in dts file.
Fugang Duan (6):
net: phy: broadcom: add bcm54220 phy ID
ARM: imx7d: add imx7d iomux-gpr field define
ARM: imx: add enet init for i.MX7D platform
ARM: dts: imx: pinfunc: add GPIO1 pin define for i.MX7d
ARM: dts: imx7d: add fec1 and fec2 support for i.MX7d soc
ARM: dts: imx7d-sdb: add fec1 and fec2 support
arch/arm/boot/dts/imx7d-pinfunc.h | 115 +++++++++++++++++++++++++++++
arch/arm/boot/dts/imx7d-sdb.dts | 76 ++++++++++++++++++-
arch/arm/boot/dts/imx7d.dtsi | 36 +++++++++
arch/arm/mach-imx/mach-imx7d.c | 75 ++++++++++++++++++-
include/linux/brcmphy.h | 1 +
include/linux/mfd/syscon/imx7-iomuxc-gpr.h | 49 ++++++++++++
6 files changed, 349 insertions(+), 3 deletions(-)
create mode 100644 include/linux/mfd/syscon/imx7-iomuxc-gpr.h
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
