[PATCH v2 3/5] net: pch_gbe: use readx_poll_timeout_atomic() variant

[Andy Shevchenko]

Use readx_poll_timeout_atomic() instead of open coded variants.

While at it, add __iomem attribute to the parameter of pch_gbe_wait_clr_bit().

Signed-off-by: Andy Shevchenko <andriy.shevche...@linux.intel.com>
---
 .../ethernet/oki-semi/pch_gbe/pch_gbe_main.c  | 27 ++++++-------------
 1 file changed, 8 insertions(+), 19 deletions(-)

diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c 
b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
index 1038947cbac8..91de7faa6dfe 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
@@ -11,6 +11,7 @@
 
 #include <linux/gpio/consumer.h>
 #include <linux/gpio/machine.h>
+#include <linux/iopoll.h>
 #include <linux/module.h>
 #include <linux/net_tstamp.h>
 #include <linux/ptp_classify.h>
@@ -297,15 +298,12 @@ static s32 pch_gbe_mac_read_mac_addr(struct pch_gbe_hw 
*hw)
  * @reg:       Pointer of register
  * @bit:       Busy bit
  */
-static void pch_gbe_wait_clr_bit(void *reg, u32 bit)
+static void pch_gbe_wait_clr_bit(void __iomem *reg, u32 bit)
 {
        u32 tmp;
 
        /* wait busy */
-       tmp = 1000;
-       while ((ioread32(reg) & bit) && --tmp)
-               cpu_relax();
-       if (!tmp)
+       if (readx_poll_timeout_atomic(ioread32, reg, tmp, !(tmp & bit), 0, 10))
                pr_err("Error: busy bit is not cleared\n");
 }
 
@@ -489,18 +487,13 @@ u16 pch_gbe_mac_ctrl_miim(struct pch_gbe_hw *hw, u32 
addr, u32 dir, u32 reg,
                        u16 data)
 {
        struct pch_gbe_adapter *adapter = pch_gbe_hw_to_adapter(hw);
-       u32 data_out = 0;
-       unsigned int i;
        unsigned long flags;
+       u32 data_out;
 
        spin_lock_irqsave(&hw->miim_lock, flags);
 
-       for (i = 100; i; --i) {
-               if ((ioread32(&hw->reg->MIIM) & PCH_GBE_MIIM_OPER_READY))
-                       break;
-               udelay(20);
-       }
-       if (i == 0) {
+       if (readx_poll_timeout_atomic(ioread32, &hw->reg->MIIM, data_out,
+                                     data_out & PCH_GBE_MIIM_OPER_READY, 20, 
2000)) {
                netdev_err(adapter->netdev, "pch-gbe.miim won't go Ready\n");
                spin_unlock_irqrestore(&hw->miim_lock, flags);
                return 0;       /* No way to indicate timeout error */
@@ -508,12 +501,8 @@ u16 pch_gbe_mac_ctrl_miim(struct pch_gbe_hw *hw, u32 addr, 
u32 dir, u32 reg,
        iowrite32(((reg << PCH_GBE_MIIM_REG_ADDR_SHIFT) |
                  (addr << PCH_GBE_MIIM_PHY_ADDR_SHIFT) |
                  dir | data), &hw->reg->MIIM);
-       for (i = 0; i < 100; i++) {
-               udelay(20);
-               data_out = ioread32(&hw->reg->MIIM);
-               if ((data_out & PCH_GBE_MIIM_OPER_READY))
-                       break;
-       }
+       readx_poll_timeout_atomic(ioread32, &hw->reg->MIIM, data_out,
+                                 data_out & PCH_GBE_MIIM_OPER_READY, 20, 2000);
        spin_unlock_irqrestore(&hw->miim_lock, flags);
 
        netdev_dbg(adapter->netdev, "PHY %s: reg=%d, data=0x%04X\n",
-- 
2.30.2