Minor formatting nits reported by checkpatch.pl script:
WARNING: braces {} are not necessary for single statement blocks
#506: FILE: drivers/net/bnx2x.c:451:
+ if (REG_RD(bp, GRCBASE_HC, addr) != val) {
+ BNX2X_ERR("BUG! proper val not read from IGU!\n");
+ }
WARNING: braces {} are not necessary for single statement blocks
#709: FILE: drivers/net/bnx2x.c:654:
+ if (unlikely(bp->panic)) {
+ return;
+ }
WARNING: braces {} are not necessary for single statement blocks
#736: FILE: drivers/net/bnx2x.c:681:
+ if (done == work) {
+ break;
+ }
WARNING: braces {} are not necessary for single statement blocks
#754: FILE: drivers/net/bnx2x.c:699:
+ if ((netif_queue_stopped(bp->dev)) &&
+ (bnx2x_tx_avail(fp) >= MAX_SKB_FRAGS + 3)) {
+ netif_wake_queue(bp->dev);
+ }
WARNING: no space between function name and open parenthesis '('
#777: FILE: drivers/net/bnx2x.c:722:
+ case (RAMROD_CMD_ID_ETH_PORT_SETUP | BNX2X_STATE_OPENING_WAIT4_PORT):
WARNING: no space between function name and open parenthesis '('
#782: FILE: drivers/net/bnx2x.c:727:
+ case (RAMROD_CMD_ID_ETH_HALT | BNX2X_STATE_CLOSING_WAIT4_HALT):
WARNING: no space between function name and open parenthesis '('
#788: FILE: drivers/net/bnx2x.c:733:
+ case (RAMROD_CMD_ID_ETH_PORT_DEL | BNX2X_STATE_CLOSING_WAIT4_DELETE):
WARNING: no space between function name and open parenthesis '('
#793: FILE: drivers/net/bnx2x.c:738:
+ case (RAMROD_CMD_ID_ETH_SET_MAC | BNX2X_STATE_OPEN):
WARNING: braces {} are not necessary for single statement blocks
#812: FILE: drivers/net/bnx2x.c:757:
+ if (unlikely(skb == NULL)) {
+ return -ENOMEM;
+ }
WARNING: braces {} are not necessary for single statement blocks
#873: FILE: drivers/net/bnx2x.c:818:
+ if (unlikely(bp->panic)) {
+ return 0;
+ }
WARNING: braces {} are not necessary for single statement blocks
#879: FILE: drivers/net/bnx2x.c:824:
+ if ((hw_comp_cons & MAX_RX_DESC_CNT) == MAX_RX_DESC_CNT) {
+ hw_comp_cons++;
+ }
WARNING: braces {} are not necessary for single statement blocks
#1018: FILE: drivers/net/bnx2x.c:963:
+ if ((cqe->fast_path_cqe.pars_flags.flags
+ & PARSING_FLAGS_NUMBER_OF_NESTED_VLANS)
+ && (bp->vlgrp != 0)) {
+ vlan_hwaccel_receive_skb(skb, bp->vlgrp,
+ cqe->fast_path_cqe.vlan_tag);
+ } else
WARNING: braces {} are not necessary for single statement blocks
#1069: FILE: drivers/net/bnx2x.c:1014:
+ if (unlikely(bp->panic)) {
+ return IRQ_HANDLED;
+ }
WARNING: braces {} are not necessary for single statement blocks
#1096: FILE: drivers/net/bnx2x.c:1041:
+ if (unlikely(bp->panic)) {
+ return IRQ_HANDLED;
+ }
WARNING: braces {} are not necessary for single statement blocks
#1118: FILE: drivers/net/bnx2x.c:1063:
+ if (!status) {
+ return IRQ_HANDLED;
+ }
WARNING: braces {} are not necessary for single statement blocks
#1127: FILE: drivers/net/bnx2x.c:1072:
+ if (!status) {
+ return IRQ_HANDLED;
+ }
WARNING: braces {} are not necessary for single statement blocks
#1489: FILE: drivers/net/bnx2x.c:1434:
+ if (rd_val == val) {
+ return 0;
+ }
WARNING: braces {} are not necessary for single statement blocks
#1549: FILE: drivers/net/bnx2x.c:1494:
+ if (bp->req_flow_ctrl == FLOW_CTRL_AUTO) {
+ bp->flow_ctrl = FLOW_CTRL_BOTH;
+ }
WARNING: braces {} are not necessary for single statement blocks
#1661: FILE: drivers/net/bnx2x.c:1606:
+ if (gp_status & MDIO_AN_CL73_OR_37_COMPLETE) {
+ bp->link_status |=
+ LINK_STATUS_AUTO_NEGOTIATE_COMPLETE;
+ }
WARNING: braces {} are not necessary for single statement blocks
#1665: FILE: drivers/net/bnx2x.c:1610:
+ if (bp->autoneg & AUTONEG_PARALLEL) {
+ bp->link_status |=
+ LINK_STATUS_PARALLEL_DETECTION_USED;
+ }
WARNING: braces {} are not necessary for single statement blocks
#1671: FILE: drivers/net/bnx2x.c:1616:
+ if (bp->flow_ctrl & FLOW_CTRL_TX) {
+ bp->link_status |= LINK_STATUS_TX_FLOW_CONTROL_ENABLED;
+ }
WARNING: braces {} are not necessary for single statement blocks
#1674: FILE: drivers/net/bnx2x.c:1619:
+ if (bp->flow_ctrl & FLOW_CTRL_RX) {
+ bp->link_status |= LINK_STATUS_RX_FLOW_CONTROL_ENABLED;
+ }
WARNING: braces {} are not necessary for single statement blocks
#1871: FILE: drivers/net/bnx2x.c:1816:
+ if (bp->flow_ctrl & FLOW_CTRL_TX) {
+ val |= 0x800000;
+ }
WARNING: braces {} are not necessary for single statement blocks
#1898: FILE: drivers/net/bnx2x.c:1843:
+ if (bp->flow_ctrl & FLOW_CTRL_RX) {
+ val |= 0x20;
