From: Peter Tiedemann <[EMAIL PROTECTED]>
establish base stuff for the replaced ctc driver, i.e. Kconfig and
Makefile adaptions
arch/s390/defconfig
drivers/s390/net/Kconfig
drivers/s390/net/Makefile
Signed-off-by: Peter Tiedemann <[EMAIL PROTECTED]>
Signed-off-by: Ursula Braun <[EMAIL PROTECTED]>
---
drivers/s390/net/Kconfig | 12 +++++++-----
drivers/s390/net/Makefile | 5 ++---
2 files changed, 9 insertions(+), 8 deletions(-)
Index: linux-2.6-uschi/drivers/s390/net/Makefile
===================================================================
--- linux-2.6-uschi.orig/drivers/s390/net/Makefile
+++ linux-2.6-uschi/drivers/s390/net/Makefile
@@ -2,11 +2,10 @@
# S/390 network devices
#
-ctc-objs := ctcmain.o ctcdbug.o
-
+ctcm-objs := ctcm_main.o ctcm_fsms.o ctcm_mpc.o ctcm_sysfs.o ctcm_dbug.o
+obj-$(CONFIG_CTCM) += ctcm.o fsm.o cu3088.o
obj-$(CONFIG_NETIUCV) += netiucv.o fsm.o
obj-$(CONFIG_SMSGIUCV) += smsgiucv.o
-obj-$(CONFIG_CTC) += ctc.o fsm.o cu3088.o
obj-$(CONFIG_LCS) += lcs.o cu3088.o
obj-$(CONFIG_CLAW) += claw.o cu3088.o
qeth-y := qeth_main.o qeth_mpc.o qeth_sys.o qeth_eddp.o
Index: linux-2.6-uschi/drivers/s390/net/Kconfig
===================================================================
--- linux-2.6-uschi.orig/drivers/s390/net/Kconfig
+++ linux-2.6-uschi/drivers/s390/net/Kconfig
@@ -11,15 +11,17 @@ config LCS
To compile as a module, choose M. The module name is lcs.ko.
If you do not know what it is, it's safe to choose Y.
-config CTC
- tristate "CTC device support"
+config CTCM
+ tristate "CTC and MPC SNA device support"
depends on CCW && NETDEVICES
help
Select this option if you want to use channel-to-channel
point-to-point networking on IBM System z.
This device driver supports real CTC coupling using ESCON.
It also supports virtual CTCs when running under VM.
- To compile as a module, choose M. The module name is ctc.ko.
+ This driver also supports channel-to-channel MPC SNA devices.
+ MPC is an SNA protocol device used by Communication Server for Linux.
+ To compile as a module, choose M. The module name is ctcm.ko.
To compile into the kernel, choose Y.
If you do not need any channel-to-channel connection, choose N.
@@ -84,7 +86,7 @@ config QETH_VLAN
802.1q VLAN support in the qeth device driver.
config CCWGROUP
- tristate
- default (LCS || CTC || QETH)
+ tristate
+ default (LCS || CTCM || QETH)
endmenu
--
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
