This RFC is based on v4.1-rc3.
It is meant to get a glance to the commits responsible to implement the
necessary NDOs between DSA and the Marvell 88E6352 switch driver.
With this support, I am able to create VLANs with (un)tagged ports, setting
their default VID, from a bridge.
To create a bridge containing all switch ports, with a VLAN ID 400, swp2 and
swp3 untagged (pvid), and swp4 tagged, the userspace commands look like this:
ip link add name br0 type bridge
[...]
ip link set dev swp2 up master br0
[...]
bridge vlan add vid 400 pvid untagged dev swp2
bridge vlan add vid 400 pvid untagged dev swp3
bridge vlan add vid 400 dev swp4
[...]
ip link add link br0 name br0.400 type vlan id 400
[...]
bridge vlan add dev br0 vid 400 self
The code is currently being rebased to the latest net-next/master.
Seems like the way to go now is through switchdev attr getter/setter...
Vivien Didelot (3):
net: dsa: add basic support for VLAN ndo
net: dsa: mv88e6xxx: add support for VTU operations
net: dsa: mv88e6352: add support for VLAN
drivers/net/dsa/mv88e6352.c | 3 +
drivers/net/dsa/mv88e6xxx.c | 309 ++++++++++++++++++++++++++++++++++++++++++++
drivers/net/dsa/mv88e6xxx.h | 28 ++++
include/net/dsa.h | 9 ++
net/dsa/slave.c | 76 ++++++++++-
5 files changed, 423 insertions(+), 2 deletions(-)
--
2.4.1
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