+ }
WARNING: braces {} are not necessary for single statement blocks
#1953: FILE: drivers/net/bnx2x.c:1898:
+ if (bp->flow_ctrl & FLOW_CTRL_TX) {
+ val = 1;
+ }
WARNING: braces {} are not necessary for single statement blocks
#2053: FILE: drivers/net/bnx2x.c:1998:
+ if (bp->flow_ctrl & FLOW_CTRL_RX) {
+ bnx2x_bits_en(bp, emac_base, EMAC_REG_EMAC_RX_MODE,
+ EMAC_RX_MODE_FLOW_EN);
+ }
WARNING: braces {} are not necessary for single statement blocks
#2060: FILE: drivers/net/bnx2x.c:2005:
+ if (bp->flow_ctrl & FLOW_CTRL_TX) {
+ bnx2x_bits_en(bp, emac_base, EMAC_REG_EMAC_TX_MODE,
+ EMAC_TX_MODE_EXT_PAUSE_EN);
+ }
WARNING: braces {} are not necessary for single statement blocks
#2100: FILE: drivers/net/bnx2x.c:2045:
+ if (bp->flow_ctrl & FLOW_CTRL_TX) {
+ val = 1;
+ }
WARNING: braces {} are not necessary for single statement blocks
#2153: FILE: drivers/net/bnx2x.c:2098:
+ if (bp->duplex == DUPLEX_HALF) {
+ mode |= EMAC_MODE_HALF_DUPLEX;
+ }
WARNING: braces {} are not necessary for single statement blocks
#2218: FILE: drivers/net/bnx2x.c:2163:
+ if (bp->flow_ctrl & FLOW_CTRL_RX) {
+ pause = 1;
+ }
WARNING: braces {} are not necessary for single statement blocks
#2273: FILE: drivers/net/bnx2x.c:2218:
+ if (!nomcp) {
+ SHMEM_WR(bp, drv_fw_mb[bp->port].link_status,
+ bp->link_status);
+ }
ERROR: no space before that close parenthesis ')'
#2380: FILE: drivers/net/bnx2x.c:2325:
+ );
WARNING: braces {} are not necessary for single statement blocks
#2410: FILE: drivers/net/bnx2x.c:2355:
+ if (!(bp->phy_flags & PHY_SGMII_FLAG)) {
+ bnx2x_set_sgmii_tx_driver(bp);
+ }/* Not SGMII */
WARNING: braces {} are not necessary for single statement blocks
#2645: FILE: drivers/net/bnx2x.c:2590:
+ if (bp->req_duplex == DUPLEX_FULL) {
+ reg_val |= MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX;
+ }
WARNING: braces {} are not necessary for single statement blocks
#2659: FILE: drivers/net/bnx2x.c:2604:
+ if (bp->req_line_speed == SPEED_10000) {
+ reg_val |=
+ MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_CX4;
+ }
WARNING: braces {} are not necessary for single statement blocks
#2675: FILE: drivers/net/bnx2x.c:2620:
+ if (bp->advertising & ADVERTISED_2500baseT_Full) {
+ val |= MDIO_OVER_1G_UP1_2_5G;
+ }
WARNING: braces {} are not necessary for single statement blocks
#2678: FILE: drivers/net/bnx2x.c:2623:
+ if (bp->advertising & ADVERTISED_10000baseT_Full) {
+ val |= MDIO_OVER_1G_UP1_10G;
+ }
WARNING: braces {} are not necessary for single statement blocks
#2789: FILE: drivers/net/bnx2x.c:2734:
+ if (bp->req_duplex == DUPLEX_FULL) {
+ mii_control |=
+ MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX;
+ }
WARNING: braces {} are not necessary for single statement blocks
#2991: FILE: drivers/net/bnx2x.c:2936:
+ if (bp->phy_flags & PHY_XGXS_FLAG) {
+ bnx2x_set_master_ln(bp);
+ }
WARNING: braces {} are not necessary for single statement blocks
#3007: FILE: drivers/net/bnx2x.c:2952:
+ if (bp->req_autoneg & AUTONEG_SPEED) {
+ bnx2x_set_parallel_detection(bp);
+ }
WARNING: no space between function name and open parenthesis '('
#3159: FILE: drivers/net/bnx2x.c:3104:
+static void bnx2x_set_xgxs_loopback (struct bnx2x *bp, int is_10g)
WARNING: braces {} are not necessary for single statement blocks
#3226: FILE: drivers/net/bnx2x.c:3171:
+ if (unlikely(bp->panic)) {
+ return -EIO;
+ }
ERROR: no space after that open parenthesis '('
#3273: FILE: drivers/net/bnx2x.c:3218:
+static int bnx2x_lock_alr( struct bnx2x *bp)
WARNING: braces {} are not necessary for single statement blocks
#3284: FILE: drivers/net/bnx2x.c:3229:
+ if (val & (1L << 31)) {
+ break;
+ }
ERROR: trailing whitespace
#3314: FILE: drivers/net/bnx2x.c:3259:
+^I$
WARNING: braces {} are not necessary for single statement blocks
#3381: FILE: drivers/net/bnx2x.c:3326:
+ if (asserted & ATTN_SW_TIMER_4_FUNC0) {
+ DP(NETIF_MSG_HW, "ATTN_SW_TIMER_4_FUNC!\n");
+ }
WARNING: braces {} are not necessary for single statement blocks
#3384: FILE: drivers/net/bnx2x.c:3329:
+ if (asserted & GPIO_2_FUNC0) {
+ DP(NETIF_MSG_HW, "GPIO_2_FUNC!\n");
+ }
WARNING: braces {} are not necessary for single statement blocks
#3387: FILE: drivers/net/bnx2x.c:3332:
+ if (asserted & GPIO_3_FUNC0) {
+ DP(NETIF_MSG_HW, "GPIO_3_FUNC!\n");
+ }
WARNING: braces {} are not necessary for single statement blocks
