[snip]
>>> What other info from me is required?
>
> boot log please. with the patch and reverting the patch.
Here they are (attached).
BTW, I found, that the sky2 adapter is broken by this patch as well.
To simplify the analysis, here's their diff:
--- bad-log 2008-02-06 10:06:40.000000000 +0300
+++ good-log 2008-02-06 10:06:40.000000000 +0300
@@ -1,4 +1,4 @@
-Linux version 2.6.24 ([EMAIL PROTECTED]) (gcc version 4.1.3 20070724
(prerelease) (SUSE Linux)) #22 SMP Tue Feb 5 20:09:11 MSK 2008
+Linux version 2.6.24 ([EMAIL PROTECTED]) (gcc version 4.1.3 20070724
(prerelease) (SUSE Linux)) #23 SMP Wed Feb 6 10:03:53 MSK 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
@@ -19,29 +19,6 @@ Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
found SMP MP-table at [c00ff780] 000ff780
-***************
-**** WARNING: likely BIOS bug
-**** MTRRs don't cover all of memory, trimmed 786432 pages
-***************
-update e820 for mtrr
-modified physical RAM map:
- modified: 0000000000000000 - 000000000009f800 (usable)
- modified: 000000000009f800 - 00000000000a0000 (reserved)
- modified: 00000000000e0000 - 0000000000100000 (reserved)
- modified: 0000000000100000 - 0000000040000000 (usable)
- modified: 0000000040000000 - 00000000bfff0000 (reserved)
- modified: 00000000bfff0000 - 00000000bffff000 (ACPI data)
- modified: 00000000bffff000 - 00000000c0000000 (ACPI NVS)
- modified: 00000000c0000000 - 0000000100000000 (reserved)
- modified: 0000000100000000 - 0000000140000000 (usable)
-Warning only 4GB will be used.
-Use a HIGHMEM64G enabled kernel.
-3200MB HIGHMEM available.
-896MB LOWMEM available.
-Scan SMP from c0000000 for 1024 bytes.
-Scan SMP from c009fc00 for 1024 bytes.
-Scan SMP from c00f0000 for 65536 bytes.
-found SMP MP-table at [c00ff780] 000ff780
Entering add_active_range(0, 0, 1048576) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
@@ -69,7 +46,7 @@ I/O APIC #7 Version 32 at 0xFEC00000.
I/O APIC #8 Version 32 at 0xFEC10000.
Enabling APIC mode: Flat. Using 2 I/O APICs
Processors: 2
-Allocating PCI resources starting at 10100000 (gap: 10000000:00400000)
+Allocating PCI resources starting at c4000000 (gap: c0000000:3ec00000)
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1040384
Kernel command line: ro root=08:02 ignore_loglevel
debug: ignoring loglevel setting.
@@ -80,22 +57,22 @@ Enabling fast FPU save and restore... do
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
-Detected 3192.350 MHz processor.
+Detected 3192.343 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1011264k/4194304k available (1357k kernel code, 36260k reserved, 594k
data, 168k init, 131072k highmem)
+Memory: 3108104k/4194304k available (1357k kernel code, 36260k reserved, 594k
data, 168k init, 2228024k highmem)
virtual kernel memory layout:
fixmap : 0xfffa0000 - 0xfffff000 ( 380 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc05f0000 - 0xc061a000 ( 168 kB)
- .data : 0xc055375e - 0xc05e8088 ( 594 kB)
- .text : 0xc0400000 - 0xc055375e (1357 kB)
+ .data : 0xc0553754 - 0xc05e8088 ( 594 kB)
+ .text : 0xc0400000 - 0xc0553754 (1357 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
-Calibrating delay using timer specific routine.. 6387.02 BogoMIPS (lpj=3193513)
+Calibrating delay using timer specific routine.. 6387.05 BogoMIPS (lpj=3193528)
Mount-cache hash table entries: 512
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
@@ -119,7 +96,7 @@ Intel machine check reporting enabled on
CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
CPU1: Thermal monitoring enabled
CPU1: Intel(R) Xeon(TM) CPU 3.20GHz stepping 01
-Total of 2 processors activated (12770.19 BogoMIPS).
+Total of 2 processors activated (12770.22 BogoMIPS).
