From: Don Skidmore <donald.c.skidm...@intel.com>
Even though X550 may later clear this value for certain devices
set it initially to support copper.
Signed-off-by: Don Skidmore <donald.c.skidm...@intel.com>
Tested-by: Krishneil Singh <krishneil.k.si...@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirs...@intel.com>
---
drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
index d65327e..bb1439c 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
@@ -1,7 +1,7 @@
/*******************************************************************************
*
* Intel 10 Gigabit PCI Express Linux driver
- * Copyright(c) 1999 - 2014 Intel Corporation.
+ * Copyright(c) 1999 - 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
@@ -1855,6 +1855,7 @@ static struct ixgbe_eeprom_operations eeprom_ops_X550EM_x
= {
.read_reg = &ixgbe_read_phy_reg_generic, \
.write_reg = &ixgbe_write_phy_reg_generic, \
.setup_link = &ixgbe_setup_phy_link_generic, \
+ .set_phy_power = &ixgbe_set_copper_phy_power, \
.check_overtemp = &ixgbe_tn_check_overtemp, \
.get_firmware_version = &ixgbe_get_phy_firmware_version_generic,
@@ -1864,7 +1865,6 @@ static struct ixgbe_phy_operations phy_ops_X550 = {
.identify = &ixgbe_identify_phy_generic,
.read_i2c_combined = &ixgbe_read_i2c_combined_generic,
.write_i2c_combined = &ixgbe_write_i2c_combined_generic,
- .set_phy_power = &ixgbe_set_copper_phy_power,
};
static struct ixgbe_phy_operations phy_ops_X550EM_x = {
--
2.4.2
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