#3390: FILE: drivers/net/bnx2x.c:3335:
+ if (asserted & GPIO_4_FUNC0) {
+ DP(NETIF_MSG_HW, "GPIO_4_FUNC!\n");
+ }
WARNING: braces {} are not necessary for single statement blocks
#3399: FILE: drivers/net/bnx2x.c:3344:
+ if (asserted & ATTN_GENERAL_ATTN_2) {
+ DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_2!\n");
+ }
WARNING: braces {} are not necessary for single statement blocks
#3402: FILE: drivers/net/bnx2x.c:3347:
+ if (asserted & ATTN_GENERAL_ATTN_3) {
+ DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_3!\n");
+ }
WARNING: braces {} are not necessary for single statement blocks
#3412: FILE: drivers/net/bnx2x.c:3357:
+ if (asserted & (ATTN_NIG_FOR_FUNC0 | ATTN_NIG_FOR_FUNC1)) {
+ REG_WR(bp, GRCBASE_NIG, nig_mask_addr, bp->nig_mask);
+ }
WARNING: braces {} are not necessary for single statement blocks
#3482: FILE: drivers/net/bnx2x.c:3427:
+ if (val & 0x2) {
+ BNX2X_ERR("FATAL error from DORQ\n");
+ }
WARNING: braces {} are not necessary for single statement blocks
#3494: FILE: drivers/net/bnx2x.c:3439:
+ if (val & 0x18000) {
+ BNX2X_ERR("FATAL error from PXP\n");
+ }
WARNING: braces {} are not necessary for single statement blocks
#3554: FILE: drivers/net/bnx2x.c:3499:
+ if (~(attn_bits ^ attn_ack) & (attn_bits ^ attn_state)) {
+ BNX2X_ERR("bad attention state\n");
+ }
WARNING: braces {} are not necessary for single statement blocks
#3559: FILE: drivers/net/bnx2x.c:3504:
+ if (asserted) {
+ bnx2x_attn_int_asserted(bp, asserted);
+ }
WARNING: braces {} are not necessary for single statement blocks
#3563: FILE: drivers/net/bnx2x.c:3508:
+ if (deasserted) {
+ bnx2x_attn_int_deasserted(bp, deasserted);
+ }
WARNING: braces {} are not necessary for single statement blocks
#3580: FILE: drivers/net/bnx2x.c:3525:
+ if (status == 0) {
+ BNX2X_ERR("spurious slowpath interrupt!\n");
+ }
WARNING: braces {} are not necessary for single statement blocks
#3592: FILE: drivers/net/bnx2x.c:3537:
+ if (status & 0x2) {
+ bp->stat_pending = 0;
+ }
WARNING: braces {} are not necessary for single statement blocks
#3623: FILE: drivers/net/bnx2x.c:3568:
+ if (unlikely(bp->panic)) {
+ return IRQ_HANDLED;
+ }
WARNING: braces {} are not necessary for single statement blocks
#3926: FILE: drivers/net/bnx2x.c:3871:
+ while (bp->stats_state != STATS_STATE_DISABLE) {
+ msleep(100);
+ }
WARNING: braces {} are not necessary for single statement blocks
#4234: FILE: drivers/net/bnx2x.c:4179:
+ if (bp->msglevel & NETIF_MSG_TIMER) {
+ printk(KERN_DEBUG "%s:\n"
+ KERN_DEBUG " tx avail (%4x) tx hc idx (%x)"
+ " tx pkt (%lx)\n"
+ KERN_DEBUG " rx usage (%4x) rx hc idx (%x)"
+ " rx pkt (%lx)\n"
+ KERN_DEBUG " %s (Xoff events %u) brb drops %u\n"
+ KERN_DEBUG " tstats: no_buff_discard %u"
+ " errors_discard %u mac_filter_discard %u"
+ " xxovrflow_discard %u ttl0_discard %u\n",
+ bp->dev->name, bnx2x_tx_avail(bp->fp),
+ *bp->fp->tx_cons_sb, bp->dev->stats.tx_packets,
+ (u16)(*bp->fp->rx_cons_sb - bp->fp->rx_comp_cons),
+ *bp->fp->rx_cons_sb, bp->dev->stats.rx_packets,
+ netif_queue_stopped(bp->dev)? "Xoff" : "Xon",
+ bp->slowpath->eth_stats.driver_xoff,
+ bp->slowpath->eth_stats.brb_discard,
+ bp->slowpath->eth_stats.no_buff_discard,
+ bp->slowpath->eth_stats.errors_discard,
+ bp->slowpath->eth_stats.mac_filter_discard,
+ bp->slowpath->eth_stats.xxoverflow_discard,
+ bp->slowpath->eth_stats.ttl0_discard);
+ }
WARNING: braces {} are not necessary for single statement blocks
#4264: FILE: drivers/net/bnx2x.c:4209:
+ if (unlikely(bp->panic)) {
+ return;
+ }
WARNING: braces {} are not necessary for single statement blocks
#4269: FILE: drivers/net/bnx2x.c:4214:
+ if (bp->fw_mb) {
+ REG_WR32(bp, GRCBASE_DMAE,
+ (bp->port ? DMAE_REGISTERS_GO_C13 :
+ DMAE_REGISTERS_GO_C12), 1);
+ }
WARNING: braces {} are not necessary for single statement blocks
#4332: FILE: drivers/net/bnx2x.c:4277:
+ if ((drv_pulse != mcp_pulse) &&
+ (drv_pulse != ((mcp_pulse + 1) & MCP_PULSE_SEQ_MASK))) {
+ BNX2X_ERR("drv_pulse (0x%x) != mcp_pulse (0x%x)\n",
+ drv_pulse, mcp_pulse);
+ }
WARNING: braces {} are not necessary for single statement blocks
#4374: FILE: drivers/net/bnx2x.c:4319:
+ for (index = 0; index < HC_USTORM_SB_NUM_INDICES; index++) {
+ REG_WR16(bp, BAR_USTRORM_INTMEM,
+ USTORM_SB_HC_DISABLE_OFFSET(port, id, index), 0x1);
+ }
WARNING: braces {} are not necessary for single statement blocks