ExtINT not setup in hardware but reported by MP table
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
@@ -153,41 +130,22 @@ PCI->APIC IRQ transform: 0000:00:1f.3[B]
PCI->APIC IRQ transform: 0000:02:00.0[A] -> IRQ 16
PCI->APIC IRQ transform: 0000:04:02.0[A] -> IRQ 17
PCI->APIC IRQ transform: 0000:04:03.0[A] -> IRQ 16
-PCI: Cannot allocate resource region 8 of bridge 0000:00:03.0
-PCI: Cannot allocate resource region 8 of bridge 0000:00:1e.0
-PCI: Cannot allocate resource region 0 of device 0000:00:1d.4
-PCI: Cannot allocate resource region 0 of device 0000:00:1d.7
-PCI: Cannot allocate resource region 0 of device 0000:02:00.0
-PCI: Cannot allocate resource region 0 of device 0000:04:02.0
-PCI: Cannot allocate resource region 2 of device 0000:04:02.0
-PCI: Cannot allocate resource region 0 of device 0000:04:03.0
-PCI: Failed to allocate mem resource #8:[EMAIL PROTECTED] for 0000:00:03.0
-PCI: Failed to allocate mem resource #9:[EMAIL PROTECTED] for 0000:00:03.0
-PCI: Failed to allocate mem resource #0:[EMAIL PROTECTED] for 0000:00:1d.7
-PCI: Failed to allocate mem resource #5:[EMAIL PROTECTED] for 0000:00:1f.1
-PCI: Failed to allocate mem resource #0:[EMAIL PROTECTED] for 0000:00:1d.4
PCI: Bridge: 0000:00:02.0
-Time: tsc clocksource has been installed.
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
-PCI: Failed to allocate mem resource #6:[EMAIL PROTECTED] for 0000:02:00.0
-PCI: Failed to allocate mem resource #0:[EMAIL PROTECTED] for 0000:02:00.0
PCI: Bridge: 0000:00:03.0
IO window: d000-dfff
- MEM window: disabled.
+Time: tsc clocksource has been installed.
+ MEM window: dee00000-deefffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
-PCI: Failed to allocate mem resource #0:[EMAIL PROTECTED] for 0000:04:02.0
-PCI: Failed to allocate mem resource #6:[EMAIL PROTECTED] for 0000:04:02.0
-PCI: Failed to allocate mem resource #0:[EMAIL PROTECTED] for 0000:04:03.0
-PCI: Failed to allocate mem resource #2:[EMAIL PROTECTED] for 0000:04:02.0
PCI: Bridge: 0000:00:1e.0
IO window: e000-efff
- MEM window: disabled.
+ MEM window: def00000-dfffffff
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:02.0 to 64
PCI: Setting latency timer of device 0000:00:03.0 to 64
@@ -254,10 +212,11 @@ Freeing unused kernel memory: 168k freed
warning: process `kmodule' used the deprecated sysctl system call with 1.23.
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
Copyright (c) 1999-2006 Intel Corporation.
-e1000: probe of 0000:04:03.0 failed with error -5
+e1000: 0000:04:03.0: e1000_probe: (PCI:33MHz:32-bit) 00:0e:0c:3b:d8:8b
+e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
PCI: Setting latency timer of device 0000:02:00.0 to 64
-sky2 0000:02:00.0: unsupported chip type 0xe0
-sky2: probe of 0000:02:00.0 failed with error -95
+sky2 0000:02:00.0: v1.21 addr 0xdeefc000 irq 16 Yukon-EC (0xb6) rev 2
+sky2 eth1: addr 00:0e:0c:3b:d8:8a
intel_rng: FWH not detected
EXT3 FS on sda2, internal journal
kjournald starting. Commit interval 5 seconds
@@ -266,3 +225,4 @@ EXT3-fs: mounted filesystem with ordered
warning: process `kudzu' used the deprecated sysctl system call with 1.23.
warning: process `kudzu' used the deprecated sysctl system call with 1.49.
warning: process `kudzu' used the deprecated sysctl system call with 1.49.
+e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow
Control: RX
> Thanks
>
> YH
>
Linux version 2.6.24 ([EMAIL PROTECTED]) (gcc version 4.1.3 20070724
(prerelease) (SUSE Linux)) #22 SMP Tue Feb 5 20:09:11 MSK 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bffce0e5 (usable)
BIOS-e820: 00000000bffce0e5 - 00000000bfff0000 (reserved)
BIOS-e820: 00000000bfff0000 - 00000000bffff000 (ACPI data)
BIOS-e820: 00000000bffff000 - 00000000c0000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec86000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
Warning only 4GB will be used.
Use a HIGHMEM64G enabled kernel.
3200MB HIGHMEM available.
896MB LOWMEM available.
