Re: [net 05/11] can: flexcan: flexcan_chip_freeze(): fix chip freeze for missing bitrate

[Angelo Dureghello]

Hi all,

On 16/03/21 9:20 AM, Marc Kleine-Budde wrote:
> From: Angelo Dureghello <ang...@kernel-space.org>
>
> For cases when flexcan is built-in, bitrate is still not set at
> registering. So flexcan_chip_freeze() generates:
>
> [    1.860000] *** ZERO DIVIDE ***   FORMAT=4
> [    1.860000] Current process id is 1
> [    1.860000] BAD KERNEL TRAP: 00000000
> [    1.860000] PC: [<402e70c8>] flexcan_chip_freeze+0x1a/0xa8
>
> To allow chip freeze, using an hardcoded timeout when bitrate is still
> not set.
>
> Fixes: ec15e27cc890 ("can: flexcan: enable RX FIFO after FRZ/HALT valid")
> Link: 
> https://lore.kernel.org/r/20210315231510.650593-1-ang...@kernel-space.org
> Signed-off-by: Angelo Dureghello <ang...@kernel-space.org>
> [mkl: use if instead of ? operator]
> Signed-off-by: Marc Kleine-Budde <m...@pengutronix.de>
> ---
>  drivers/net/can/flexcan.c | 8 +++++++-
>  1 file changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
> index 134c05757a3b..57f3635ad8d7 100644
> --- a/drivers/net/can/flexcan.c
> +++ b/drivers/net/can/flexcan.c
> @@ -697,9 +697,15 @@ static int flexcan_chip_disable(struct flexcan_priv 
> *priv)
>  static int flexcan_chip_freeze(struct flexcan_priv *priv)
>  {
>       struct flexcan_regs __iomem *regs = priv->regs;
> -     unsigned int timeout = 1000 * 1000 * 10 / priv->can.bittiming.bitrate;
> +     unsigned int timeout;
> +     u32 bitrate = priv->can.bittiming.bitrate;
>       u32 reg;
>  
> +     if (bitrate)
> +             timeout = 1000 * 1000 * 10 / bitrate;
> +     else
> +             timeout = FLEXCAN_TIMEOUT_US / 10;
> +
>       reg = priv->read(&regs->mcr);
>       reg |= FLEXCAN_MCR_FRZ | FLEXCAN_MCR_HALT;
>       priv->write(reg, &regs->mcr);

?

Just curious, what's the issue with my "?" ?


Regards,
--
Angelo Dureghello