#4390: FILE: drivers/net/bnx2x.c:4335:
+ for (index = 0; index < HC_CSTORM_SB_NUM_INDICES; index++) {
+ REG_WR16(bp, BAR_CSTRORM_INTMEM,
+ CSTORM_SB_HC_DISABLE_OFFSET(port, id, index), 0x1);
+ }
WARNING: braces {} are not necessary for single statement blocks
#4458: FILE: drivers/net/bnx2x.c:4403:
+ for (index = 0; index < HC_USTORM_DEF_SB_NUM_INDICES; index++) {
+ REG_WR16(bp, BAR_USTRORM_INTMEM,
+ USTORM_DEF_SB_HC_DISABLE_OFFSET(port, index), 0x1);
+ }
WARNING: braces {} are not necessary for single statement blocks
#4476: FILE: drivers/net/bnx2x.c:4421:
+ for (index = 0; index < HC_CSTORM_DEF_SB_NUM_INDICES; index++) {
+ REG_WR16(bp, BAR_CSTRORM_INTMEM,
+ CSTORM_DEF_SB_HC_DISABLE_OFFSET(port, index), 0x1);
+ }
WARNING: braces {} are not necessary for single statement blocks
#4494: FILE: drivers/net/bnx2x.c:4439:
+ for (index = 0; index < HC_TSTORM_DEF_SB_NUM_INDICES; index++) {
+ REG_WR16(bp, BAR_TSTRORM_INTMEM,
+ TSTORM_DEF_SB_HC_DISABLE_OFFSET(port, index), 0x1);
+ }
WARNING: braces {} are not necessary for single statement blocks
#4512: FILE: drivers/net/bnx2x.c:4457:
+ for (index = 0; index < HC_XSTORM_DEF_SB_NUM_INDICES; index++) {
+ REG_WR16(bp, BAR_XSTRORM_INTMEM,
+ XSTORM_DEF_SB_HC_DISABLE_OFFSET(port, index), 0x1);
+ }
WARNING: multiple assignments should be avoided
#4566: FILE: drivers/net/bnx2x.c:4511:
+ fp->last_alloc = fp->next_free = 0;
WARNING: multiple assignments should be avoided
#4594: FILE: drivers/net/bnx2x.c:4539:
+ fp->rx_comp_cons = ring_prod = 0;
WARNING: multiple assignments should be avoided
#4606: FILE: drivers/net/bnx2x.c:4551:
+ fp->rx_bd_prod = fp->rx_comp_prod = ring_prod;
WARNING: multiple assignments should be avoided
#4607: FILE: drivers/net/bnx2x.c:4552:
+ fp->rx_pkt = fp->rx_calls = 0;
WARNING: braces {} are not necessary for single statement blocks
#5072: FILE: drivers/net/bnx2x.c:5017:
+ if (val == 0x10) {
+ break;
+ }
WARNING: braces {} are not necessary for single statement blocks
#5088: FILE: drivers/net/bnx2x.c:5033:
+ if (val == 0x1) {
+ break;
+ }
WARNING: braces {} are not necessary for single statement blocks
#5119: FILE: drivers/net/bnx2x.c:5064:
+ for (i = 0; i < 10; i++) {
+ bnx2x_lb_pckt(bp);
+ }
WARNING: braces {} are not necessary for single statement blocks
#5135: FILE: drivers/net/bnx2x.c:5080:
+ if (val == 0xb0) {
+ break;
+ }
WARNING: braces {} are not necessary for single statement blocks
#5149: FILE: drivers/net/bnx2x.c:5094:
+ if (val != 0x2) {
+ BNX2X_ERR("PRS timeout val = 0x%x\n", val);
+ }
WARNING: braces {} are not necessary for single statement blocks
#5161: FILE: drivers/net/bnx2x.c:5106:
+ if (val != 0x3) {
+ BNX2X_ERR("PRS timeout val = 0x%x\n", val);
+ }
WARNING: braces {} are not necessary for single statement blocks
#5165: FILE: drivers/net/bnx2x.c:5110:
+ for (i = 0; i < 11; i++) {
+ REG_RD(bp, GRCBASE_NIG, NIG_REGISTERS_INGRESS_EOP_LB_FIFO);
+ }
WARNING: braces {} are not necessary for single statement blocks
#5394: FILE: drivers/net/bnx2x.c:5339:
+ if (sizeof(union cdu_context) != 1024) {
+ printk(KERN_ALERT PFX "please adjust the size of"
+ " cdu_context(%ld)\n",
+ (long)sizeof(union cdu_context));
+ }
WARNING: braces {} are not necessary for single statement blocks
#5415: FILE: drivers/net/bnx2x.c:5360:
+ if (CHIP_REV_IS_SLOW(bp)) {
+ msleep(200);
+ }
WARNING: braces {} are not necessary for single statement blocks
#5713: FILE: drivers/net/bnx2x.c:5658:
+ for (word = 0; word < 8; word++) {
+ data[word] = htonl(REG_RD(bp, GRCBASE_MCP,
+ MCP_REG_MCPR_SCRATCH +
+ offset + 4*word));
+ }
WARNING: braces {} are not necessary for single statement blocks
#5741: FILE: drivers/net/bnx2x.c:5686:
+ if (CHIP_REV_IS_SLOW(bp)) {
+ msleep(900);
+ }
WARNING: braces {} are not necessary for single statement blocks
#5909: FILE: drivers/net/bnx2x.c:5854:
+ for (i = 0; i < 16*1024; i += 64) {
+ *(u64 *)((char *)bp->t2 + i + 56) = bp->t2_mapping + i + 64;
+ }
WARNING: braces {} are not necessary for single statement blocks
#6044: FILE: drivers/net/bnx2x.c:5989:
+ if (rc) {
+ return -1;
+ }
WARNING: braces {} are not necessary for single statement blocks
#6056: FILE: drivers/net/bnx2x.c:6001:
+ if (rc) {
+ goto out_irq;
+ }
WARNING: braces {} are not necessary for single statement blocks
#6066: FILE: drivers/net/bnx2x.c:6011:
+ if (rc) {
+ return -1;
+ }
WARNING: braces {} are not necessary for single statement blocks
