Phylink documentation says:
* Note that the PHY may be able to transform from one connection
* technology to another, so, eg, don't clear 1000BaseX just
* because the MAC is unable to BaseX mode. This is more about
* clearing unsupported speeds and duplex settings. The port modes
* should not be cleared; phylink_set_port_modes() will help with this.
So add the missing 10G modes. This allows SFP+ modules to be used with
the SolidRun boards.
Signed-off-by: Russell King <rmk+ker...@armlinux.org.uk>
---
drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
index ccaf7e35abeb..c2a889ac089a 100644
--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
@@ -125,6 +125,11 @@ static void dpaa2_mac_validate(struct phylink_config
*config,
case PHY_INTERFACE_MODE_10GBASER:
case PHY_INTERFACE_MODE_USXGMII:
phylink_set(mask, 10000baseT_Full);
+ phylink_set(mask, 10000baseCR_Full);
+ phylink_set(mask, 10000baseSR_Full);
+ phylink_set(mask, 10000baseLR_Full);
+ phylink_set(mask, 10000baseLRM_Full);
+ phylink_set(mask, 10000baseER_Full);
if (state->interface == PHY_INTERFACE_MODE_10GBASER)
break;
phylink_set(mask, 5000baseT_Full);
--
2.20.1
