>
> On Wed, Feb 17, 2021 at 04:02:13PM +0000, Ciara Loftus wrote:
> > Prior to this commit individual xsk tests were launched from the
> > shell script 'test_xsk.sh'. When adding a new test type, two new test
> > configurations had to be added to this file - one for each of the
> > supported XDP 'modes' (skb or drv). Should zero copy support be added to
> > the xsk selftest framework in the future, three new test configurations
> > would need to be added for each new test type. Each new test type also
> > typically requires new CLI arguments for the xdpxceiver program.
> >
> > This commit aims to reduce the overhead of adding new tests, by launching
> > the test configurations from within the xdpxceiver program itself, using
> > simple loops. Every test is run every time the C program is executed. Many
> > of the CLI arguments can be removed as a result.
> >
> > Signed-off-by: Ciara Loftus <ciara.lof...@intel.com>
> > ---
> > tools/testing/selftests/bpf/test_xsk.sh | 112 +-----------
> > tools/testing/selftests/bpf/xdpxceiver.c | 199 ++++++++++++---------
> > tools/testing/selftests/bpf/xdpxceiver.h | 27 ++-
> > tools/testing/selftests/bpf/xsk_prereqs.sh | 24 +--
> > 4 files changed, 139 insertions(+), 223 deletions(-)
> >
>
> Good cleanup! I have a series of fixes/cleanups as well and I need to
> introduce a new test over here, so your work makes it easier for me.
>
> One nit below and once you address Bjorn's request, then feel free to add
> my:
Thanks Björn and Maciej for the feedback. Will include your suggestions in the
v2.
I discovered some extra things to tweak for the v2 but hope to have it up
shortly.
Thanks,
Ciara
>
> Reviewed-by: Maciej Fijalkowski <maciej.fijalkow...@intel.com>
>
> [...]
>
> > +static int configure_skb(void)
> > +{
> > +
> > + char cmd[80];
> > +
> > + snprintf(cmd, sizeof(cmd), "ip link set dev %s xdpdrv off", ifdict[0]-
> >ifname);
> > + if (system(cmd)) {
> > + ksft_test_result_fail("Failed to configure native mode on
> iface %s\n",
> > + ifdict[0]->ifname);
> > + return -1;
> > + }
> > + snprintf(cmd, sizeof(cmd), "ip netns exec %s ip link set dev %s
> xdpdrv off",
> > + ifdict[1]->nsname, ifdict[1]->ifname);
> > + if (system(cmd)) {
> > + ksft_test_result_fail("Failed to configure native mode on
> iface/ns %s\n",
> > + ifdict[1]->ifname, ifdict[1]-
> >nsname);
> > + return -1;
> > + }
> > +
> > + cur_mode = TEST_MODE_SKB;
> > +
> > + return 0;
> > +
> > +}
> > +
> > +static int configure_drv(void)
> > +{
> > + char cmd[80];
> > +
> > + snprintf(cmd, sizeof(cmd), "ip link set dev %s xdpgeneric off",
> ifdict[0]->ifname);
> > + if (system(cmd)) {
> > + ksft_test_result_fail("Failed to configure native mode on
> iface %s\n",
> > + ifdict[0]->ifname);
> > + return -1;
> > + }
> > + snprintf(cmd, sizeof(cmd), "ip netns exec %s ip link set dev %s
> xdpgeneric off",
> > + ifdict[1]->nsname, ifdict[1]->ifname);
> > + if (system(cmd)) {
> > + ksft_test_result_fail("Failed to configure native mode on
> iface/ns %s\n",
> > + ifdict[1]->ifname, ifdict[1]-
> >nsname);
> > + return -1;
> > + }
> > +
> > + cur_mode = TEST_MODE_DRV;
> > +
> > + return 0;
> > +}
> > +
> > +static void run_pkt_test(int mode, int type)
> > +{
> > + test_type = type;
> > +
> > + /* reset defaults after potential previous test */
> > + xdp_flags = XDP_FLAGS_UPDATE_IF_NOEXIST;
> > + pkt_counter = 0;
> > + switching_notify = 0;
> > + bidi_pass = 0;
> > + prev_pkt = -1;
> > + ifdict[0]->fv.vector = tx;
> > + ifdict[1]->fv.vector = rx;
> > +
> > + switch (mode) {
> > + case (TEST_MODE_SKB):
> > + if (cur_mode != TEST_MODE_SKB)
> > + configure_skb();
>
> Should you check a return value over here?
>
> > + xdp_flags |= XDP_FLAGS_SKB_MODE;
> > + uut = TEST_MODE_SKB;
> > + break;
> > + case (TEST_MODE_DRV):
> > + if (cur_mode != TEST_MODE_DRV)
> > + configure_drv();
>
> ditto
>
> > + xdp_flags |= XDP_FLAGS_DRV_MODE;
> > + uut = TEST_MODE_DRV;
> > + break;
> > + default:
> > + break;
> > + }
> > +
> > + pthread_init_mutex();
> > +
> > + if ((test_type != TEST_TYPE_TEARDOWN) && (test_type !=
> TEST_TYPE_BIDI))
> > + testapp_validate();
> > + else
> > + testapp_sockets();
> > +
> > + pthread_destroy_mutex();
> > +}
> > +
> > int main(int argc, char **argv)
> > {
> > struct rlimit _rlim = { RLIM_INFINITY, RLIM_INFINITY };
> > @@ -1021,6 +1062,7 @@ int main(int argc, char **argv)
> > const char *IP2 = "192.168.100.161";
> > u16 UDP_DST_PORT = 2020;
> > u16 UDP_SRC_PORT = 2121;
> > + int i, j;
> >
> > ifaceconfig = malloc(sizeof(struct ifaceconfigobj));
> > memcpy(ifaceconfig->dst_mac, MAC1, ETH_ALEN);
> > @@ -1046,24 +1088,19 @@ int main(int argc, char **argv)
> >
> > init_iface_config(ifaceconfig);
> >
> > - pthread_init_mutex();
> > + ksft_set_plan(TEST_MODE_MAX * TEST_TYPE_MAX);
> >
> > - ksft_set_plan(1);
> > + configure_skb();
> > + cur_mode = TEST_MODE_SKB;
> >
> > - if (!opt_teardown && !opt_bidi) {
> > - testapp_validate();
> > - } else if (opt_teardown && opt_bidi) {
> > - ksft_test_result_fail("ERROR: parameters -T and -B cannot
> be used together\n");
> > - ksft_exit_xfail();
> > - } else {
> > - testapp_sockets();
> > + for (i = 0; i < TEST_MODE_MAX; i++) {
> > + for (j = 0; j < TEST_TYPE_MAX; j++)
> > + run_pkt_test(i, j);
> > }
> >
> > for (int i = 0; i < MAX_INTERFACES; i++)
> > free(ifdict[i]);
> >
> > - pthread_destroy_mutex();
> > -
> > ksft_exit_pass();
> >
> > return 0;