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
found SMP MP-table at [c00ff780] 000ff780
***************
**** WARNING: likely BIOS bug
**** MTRRs don't cover all of memory, trimmed 786432 pages
***************
update e820 for mtrr
modified physical RAM map:
modified: 0000000000000000 - 000000000009f800 (usable)
modified: 000000000009f800 - 00000000000a0000 (reserved)
modified: 00000000000e0000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 0000000040000000 (usable)
modified: 0000000040000000 - 00000000bfff0000 (reserved)
modified: 00000000bfff0000 - 00000000bffff000 (ACPI data)
modified: 00000000bffff000 - 00000000c0000000 (ACPI NVS)
modified: 00000000c0000000 - 0000000100000000 (reserved)
modified: 0000000100000000 - 0000000140000000 (usable)
Warning only 4GB will be used.
Use a HIGHMEM64G enabled kernel.
3200MB HIGHMEM available.
896MB LOWMEM available.
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
found SMP MP-table at [c00ff780] 000ff780
Entering add_active_range(0, 0, 1048576) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 1048576
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 1048576
On node 0 totalpages: 1048576
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 6400 pages used for memmap
HighMem zone: 812800 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
DMI 2.3 present.
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: INTEL Product ID: SE7320EP20 APIC at: 0xFEE00000
Processor #0 15:4 APIC version 20
Processor #6 15:4 APIC version 20
I/O APIC #7 Version 32 at 0xFEC00000.
I/O APIC #8 Version 32 at 0xFEC10000.
Enabling APIC mode: Flat. Using 2 I/O APICs
Processors: 2
Allocating PCI resources starting at 10100000 (gap: 10000000:00400000)
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1040384
Kernel command line: ro root=08:02 ignore_loglevel
debug: ignoring loglevel setting.
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
mapped IOAPIC to ffff9000 (fec10000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 3192.350 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1011264k/4194304k available (1357k kernel code, 36260k reserved, 594k
data, 168k init, 131072k highmem)
virtual kernel memory layout:
fixmap : 0xfffa0000 - 0xfffff000 ( 380 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc05f0000 - 0xc061a000 ( 168 kB)
.data : 0xc055375e - 0xc05e8088 ( 594 kB)
.text : 0xc0400000 - 0xc055375e (1357 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 6387.02 BogoMIPS (lpj=3193513)
Mount-cache hash table entries: 512
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Hyper-Threading is disabled
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
CPU0: Thermal monitoring enabled
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 15k freed
CPU0: Intel(R) Xeon(TM) CPU 3.20GHz stepping 01
Booting processor 1/6 ip 2000
Initializing CPU#1
Calibrating delay using timer specific routine.. 6383.16 BogoMIPS (lpj=3191582)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Hyper-Threading is disabled
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
CPU1: Thermal monitoring enabled
CPU1: Intel(R) Xeon(TM) CPU 3.20GHz stepping 01
Total of 2 processors activated (12770.19 BogoMIPS).
ExtINT not setup in hardware but reported by MP table
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
net_namespace: 164 bytes
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=4
PCI: Using configuration type 1
Setting up standard PCI resources
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0480-04bf claimed by ICH4 GPIO
PCI: Transparent bridge - 0000:00:1e.0
PCI: Discovered primary peer bus ff [IRQ]
PCI: Using IRQ router PIIX/ICH [8086/25a1] at 0000:00:1f.0
PCI->APIC IRQ transform: 0000:00:02.0[A] -> IRQ 16
PCI->APIC IRQ transform: 0000:00:03.0[A] -> IRQ 16
PCI->APIC IRQ transform: 0000:00:1d.0[A] -> IRQ 16
PCI->APIC IRQ transform: 0000:00:1d.1[B] -> IRQ 19
PCI->APIC IRQ transform: 0000:00:1d.7[D] -> IRQ 23
PCI->APIC IRQ transform: 0000:00:1f.1[A] -> IRQ 18
PCI->APIC IRQ transform: 0000:00:1f.2[A] -> IRQ 18
PCI->APIC IRQ transform: 0000:00:1f.3[B] -> IRQ 17
PCI->APIC IRQ transform: 0000:02:00.0[A] -> IRQ 16
PCI->APIC IRQ transform: 0000:04:02.0[A] -> IRQ 17
PCI->APIC IRQ transform: 0000:04:03.0[A] -> IRQ 16
PCI: Cannot allocate resource region 8 of bridge 0000:00:03.0
PCI: Cannot allocate resource region 8 of bridge 0000:00:1e.0
PCI: Cannot allocate resource region 0 of device 0000:00:1d.4
PCI: Cannot allocate resource region 0 of device 0000:00:1d.7
PCI: Cannot allocate resource region 0 of device 0000:02:00.0
PCI: Cannot allocate resource region 0 of device 0000:04:02.0
PCI: Cannot allocate resource region 2 of device 0000:04:02.0
PCI: Cannot allocate resource region 0 of device 0000:04:03.0
PCI: Failed to allocate mem resource #8:[EMAIL PROTECTED] for 0000:00:03.0
PCI: Failed to allocate mem resource #9:[EMAIL PROTECTED] for 0000:00:03.0
PCI: Failed to allocate mem resource #0:[EMAIL PROTECTED] for 0000:00:1d.7
PCI: Failed to allocate mem resource #5:[EMAIL PROTECTED] for 0000:00:1f.1
PCI: Failed to allocate mem resource #0:[EMAIL PROTECTED] for 0000:00:1d.4
PCI: Bridge: 0000:00:02.0
Time: tsc clocksource has been installed.
