On 2/12/2021 6:18 PM, Robert Hancock wrote:
> The default configuration for the BCM54616S PHY may not match the desired
> mode when using 1000BaseX or SGMII interface modes, such as when it is on
> an SFP module. Add code to explicitly set the correct mode using
> programming sequences provided by Bel-Fuse:
>
> https://www.belfuse.com/resources/datasheets/powersolutions/ds-bps-sfp-1gbt-05-series.pdf
> https://www.belfuse.com/resources/datasheets/powersolutions/ds-bps-sfp-1gbt-06-series.pdf
>
> Signed-off-by: Robert Hancock <robert.hanc...@calian.com>
Acked-by: Florian Fainelli <f.faine...@gmail.com>
--
Florian
