The bcm_sf2 driver uses the b53 driver as a library but does not make
usre of the b53_setup() function, this made it fail to inherit the
vlan_filtering_is_global attribute. Fix this by moving the assignment to
b53_switch_alloc() which is used by bcm_sf2.
Fixes: 7228b23e68f7 ("net: dsa: b53: Let DSA handle mismatched VLAN filtering
settings")
Signed-off-by: Florian Fainelli <f.faine...@gmail.com>
---
drivers/net/dsa/b53/b53_common.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index a162499bcafc..eb443721c58e 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -1105,13 +1105,6 @@ static int b53_setup(struct dsa_switch *ds)
b53_disable_port(ds, port);
}
- /* Let DSA handle the case were multiple bridges span the same switch
- * device and different VLAN awareness settings are requested, which
- * would be breaking filtering semantics for any of the other bridge
- * devices. (not hardware supported)
- */
- ds->vlan_filtering_is_global = true;
-
return b53_setup_devlink_resources(ds);
}
@@ -2664,6 +2657,13 @@ struct b53_device *b53_switch_alloc(struct device *base,
ds->ops = &b53_switch_ops;
ds->untag_bridge_pvid = true;
dev->vlan_enabled = true;
+ /* Let DSA handle the case were multiple bridges span the same switch
+ * device and different VLAN awareness settings are requested, which
+ * would be breaking filtering semantics for any of the other bridge
+ * devices. (not hardware supported)
+ */
+ ds->vlan_filtering_is_global = true;
+
mutex_init(&dev->reg_mutex);
mutex_init(&dev->stats_mutex);
--
2.25.1
