On Wed, Aug 05, 2015 at 06:15:37PM +0100, Ryan Harkin wrote:
> On 5 August 2015 at 16:50, Liviu Dudau <[1]liviu.du...@arm.com> wrote:
>
> For designs where EEPROMs are not connected to PCI Yukon2
> chips we need to get the MAC address from the firmware.
> Add a module parameter called 'mac_address' for this. It
> will be used if no DT node can be found and the B2_MAC
> register holds an invalid value.
>
> Signed-off-by: Liviu Dudau <[2]liviu.du...@arm.com>
>
> Looks good to me. FWIW, you can have a tested or reviewed-by at your
> preference:
> Tested-by: Ryan Harkin <[3]ryan.har...@linaro.org>
> Reviewed-by: Ryan Harkin <[4]ryan.har...@linaro.org>
>
Thanks Ryan, I think one can provide both tags, so I will use them together.
Best regards,
Liviu
>
>
> ---
> drivers/net/ethernet/marvell/sky2.c | 14 +++++++++++++-
> 1 file changed, 13 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/ethernet/marvell/sky2.c
> b/drivers/net/ethernet/marvell/sky2.c
> index d9f4498..a977d95 100644
> --- a/drivers/net/ethernet/marvell/sky2.c
> +++ b/drivers/net/ethernet/marvell/sky2.c
> @@ -101,6 +101,10 @@ static int legacy_pme = 0;
> module_param(legacy_pme, int, 0);
> MODULE_PARM_DESC(legacy_pme, "Legacy power management");
>
> +/* Ugh! Let the firmware tell us the hardware address */
> +static int mac_address[ETH_ALEN] = { 0, };
> +module_param_array(mac_address, int, NULL, 0);
> +
> static const struct pci_device_id sky2_id_table[] = {
> { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) }, /* SK-9Sxx */
> { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) }, /* SK-9Exx */
> @@ -4811,13 +4815,21 @@ static struct net_device
> *sky2_init_netdev(struct sky2_hw *hw, unsigned port,
> /* try to get mac address in the following order:
> * 1) from device tree data
> * 2) from internal registers set by bootloader
> + * 3) from the command line parameter
> */
> iap = of_get_mac_address(hw->pdev->dev.of_node);
> if (iap)
> memcpy(dev->dev_addr, iap, ETH_ALEN);
> - else
> + else {
> memcpy_fromio(dev->dev_addr, hw->regs + B2_MAC_1 + port
> * 8,
> ETH_ALEN);
> + if (!is_valid_ether_addr(&dev->dev_addr[0])) {
> + int i;
> +
> + for (i = 0; i < ETH_ALEN; i++)
> + dev->dev_addr[i] = mac_address[i];
> + }
> + }
>
> return dev;
> }
> --
> 2.4.6
>
> References
>
> Visible links
> 1. mailto:liviu.du...@arm.com
> 2. mailto:liviu.du...@arm.com
> 3. mailto:ryan.har...@linaro.org
> 4. mailto:ryan.har...@linaro.org
--
====================
| I would like to |
| fix the world, |
| but they're not |
| giving me the |
\ source code! /
---------------
¯\_(ツ)_/¯
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