#6167: FILE: drivers/net/bnx2x.c:6112:
+ if (i++ == 5000) {
+ return -EBUSY;
+ }
WARNING: braces {} are not necessary for single statement blocks
#6213: FILE: drivers/net/bnx2x.c:6158:
+ if (rc) {
+ goto out_error;
+ }
WARNING: braces {} are not necessary for single statement blocks
#6229: FILE: drivers/net/bnx2x.c:6174:
+ if (rc) {
+ goto out_skbs;
+ }
WARNING: braces {} are not necessary for single statement blocks
#6237: FILE: drivers/net/bnx2x.c:6182:
+ if (!rc) {
+ goto int_disable;
+ }
WARNING: braces {} are not necessary for single statement blocks
#6258: FILE: drivers/net/bnx2x.c:6203:
+ if (rc) {
+ goto stop_netif;
+ }
WARNING: braces {} are not necessary for single statement blocks
#6271: FILE: drivers/net/bnx2x.c:6216:
+ if (bp->flags & USING_MSIX_FLAG) {
+ printk(KERN_INFO PFX "%s: using MSI-X\n",
+ bp->dev->name);
+ }
WARNING: braces {} are not necessary for single statement blocks
#6366: FILE: drivers/net/bnx2x.c:6311:
+ while (bp->stat_pending && (bp->spq_left != MAX_SPQ_PENDING)) {
+ msleep(1);
+ }
WARNING: braces {} are not necessary for single statement blocks
#6404: FILE: drivers/net/bnx2x.c:6349:
+ if (rc) {
+ goto error;
+ }
WARNING: braces {} are not necessary for single statement blocks
#6439: FILE: drivers/net/bnx2x.c:6384:
+ if (!nomcp) {
+ bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE);
+ }
WARNING: braces {} are not necessary for single statement blocks
#6580: FILE: drivers/net/bnx2x.c:6525:
+ if (!(bp->speed_cap_mask &
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF)) {
+ bp->supported &= ~SUPPORTED_10baseT_Half;
+ }
WARNING: braces {} are not necessary for single statement blocks
#6584: FILE: drivers/net/bnx2x.c:6529:
+ if (!(bp->speed_cap_mask &
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL)) {
+ bp->supported &= ~SUPPORTED_10baseT_Full;
+ }
WARNING: braces {} are not necessary for single statement blocks
#6588: FILE: drivers/net/bnx2x.c:6533:
+ if (!(bp->speed_cap_mask &
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF)) {
+ bp->supported &= ~SUPPORTED_100baseT_Half;
+ }
WARNING: braces {} are not necessary for single statement blocks
#6592: FILE: drivers/net/bnx2x.c:6537:
+ if (!(bp->speed_cap_mask &
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL)) {
+ bp->supported &= ~SUPPORTED_100baseT_Full;
+ }
WARNING: braces {} are not necessary for single statement blocks
#6596: FILE: drivers/net/bnx2x.c:6541:
+ if (!(bp->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) {
+ bp->supported &= ~(SUPPORTED_1000baseT_Half |
+ SUPPORTED_1000baseT_Full);
+ }
WARNING: braces {} are not necessary for single statement blocks
#6600: FILE: drivers/net/bnx2x.c:6545:
+ if (!(bp->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G)) {
+ bp->supported &= ~SUPPORTED_2500baseT_Full;
+ }
WARNING: braces {} are not necessary for single statement blocks
#6603: FILE: drivers/net/bnx2x.c:6548:
+ if (!(bp->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) {
+ bp->supported &= ~SUPPORTED_10000baseT_Full;
+ }
WARNING: braces {} are not necessary for single statement blocks
#6818: FILE: drivers/net/bnx2x.c:6763:
+ if ((val & (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB))
+ != (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB)) {
+ BNX2X_ERR("MCP validity signature bad\n");
+ }
WARNING: multiple assignments should be avoided
#6880: FILE: drivers/net/bnx2x.c:6825:
+ bp->bc_ver = val = ((SHMEM_RD(bp, dev_info.bc_rev)) >> 8);
WARNING: braces {} are not necessary for single statement blocks
#6973: FILE: drivers/net/bnx2x.c:6918:
+ if (!(bp->supported & SUPPORTED_TP)) {
+ return -EINVAL;
+ }
WARNING: braces {} are not necessary for single statement blocks
#6984: FILE: drivers/net/bnx2x.c:6929:
+ if (!(bp->supported & SUPPORTED_FIBRE)) {
+ return -EINVAL;
+ }
WARNING: braces {} are not necessary for single statement blocks
#7012: FILE: drivers/net/bnx2x.c:6957:
+ if (!(bp->supported &
+ SUPPORTED_10baseT_Full)) {
+ return -EINVAL;
+ }
WARNING: braces {} are not necessary for single statement blocks
#7019: FILE: drivers/net/bnx2x.c:6964:
+ if (!(bp->supported &
+ SUPPORTED_10baseT_Half)) {
+ return -EINVAL;
+ }
WARNING: braces {} are not necessary for single statement blocks
#7030: FILE: drivers/net/bnx2x.c:6975:
+ if (!(bp->supported &
