[PATCH 3/6] sky2: fix power settings on Yukon XL

[Stephen Hemminger]

Make sure PCI register for PHY power gets set correctly.

Signed-off-by: Stephen Hemminger <[EMAIL PROTECTED]>


--- a/drivers/net/sky2.c        2007-10-11 18:12:56.000000000 -0700
+++ b/drivers/net/sky2.c        2007-10-11 18:13:00.000000000 -0700
@@ -606,20 +606,19 @@ static void sky2_phy_power(struct sky2_h
 {
        struct pci_dev *pdev = hw->pdev;
        u32 reg1;
-       static const u32 phy_power[]
-               = { PCI_Y2_PHY1_POWD, PCI_Y2_PHY2_POWD };
-
-       /* looks like this XL is back asswards .. */
-       if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
-               onoff = !onoff;
+       static const u32 phy_power[] = { PCI_Y2_PHY1_POWD, PCI_Y2_PHY2_POWD };
+       static const u32 coma_mode[] = { PCI_Y2_PHY1_COMA, PCI_Y2_PHY2_COMA };
 
        pci_read_config_dword(pdev, PCI_DEV_REG1, &reg1);
+       /* Turn on/off phy power saving */
        if (onoff)
-               /* Turn off phy power saving */
                reg1 &= ~phy_power[port];
        else
                reg1 |= phy_power[port];
 
+       if (onoff && hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
+               reg1 |= coma_mode[port];
+
        pci_write_config_dword(pdev, PCI_DEV_REG1, reg1);
        pci_read_config_dword(pdev, PCI_DEV_REG1, &reg1);
 

-- 
Stephen Hemminger <[EMAIL PROTECTED]>

-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html