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Failed to allocate mem resource #6:[EMAIL PROTECTED] for 0000:02:00.0
PCI: Failed to allocate mem resource #0:[EMAIL PROTECTED] for 0000:02:00.0
PCI: Bridge: 0000:00:03.0
IO window: d000-dfff
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Failed to allocate mem resource #0:[EMAIL PROTECTED] for 0000:04:02.0
PCI: Failed to allocate mem resource #6:[EMAIL PROTECTED] for 0000:04:02.0
PCI: Failed to allocate mem resource #0:[EMAIL PROTECTED] for 0000:04:03.0
PCI: Failed to allocate mem resource #2:[EMAIL PROTECTED] for 0000:04:02.0
PCI: Bridge: 0000:00:1e.0
IO window: e000-efff
MEM window: disabled.
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:02.0 to 64
PCI: Setting latency timer of device 0000:00:03.0 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
highmem bounce pool size: 64 pages
io scheduler noop registered
io scheduler anticipatory registered (default)
Boot video device is 0000:04:02.0
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
loop: module loaded
Driver 'sd' needs updating - please use bus_type methods
ata_piix 0000:00:1f.1: version 2.12
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
ata1.00: ATAPI: TEAC DV-516G, F4S6, max UDMA/33
ata1.00: configured for UDMA/33
scsi 0:0:0:0: CD-ROM TEAC DV-516G F4S6 PQ: 0 ANSI: 5
ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc000 irq 18
ata4: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xc008 irq 18
ata4.00: ATA-7: ST3200826AS, 3.03, max UDMA/133
ata4.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA ST3200826AS 3.03 PQ: 0 ANSI: 5
sd 3:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sd 3:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 >
sd 3:0:0:0: [sda] Attached SCSI disk
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 168k freed
warning: process `kmodule' used the deprecated sysctl system call with 1.23.
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
Copyright (c) 1999-2006 Intel Corporation.
e1000: probe of 0000:04:03.0 failed with error -5
PCI: Setting latency timer of device 0000:02:00.0 to 64
sky2 0000:02:00.0: unsupported chip type 0xe0
sky2: probe of 0000:02:00.0 failed with error -95
intel_rng: FWH not detected
EXT3 FS on sda2, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
warning: process `kudzu' used the deprecated sysctl system call with 1.23.
warning: process `kudzu' used the deprecated sysctl system call with 1.49.
warning: process `kudzu' used the deprecated sysctl system call with 1.49.
Linux version 2.6.24 ([EMAIL PROTECTED]) (gcc version 4.1.3 20070724
(prerelease) (SUSE Linux)) #23 SMP Wed Feb 6 10:03:53 MSK 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bffce0e5 (usable)
BIOS-e820: 00000000bffce0e5 - 00000000bfff0000 (reserved)
BIOS-e820: 00000000bfff0000 - 00000000bffff000 (ACPI data)
BIOS-e820: 00000000bffff000 - 00000000c0000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec86000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
Warning only 4GB will be used.
Use a HIGHMEM64G enabled kernel.
3200MB HIGHMEM available.
896MB LOWMEM available.
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
found SMP MP-table at [c00ff780] 000ff780
Entering add_active_range(0, 0, 1048576) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 1048576
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 1048576
On node 0 totalpages: 1048576
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 6400 pages used for memmap
HighMem zone: 812800 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
DMI 2.3 present.
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: INTEL Product ID: SE7320EP20 APIC at: 0xFEE00000
Processor #0 15:4 APIC version 20
Processor #6 15:4 APIC version 20
I/O APIC #7 Version 32 at 0xFEC00000.
I/O APIC #8 Version 32 at 0xFEC10000.
Enabling APIC mode: Flat. Using 2 I/O APICs
Processors: 2
Allocating PCI resources starting at c4000000 (gap: c0000000:3ec00000)
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1040384
Kernel command line: ro root=08:02 ignore_loglevel
debug: ignoring loglevel setting.