+ SUPPORTED_100baseT_Full)) {
+ return -EINVAL;
+ }
WARNING: braces {} are not necessary for single statement blocks
#7037: FILE: drivers/net/bnx2x.c:6982:
+ if (!(bp->supported &
+ SUPPORTED_100baseT_Half)) {
+ return -EINVAL;
+ }
WARNING: braces {} are not necessary for single statement blocks
#7047: FILE: drivers/net/bnx2x.c:6992:
+ if (cmd->duplex != DUPLEX_FULL) {
+ return -EINVAL;
+ }
WARNING: braces {} are not necessary for single statement blocks
#7050: FILE: drivers/net/bnx2x.c:6995:
+ if (!(bp->supported & SUPPORTED_1000baseT_Full)) {
+ return -EINVAL;
+ }
WARNING: braces {} are not necessary for single statement blocks
#7058: FILE: drivers/net/bnx2x.c:7003:
+ if (cmd->duplex != DUPLEX_FULL) {
+ return -EINVAL;
+ }
WARNING: braces {} are not necessary for single statement blocks
#7061: FILE: drivers/net/bnx2x.c:7006:
+ if (!(bp->supported & SUPPORTED_2500baseT_Full)) {
+ return -EINVAL;
+ }
WARNING: braces {} are not necessary for single statement blocks
#7069: FILE: drivers/net/bnx2x.c:7014:
+ if (cmd->duplex != DUPLEX_FULL) {
+ return -EINVAL;
+ }
WARNING: braces {} are not necessary for single statement blocks
#7072: FILE: drivers/net/bnx2x.c:7017:
+ if (!(bp->supported & SUPPORTED_10000baseT_Full)) {
+ return -EINVAL;
+ }
WARNING: braces {} are not necessary for single statement blocks
#7202: FILE: drivers/net/bnx2x.c:7147:
+ if (val & (MCPR_NVM_SW_ARB_ARB_ARB1 << port)) {
+ break;
+ }
WARNING: braces {} are not necessary for single statement blocks
#7234: FILE: drivers/net/bnx2x.c:7179:
+ if (!(val & (MCPR_NVM_SW_ARB_ARB_ARB1 << port))) {
+ break;
+ }
WARNING: braces {} are not necessary for single statement blocks
#7345: FILE: drivers/net/bnx2x.c:7290:
+ if (rc) {
+ return rc;
+ }
WARNING: braces {} are not necessary for single statement blocks
#7457: FILE: drivers/net/bnx2x.c:7402:
+ if (rc) {
+ return rc;
+ }
WARNING: braces {} are not necessary for single statement blocks
#7517: FILE: drivers/net/bnx2x.c:7462:
+ if (rc) {
+ return rc;
+ }
WARNING: braces {} are not necessary for single statement blocks
#7603: FILE: drivers/net/bnx2x.c:7548:
+ if (netif_running(bp->dev)) {
+ bnx2x_update_coalesce(bp);
+ }
WARNING: braces {} are not necessary for single statement blocks
#7632: FILE: drivers/net/bnx2x.c:7577:
+ if ((ering->rx_pending > MAX_RX_AVAIL) ||
+ (ering->tx_pending > MAX_TX_AVAIL) ||
+ (ering->tx_pending <= MAX_SKB_FRAGS + 4)) {
+
+ return -EINVAL;
+ }
WARNING: braces {} are not necessary for single statement blocks
#7948: FILE: drivers/net/bnx2x.c:7893:
+ if (bp->link_up) {
+ bnx2x_leds_set(bp, bp->line_speed);
+ }
WARNING: braces {} are not necessary for single statement blocks
#8017: FILE: drivers/net/bnx2x.c:7962:
+ if (bp->wol) {
+ pmcsr |= PCI_PM_CTRL_PME_ENABLE;
+ }
WARNING: braces {} are not necessary for single statement blocks
#8049: FILE: drivers/net/bnx2x.c:7994:
+ if (dev->flags & IFF_PROMISC) {
+ rx_mode = BNX2X_RX_MODE_PROMISC;
+
+ } else if (dev->flags & IFF_ALLMULTI ||
WARNING: braces {} are not necessary for single statement blocks
#8135: FILE: drivers/net/bnx2x.c:8080:
+ if (*fp->tx_cons_sb != fp->tx_pkt_cons) {
+ bnx2x_tx_int(fp, budget);
+ }
WARNING: braces {} are not necessary for single statement blocks
#8139: FILE: drivers/net/bnx2x.c:8084:
+ if (*fp->rx_cons_sb != fp->rx_comp_cons) {
+ work_done = bnx2x_rx_int(fp, budget);
+ }
WARNING: braces {} are not necessary for single statement blocks
#8173: FILE: drivers/net/bnx2x.c:8118:
+ if (unlikely(bp->panic)) {
+ return NETDEV_TX_BUSY;
+ }
WARNING: braces {} are not necessary for single statement blocks
#8267: FILE: drivers/net/bnx2x.c:8212:
+ else {
+ txbd->vlan = pkt_prod;
+ }
WARNING: multiple assignments should be avoided
#8277: FILE: drivers/net/bnx2x.c:8222:
+ txbd->nbd = nbd = skb_shinfo(skb)->nr_frags + ((pbd == NULL)? 1 : 2);
WARNING: braces {} are not necessary for single statement blocks
#8398: FILE: drivers/net/bnx2x.c:8343:
+ if (pbd) {
+ DP(NETIF_MSG_TX_QUEUED,
+ "PBD @%p ip_data %x ip_hlen %u ip_id %u lso_mss %u"
+ " tcp_flags %x xsum %x seq %u hlen %u\n",
+ pbd, pbd->global_data, pbd->ip_hlen, pbd->ip_id,
+ pbd->lso_mss, pbd->tcp_flags, pbd->tcp_pseudo_csum,
+ pbd->tcp_send_seq, pbd->total_hlen);
+ }
WARNING: braces {} are not necessary for single statement blocks
#8507: FILE: drivers/net/bnx2x.c:8452:
+ if (!capable(CAP_NET_ADMIN)) {
