From: Peng Li <lipeng...@huawei.com>
To improve code readability and maintainability, separate
the command handling part and the status parsing part from
bloated hclge_set_vf_vlan_common().
Signed-off-by: Peng Li <lipeng...@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazh...@huawei.com>
---
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 63 +++++++++++++++-------
1 file changed, 44 insertions(+), 19 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index e2c5b8f..4fac22d 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -8786,32 +8786,16 @@ static void hclge_enable_vlan_filter(struct
hnae3_handle *handle, bool enable)
handle->netdev_flags &= ~HNAE3_VLAN_FLTR;
}
-static int hclge_set_vf_vlan_common(struct hclge_dev *hdev, u16 vfid,
- bool is_kill, u16 vlan,
- __be16 proto)
+static int hclge_set_vf_vlan_filter_cmd(struct hclge_dev *hdev, u16 vfid,
+ bool is_kill, u16 vlan,
+ struct hclge_desc *desc)
{
- struct hclge_vport *vport = &hdev->vport[vfid];
struct hclge_vlan_filter_vf_cfg_cmd *req0;
struct hclge_vlan_filter_vf_cfg_cmd *req1;
- struct hclge_desc desc[2];
u8 vf_byte_val;
u8 vf_byte_off;
int ret;
- /* if vf vlan table is full, firmware will close vf vlan filter, it
- * is unable and unnecessary to add new vlan id to vf vlan filter.
- * If spoof check is enable, and vf vlan is full, it shouldn't add
- * new vlan, because tx packets with these vlan id will be dropped.
- */
- if (test_bit(vfid, hdev->vf_vlan_full) && !is_kill) {
- if (vport->vf_info.spoofchk && vlan) {
- dev_err(&hdev->pdev->dev,
- "Can't add vlan due to spoof check is on and vf
vlan table is full\n");
- return -EPERM;
- }
- return 0;
- }
-
hclge_cmd_setup_basic_desc(&desc[0],
HCLGE_OPC_VLAN_FILTER_VF_CFG, false);
hclge_cmd_setup_basic_desc(&desc[1],
@@ -8841,6 +8825,18 @@ static int hclge_set_vf_vlan_common(struct hclge_dev
*hdev, u16 vfid,
return ret;
}
+ return 0;
+}
+
+static int hclge_check_vf_vlan_cmd_status(struct hclge_dev *hdev, u16 vfid,
+ bool is_kill, struct hclge_desc *desc)
+{
+ struct hclge_vlan_filter_vf_cfg_cmd *req0;
+ struct hclge_vlan_filter_vf_cfg_cmd *req1;
+
+ req0 = (struct hclge_vlan_filter_vf_cfg_cmd *)desc[0].data;
+ req1 = (struct hclge_vlan_filter_vf_cfg_cmd *)desc[1].data;
+
if (!is_kill) {
#define HCLGE_VF_VLAN_NO_ENTRY 2
if (!req0->resp_code || req0->resp_code == 1)
@@ -8877,6 +8873,35 @@ static int hclge_set_vf_vlan_common(struct hclge_dev
*hdev, u16 vfid,
return -EIO;
}
+static int hclge_set_vf_vlan_common(struct hclge_dev *hdev, u16 vfid,
+ bool is_kill, u16 vlan,
+ __be16 proto)
+{
+ struct hclge_vport *vport = &hdev->vport[vfid];
+ struct hclge_desc desc[2];
+ int ret;
+
+ /* if vf vlan table is full, firmware will close vf vlan filter, it
+ * is unable and unnecessary to add new vlan id to vf vlan filter.
+ * If spoof check is enable, and vf vlan is full, it shouldn't add
+ * new vlan, because tx packets with these vlan id will be dropped.
+ */
+ if (test_bit(vfid, hdev->vf_vlan_full) && !is_kill) {
+ if (vport->vf_info.spoofchk && vlan) {
+ dev_err(&hdev->pdev->dev,
+ "Can't add vlan due to spoof check is on and vf
vlan table is full\n");
+ return -EPERM;
+ }
+ return 0;
+ }
+
+ ret = hclge_set_vf_vlan_filter_cmd(hdev, vfid, is_kill, vlan, desc);
+ if (ret)
+ return ret;
+
+ return hclge_check_vf_vlan_cmd_status(hdev, vfid, is_kill, desc);
+}
+
static int hclge_set_port_vlan_filter(struct hclge_dev *hdev, __be16 proto,
u16 vlan_id, bool is_kill)
{
--
2.7.4