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
mapped IOAPIC to ffff9000 (fec10000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 3192.343 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 3108104k/4194304k available (1357k kernel code, 36260k reserved, 594k
data, 168k init, 2228024k highmem)
virtual kernel memory layout:
fixmap : 0xfffa0000 - 0xfffff000 ( 380 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc05f0000 - 0xc061a000 ( 168 kB)
.data : 0xc0553754 - 0xc05e8088 ( 594 kB)
.text : 0xc0400000 - 0xc0553754 (1357 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 6387.05 BogoMIPS (lpj=3193528)
Mount-cache hash table entries: 512
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Hyper-Threading is disabled
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
CPU0: Thermal monitoring enabled
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 15k freed
CPU0: Intel(R) Xeon(TM) CPU 3.20GHz stepping 01
Booting processor 1/6 ip 2000
Initializing CPU#1
Calibrating delay using timer specific routine.. 6383.16 BogoMIPS (lpj=3191582)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Hyper-Threading is disabled
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
CPU1: Thermal monitoring enabled
CPU1: Intel(R) Xeon(TM) CPU 3.20GHz stepping 01
Total of 2 processors activated (12770.22 BogoMIPS).
ExtINT not setup in hardware but reported by MP table
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
net_namespace: 164 bytes
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=4
PCI: Using configuration type 1
Setting up standard PCI resources
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0480-04bf claimed by ICH4 GPIO
PCI: Transparent bridge - 0000:00:1e.0
PCI: Discovered primary peer bus ff [IRQ]
PCI: Using IRQ router PIIX/ICH [8086/25a1] at 0000:00:1f.0
PCI->APIC IRQ transform: 0000:00:02.0[A] -> IRQ 16
PCI->APIC IRQ transform: 0000:00:03.0[A] -> IRQ 16
PCI->APIC IRQ transform: 0000:00:1d.0[A] -> IRQ 16
PCI->APIC IRQ transform: 0000:00:1d.1[B] -> IRQ 19
PCI->APIC IRQ transform: 0000:00:1d.7[D] -> IRQ 23
PCI->APIC IRQ transform: 0000:00:1f.1[A] -> IRQ 18
PCI->APIC IRQ transform: 0000:00:1f.2[A] -> IRQ 18
PCI->APIC IRQ transform: 0000:00:1f.3[B] -> IRQ 17
PCI->APIC IRQ transform: 0000:02:00.0[A] -> IRQ 16
PCI->APIC IRQ transform: 0000:04:02.0[A] -> IRQ 17
PCI->APIC IRQ transform: 0000:04:03.0[A] -> IRQ 16
PCI: Bridge: 0000:00:02.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:03.0
IO window: d000-dfff
Time: tsc clocksource has been installed.
MEM window: dee00000-deefffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: e000-efff
MEM window: def00000-dfffffff
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:02.0 to 64
PCI: Setting latency timer of device 0000:00:03.0 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
highmem bounce pool size: 64 pages
io scheduler noop registered
io scheduler anticipatory registered (default)
Boot video device is 0000:04:02.0
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
loop: module loaded
Driver 'sd' needs updating - please use bus_type methods
ata_piix 0000:00:1f.1: version 2.12
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
ata1.00: ATAPI: TEAC DV-516G, F4S6, max UDMA/33
ata1.00: configured for UDMA/33
scsi 0:0:0:0: CD-ROM TEAC DV-516G F4S6 PQ: 0 ANSI: 5
ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc000 irq 18
ata4: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xc008 irq 18
ata4.00: ATA-7: ST3200826AS, 3.03, max UDMA/133
ata4.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA ST3200826AS 3.03 PQ: 0 ANSI: 5
sd 3:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sd 3:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 >
sd 3:0:0:0: [sda] Attached SCSI disk
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 168k freed
warning: process `kmodule' used the deprecated sysctl system call with 1.23.
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
Copyright (c) 1999-2006 Intel Corporation.
e1000: 0000:04:03.0: e1000_probe: (PCI:33MHz:32-bit) 00:0e:0c:3b:d8:8b
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
PCI: Setting latency timer of device 0000:02:00.0 to 64
sky2 0000:02:00.0: v1.21 addr 0xdeefc000 irq 16 Yukon-EC (0xb6) rev 2
sky2 eth1: addr 00:0e:0c:3b:d8:8a
intel_rng: FWH not detected
EXT3 FS on sda2, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
warning: process `kudzu' used the deprecated sysctl system call with 1.23.
warning: process `kudzu' used the deprecated sysctl system call with 1.49.
warning: process `kudzu' used the deprecated sysctl system call with 1.49.
e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control:
RX