+ return -EPERM;
+ }
WARNING: braces {} are not necessary for single statement blocks
#8556: FILE: drivers/net/bnx2x.c:8501:
+ if (!bp->panic) {
+ bnx2x_panic();
+ }
WARNING: multiple assignments should be avoided
#8696: FILE: drivers/net/bnx2x.c:8641:
+ dev->base_addr = dev->mem_start = pci_resource_start(pdev, 0);
WARNING: braces {} are not necessary for single statement blocks
#8921: FILE: drivers/net/bnx2x.c:8866:
+ if (!rc) {
+ return rc;
+ }
WARNING: braces {} are not necessary for single statement blocks
#8945: FILE: drivers/net/bnx2x.c:8890:
+ if (rc) {
+ return rc;
+ }
CHECK: spinlock_t definition without comment
#9486: FILE: drivers/net/bnx2x.h:508:
+ spinlock_t spq_lock; /* Used to serialize slowpath
ERROR: need a space before the open brace '{'
#9824: FILE: drivers/net/bnx2x.h:846:
+ do{ \
ERROR: need consistent spacing around '+' (ctx:VxW)
#19015: FILE: drivers/net/bnx2x_hsi.h:4129:
+#define GENERAL_ATTEN_WORD(atten_name) ((94+ atten_name) / 32)
^
ERROR: no space before that close parenthesis ')'
#19016: FILE: drivers/net/bnx2x_hsi.h:4130:
+#define GENERAL_ATTEN_OFFSET(atten_name) (1 << ((94 + atten_name) % 32 ))
ERROR: trailing whitespace
#21068: FILE: drivers/net/bnx2x_init.h:10:
+ */ $
ERROR: Macros with complex values should be enclosed in parenthesis
#21196: FILE: drivers/net/bnx2x_init.h:138:
+#define INIT_INTERNAL0_MEM_WR(block_bar, block, reg, \
+ part, hw, value, off, len) \
WARNING: braces {} are not necessary for single statement blocks
#21307: FILE: drivers/net/bnx2x_init.h:249:
+ for (i = 0; i < 4; i++) {
+ DMAE_CLR(bp, storms[i], 0UL, STORM_INTMEM_SIZE / 4);
+ }
ERROR: need a space after that close brace '}'
#21329: FILE: drivers/net/bnx2x_init.h:271:
+ {{ 8 , 64 , 25}, { 16 , 64 , 25}, { 32 , 64 , 25}, { 64 , 64 , 41}},
ERROR: need a space after that close brace '}'
#21330: FILE: drivers/net/bnx2x_init.h:272:
+ {{ 4 , 8 , 4}, { 4 , 8 , 4}, { 4 , 8 , 4}, { 4 , 8 , 4}},
ERROR: need a space after that close brace '}'
#21331: FILE: drivers/net/bnx2x_init.h:273:
+ {{ 4 , 3 , 3}, { 4 , 3 , 3}, { 4 , 3 , 3}, { 4 , 3 , 3}},
ERROR: need a space after that close brace '}'
#21332: FILE: drivers/net/bnx2x_init.h:274:
+ {{ 8 , 3 , 6}, { 16 , 3 , 11}, { 16 , 3 , 11}, { 16 , 3 , 11}},
ERROR: need a space after that close brace '}'
#21333: FILE: drivers/net/bnx2x_init.h:275:
+ {{ 8 , 64 , 25}, { 16 , 64 , 25}, { 32 , 64 , 25}, { 64 , 64 , 41}},
ERROR: need a space after that close brace '}'
#21334: FILE: drivers/net/bnx2x_init.h:276:
+ {{ 8 , 3 , 6}, { 16 , 3 , 11}, { 32 , 3 , 21}, { 64 , 3 , 41}},
ERROR: need a space after that close brace '}'
#21335: FILE: drivers/net/bnx2x_init.h:277:
+ {{ 8 , 3 , 6}, { 16 , 3 , 11}, { 32 , 3 , 21}, { 64 , 3 , 41}},
ERROR: need a space after that close brace '}'
#21336: FILE: drivers/net/bnx2x_init.h:278:
+ {{ 8 , 3 , 6}, { 16 , 3 , 11}, { 32 , 3 , 21}, { 64 , 3 , 41}},
ERROR: need a space after that close brace '}'
#21337: FILE: drivers/net/bnx2x_init.h:279:
+ {{ 8 , 3 , 6}, { 16 , 3 , 11}, { 32 , 3 , 21}, { 64 , 3 , 41}},
ERROR: need a space after that close brace '}'
#21338: FILE: drivers/net/bnx2x_init.h:280:
+ {{ 8 , 3 , 6}, { 16 , 3 , 11}, { 32 , 3 , 21}, { 32 , 3 , 21}},
ERROR: need a space after that close brace '}'
#21339: FILE: drivers/net/bnx2x_init.h:281:
+ {{ 8 , 3 , 6}, { 16 , 3 , 11}, { 32 , 3 , 21}, { 32 , 3 , 21}},
ERROR: need a space after that close brace '}'
#21340: FILE: drivers/net/bnx2x_init.h:282:
+ {{ 8 , 3 , 6}, { 16 , 3 , 11}, { 32 , 3 , 21}, { 32 , 3 , 21}},
ERROR: need a space after that close brace '}'
#21341: FILE: drivers/net/bnx2x_init.h:283:
+ {{ 8 , 3 , 6}, { 16 , 3 , 11}, { 32 , 3 , 21}, { 32 , 3 , 21}},
ERROR: need a space after that close brace '}'
#21342: FILE: drivers/net/bnx2x_init.h:284:
+ {{ 8 , 3 , 6}, { 16 , 3 , 11}, { 32 , 3 , 21}, { 32 , 3 , 21}},
ERROR: need a space after that close brace '}'
#21343: FILE: drivers/net/bnx2x_init.h:285:
+ {{ 8 , 3 , 6}, { 16 , 3 , 11}, { 32 , 3 , 21}, { 32 , 3 , 21}},
ERROR: need a space after that close brace '}'
#21344: FILE: drivers/net/bnx2x_init.h:286:
+ {{ 8 , 3 , 6}, { 16 , 3 , 11}, { 32 , 3 , 21}, { 32 , 3 , 21}},
ERROR: need a space after that close brace '}'
#21345: FILE: drivers/net/bnx2x_init.h:287:
+ {{ 8 , 3 , 6}, { 16 , 3 , 11}, { 32 , 3 , 21}, { 32 , 3 , 21}},
ERROR: need a space after that close brace '}'
