Benjamin Herrenschmidt wrote:
On Tue, 2007-10-23 at 20:57 -0500, Valentine Barshak wrote:+static int m88e1111_init(struct mii_phy *phy) +{ + printk("%s: Marvell 88E1111 Ethernet\n", __FUNCTION__); + phy_write(phy, 0x14, 0x0ce3); + phy_write(phy, 0x18, 0x4101); + phy_write(phy, 0x09, 0x0e00); + phy_write(phy, 0x04, 0x01e1); + phy_write(phy, 0x00, 0x9140); + phy_write(phy, 0x00, 0x1140); + + return 0; +}Care to put a few comments on why the above is necessary and what it does ?
I think this set's up Marvell ext control (0x14) and led control (0x18) registers with some default values, Also sets some bits in the CTRL1000, ADVERTISE and basic mode control registers and resets the phy for the changes to take effect. Unfortunately, I don't have a detailed 88E1111 description and can't tell anything about it. Looks like the code was originally ported from u-boot and is needed to init the phy :)
Stefan, do you have any info on this? Thanks, Valentine.
Thanks ! Ben.+static struct mii_phy_ops m88e1111_phy_ops = { + .init = m88e1111_init, + .setup_aneg = genmii_setup_aneg, + .setup_forced = genmii_setup_forced, + .poll_link = genmii_poll_link, + .read_link = genmii_read_link +}; + +static struct mii_phy_def m88e1111_phy_def = { + + .phy_id = 0x01410CC0, + .phy_id_mask = 0x0ffffff0, + .name = "Marvell 88E1111 Ethernet", + .ops = &m88e1111_phy_ops, +}; + static struct mii_phy_def *mii_phy_table[] = { &cis8201_phy_def, + &bcm5248_phy_def, + &m88e1111_phy_def, &genmii_phy_def, NULL };
- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
