Reviewed-by: Alexey Khoroshilov <khoroshi...@ispras.ru> with small
suggestion. If we restore kmemdup() call, we have to handle ENOMEM
situations:
fw = kmemdup(fw_entry->data, fw_entry->size, GFP_KERNEL);
if (!fw)
return -ENOMEM;
On 27.07.2015 12:43, Mike Looijmans wrote:
> Fixes commit eae79b4f3e82ca63a53478a161b190a0d38fe526 ("rsi: fix memory leak
> in rsi_load_ta_instructions()") which stopped the driver from functioning.
>
> Firmware data has been allocated using vmalloc(), resulting in memory
> that cannot be used for DMA. Hence the firmware was first copied to a
> buffer allocated with kmalloc() in the original code. This patch reverts
> the commit and only calls "kfree()" to release the buffer after sending
> the data. This fixes the memory leak without breaking the driver.
>
> Add a comment to the kmemdup() calls to explain why this is done.
>
> Tested on a Topic Miami-Florida board which contains the rsi SDIO chip.
>
> Also added the same kfree() call to the USB glue driver. This was not
> tested on actual hardware though, as I only have the SDIO version.
>
> Signed-off-by: Mike Looijmans <mike.looijm...@topic.nl>
> Cc: sta...@vger.kernel.org
> ---
> drivers/net/wireless/rsi/rsi_91x_sdio_ops.c | 6 +++++-
> drivers/net/wireless/rsi/rsi_91x_usb_ops.c | 2 ++
> 2 files changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/wireless/rsi/rsi_91x_sdio_ops.c
> b/drivers/net/wireless/rsi/rsi_91x_sdio_ops.c
> index b6cc9ff..5c37a71 100644
> --- a/drivers/net/wireless/rsi/rsi_91x_sdio_ops.c
> +++ b/drivers/net/wireless/rsi/rsi_91x_sdio_ops.c
> @@ -172,6 +172,7 @@ static int rsi_load_ta_instructions(struct rsi_common
> *common)
> (struct rsi_91x_sdiodev *)adapter->rsi_dev;
> u32 len;
> u32 num_blocks;
> + const u8 *fw;
> const struct firmware *fw_entry = NULL;
> u32 block_size = dev->tx_blk_size;
> int status = 0;
> @@ -200,6 +201,8 @@ static int rsi_load_ta_instructions(struct rsi_common
> *common)
> return status;
> }
>
> + /* Copy firmware into DMA-accessible memory */
> + fw = kmemdup(fw_entry->data, fw_entry->size, GFP_KERNEL);
> len = fw_entry->size;
>
> if (len % 4)
> @@ -210,7 +213,8 @@ static int rsi_load_ta_instructions(struct rsi_common
> *common)
> rsi_dbg(INIT_ZONE, "%s: Instruction size:%d\n", __func__, len);
> rsi_dbg(INIT_ZONE, "%s: num blocks: %d\n", __func__, num_blocks);
>
> - status = rsi_copy_to_card(common, fw_entry->data, len, num_blocks);
> + status = rsi_copy_to_card(common, fw, len, num_blocks);
> + kfree(fw);
> release_firmware(fw_entry);
> return status;
> }
> diff --git a/drivers/net/wireless/rsi/rsi_91x_usb_ops.c
> b/drivers/net/wireless/rsi/rsi_91x_usb_ops.c
> index 1106ce7..088e28e 100644
> --- a/drivers/net/wireless/rsi/rsi_91x_usb_ops.c
> +++ b/drivers/net/wireless/rsi/rsi_91x_usb_ops.c
> @@ -146,6 +146,7 @@ static int rsi_load_ta_instructions(struct rsi_common
> *common)
> return status;
> }
>
> + /* Copy firmware into DMA-accessible memory */
> fw = kmemdup(fw_entry->data, fw_entry->size, GFP_KERNEL);
> len = fw_entry->size;
>
> @@ -158,6 +159,7 @@ static int rsi_load_ta_instructions(struct rsi_common
> *common)
> rsi_dbg(INIT_ZONE, "%s: num blocks: %d\n", __func__, num_blocks);
>
> status = rsi_copy_to_card(common, fw, len, num_blocks);
> + kfree(fw);
> release_firmware(fw_entry);
> return status;
> }
>
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
