On Tue, 2015-07-28 at 15:36 +0800, Hayes Wang wrote:
> Add rtl8152_pre_reset() and rtl8152_post_reset() which are used when
> calling usb_reset_device(). The two functions could reduce the time
> of reset when calling usb_reset_device() after probe().
>
> Signed-off-by: Hayes Wang <hayesw...@realtek.com>
> ---
> drivers/net/usb/r8152.c | 68
> +++++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 68 insertions(+)
>
> diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
> index 144dc64..a6caa60 100644
> --- a/drivers/net/usb/r8152.c
> +++ b/drivers/net/usb/r8152.c
> @@ -3342,6 +3342,72 @@ static void r8153_init(struct r8152 *tp)
> r8153_u2p3en(tp, true);
> }
>
> +static int rtl8152_pre_reset(struct usb_interface *intf)
> +{
> + struct r8152 *tp = usb_get_intfdata(intf);
> + struct net_device *netdev;
> + int ret;
> +
> + if (intf->condition != USB_INTERFACE_BOUND || !tp)
If the interface weren't bound, you wouldn't be called.
> + return 0;
> +
> + netdev = tp->netdev;
> + if (!netif_running(netdev))
> + return 0;
> +
> + ret = usb_autopm_get_interface(intf);
> + if (ret < 0)
> + return ret;
What sense does this make?
> +
> + napi_disable(&tp->napi);
> + clear_bit(WORK_ENABLE, &tp->flags);
> + usb_kill_urb(tp->intr_urb);
> + cancel_delayed_work_sync(&tp->schedule);
> + if (netif_carrier_ok(netdev)) {
> + netif_stop_queue(netdev);
> + mutex_lock(&tp->control);
> + tp->rtl_ops.disable(tp);
> + mutex_unlock(&tp->control);
> + }
> +
> + usb_autopm_put_interface(intf);
> +
> + return 0;
> +}
> +
> +static int rtl8152_post_reset(struct usb_interface *intf)
> +{
> + struct r8152 *tp = usb_get_intfdata(intf);
> + struct net_device *netdev;
> + int ret;
> +
> + if (intf->condition != USB_INTERFACE_BOUND || !tp)
Again unnecessary
> + return 0;
> +
> + netdev = tp->netdev;
> + if (!netif_running(netdev))
> + return 0;
> +
> + ret = usb_autopm_get_interface(intf);
The device will be awake.
> + if (ret < 0)
> + return ret;
> +
> + set_bit(WORK_ENABLE, &tp->flags);
> + if (netif_carrier_ok(netdev)) {
> + mutex_lock(&tp->control);
> + tp->rtl_ops.enable(tp);
> + rtl8152_set_rx_mode(netdev);
> + mutex_unlock(&tp->control);
> + netif_wake_queue(netdev);
> + }
> +
> + napi_enable(&tp->napi);
> +
> + usb_autopm_put_interface(intf);
> +
> + return ret;
> +}
> +
HTH
Oliver
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