#21346: FILE: drivers/net/bnx2x_init.h:288:
+ {{ 8 , 3 , 6}, { 16 , 3 , 11}, { 32 , 3 , 21}, { 32 , 3 , 21}},
ERROR: need a space after that close brace '}'
#21347: FILE: drivers/net/bnx2x_init.h:289:
+ {{ 8 , 3 , 6}, { 16 , 3 , 11}, { 32 , 3 , 21}, { 32 , 3 , 21}},
ERROR: need a space after that close brace '}'
#21348: FILE: drivers/net/bnx2x_init.h:290:
+ {{ 8 , 3 , 6}, { 16 , 3 , 11}, { 32 , 3 , 21}, { 32 , 3 , 21}},
ERROR: need a space after that close brace '}'
#21349: FILE: drivers/net/bnx2x_init.h:291:
+ {{ 8 , 3 , 6}, { 16 , 3 , 11}, { 32 , 3 , 21}, { 32 , 3 , 21}},
ERROR: need a space after that close brace '}'
#21350: FILE: drivers/net/bnx2x_init.h:292:
+ {{ 8 , 3 , 6}, { 16 , 3 , 11}, { 32 , 3 , 21}, { 32 , 3 , 21}},
ERROR: need a space after that close brace '}'
#21351: FILE: drivers/net/bnx2x_init.h:293:
+ {{ 8 , 3 , 6}, { 16 , 3 , 11}, { 32 , 3 , 21}, { 32 , 3 , 21}},
ERROR: need a space after that close brace '}'
#21352: FILE: drivers/net/bnx2x_init.h:294:
+ {{ 8 , 3 , 6}, { 16 , 3 , 11}, { 32 , 3 , 21}, { 32 , 3 , 21}},
ERROR: need a space after that close brace '}'
#21353: FILE: drivers/net/bnx2x_init.h:295:
+ {{ 8 , 3 , 6}, { 16 , 3 , 11}, { 32 , 3 , 21}, { 32 , 3 , 21}},
ERROR: need a space after that close brace '}'
#21354: FILE: drivers/net/bnx2x_init.h:296:
+ {{ 8 , 3 , 6}, { 16 , 3 , 11}, { 32 , 3 , 21}, { 32 , 3 , 21}},
ERROR: need a space after that close brace '}'
#21355: FILE: drivers/net/bnx2x_init.h:297:
+ {{ 8 , 3 , 6}, { 16 , 3 , 11}, { 32 , 3 , 21}, { 32 , 3 , 21}},
ERROR: need a space after that close brace '}'
#21356: FILE: drivers/net/bnx2x_init.h:298:
+ {{ 8 , 3 , 6}, { 16 , 3 , 11}, { 32 , 3 , 21}, { 32 , 3 , 21}},
ERROR: need a space after that close brace '}'
#21357: FILE: drivers/net/bnx2x_init.h:299:
+ {{ 8 , 64 , 25}, { 16 , 64 , 41}, { 32 , 64 , 81}, { 64 , 64 , 120}}};
ERROR: need a space after that close brace '}'
#21360: FILE: drivers/net/bnx2x_init.h:302:
+ {{ 4 , 6 , 3}, { 4 , 6 , 3}, { 4 , 6 , 3}},
ERROR: need a space after that close brace '}'
#21361: FILE: drivers/net/bnx2x_init.h:303:
+ {{ 4 , 2 , 3}, { 4 , 2 , 3}, { 4 , 2 , 3}},
ERROR: need a space after that close brace '}'
#21362: FILE: drivers/net/bnx2x_init.h:304:
+ {{ 8 , 2 , 6}, { 16 , 2 , 11}, { 16 , 2 , 11}},
ERROR: need a space after that close brace '}'
#21363: FILE: drivers/net/bnx2x_init.h:305:
+ {{ 8 , 2 , 6}, { 16 , 2 , 11}, { 32 , 2 , 21}},
ERROR: need a space after that close brace '}'
#21364: FILE: drivers/net/bnx2x_init.h:306:
+ {{ 8 , 2 , 6}, { 16 , 2 , 11}, { 32 , 2 , 21}},
ERROR: need a space after that close brace '}'
#21365: FILE: drivers/net/bnx2x_init.h:307:
+ {{ 8 , 2 , 6}, { 16 , 2 , 11}, { 32 , 2 , 21}},
ERROR: need a space after that close brace '}'
#21366: FILE: drivers/net/bnx2x_init.h:308:
+ {{ 8 , 64 , 25}, { 16 , 64 , 25}, { 32 , 64 , 25}},
ERROR: need a space after that close brace '}'
#21367: FILE: drivers/net/bnx2x_init.h:309:
+ {{ 8 , 2 , 6}, { 16 , 2 , 11}, { 16 , 2 , 11}},
ERROR: need a space after that close brace '}'
#21368: FILE: drivers/net/bnx2x_init.h:310:
+ {{ 8 , 2 , 6}, { 16 , 2 , 11}, { 16 , 2 , 11}},
ERROR: need a space after that close brace '}'
#21369: FILE: drivers/net/bnx2x_init.h:311:
+ {{ 8 , 9 , 6}, { 16 , 9 , 11}, { 32 , 9 , 21}},
ERROR: need a space after that close brace '}'
#21370: FILE: drivers/net/bnx2x_init.h:312:
+ {{ 8 , 47 , 19}, { 16 , 47 , 19}, { 32 , 47 , 21}},
ERROR: need a space after that close brace '}'
#21371: FILE: drivers/net/bnx2x_init.h:313:
+ {{ 8 , 9 , 6}, { 16 , 9 , 11}, { 16 , 9 , 11}},
ERROR: need a space after that close brace '}'
#21372: FILE: drivers/net/bnx2x_init.h:314:
+ {{ 8 , 64 , 25}, { 16 , 64 , 41}, { 32 , 64 , 81}}};
ERROR: need a space after that close brace '}'
#21430: FILE: drivers/net/bnx2x_init.h:372:
+ PXP2_REGISTERS_PSWRQ_BW_UB28}};
ERROR: need a space after that close brace '}'
#21456: FILE: drivers/net/bnx2x_init.h:398:
+ PXP2_REGISTERS_RQ_BW_WR_UBOUND30}};
ERROR: no space before that close parenthesis ')'
#21573: FILE: drivers/net/bnx2x_init.h:515:
+ for (i = 0; i < 8; i++ ) {
WARNING: braces {} are not necessary for single statement blocks
#21604: FILE: drivers/net/bnx2x_init.h:546:
+ for (i = 0; i < 8; i++) {
+ crc_res |= (NewCRC[i] << i);
+ }
Your patch has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
