RTL9000AA/AN as 100BASE-T1 is following:
- 100 Mbps
- Full duplex
- Link Status Change Interrupt
Signed-off-by: Yuusuke Ashizuka <ashid...@fujitsu.com>
Signed-off-by: Torii Kenichi <torii.k...@fujitsu.com>
---
v2:
- Remove the use of .ack_interrupt()
- Implement .handle_interrupt() callback
- Remove the slash from driver name
---
drivers/net/phy/realtek.c | 81 +++++++++++++++++++++++++++++++++++++++
1 file changed, 81 insertions(+)
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index 99ecd6c4c15a..1312e0eeecfa 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -60,6 +60,9 @@
#define RTL_LPADV_5000FULL BIT(6)
#define RTL_LPADV_2500FULL BIT(5)
+#define RTL9000A_GINMR 0x14
+#define RTL9000A_GINMR_LINK_STATUS BIT(4)
+
#define RTLGEN_SPEED_MASK 0x0630
#define RTL_GENERIC_PHYID 0x001cc800
@@ -655,6 +658,71 @@ static int rtlgen_resume(struct phy_device *phydev)
return ret;
}
+static int rtl9000a_config_init(struct phy_device *phydev)
+{
+ phydev->autoneg = AUTONEG_DISABLE;
+ phydev->speed = SPEED_100;
+ phydev->duplex = DUPLEX_FULL;
+
+ return 0;
+}
+
+static int rtl9000a_config_aneg(struct phy_device *phydev)
+{
+ return 0;
+}
+
+static int rtl9000a_ack_interrupt(struct phy_device *phydev)
+{
+ int err;
+
+ err = phy_read(phydev, RTL8211F_INSR);
+
+ return (err < 0) ? err : 0;
+}
+
+static int rtl9000a_config_intr(struct phy_device *phydev)
+{
+ u16 val;
+ int err;
+
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+ err = rtl9000a_ack_interrupt(phydev);
+ if (err)
+ return err;
+
+ val = (u16)~RTL9000A_GINMR_LINK_STATUS;
+ err = phy_write_paged(phydev, 0xa42, RTL9000A_GINMR, val);
+ } else {
+ val = ~0;
+ err = phy_write_paged(phydev, 0xa42, RTL9000A_GINMR, val);
+ if (err)
+ return err;
+
+ err = rtl9000a_ack_interrupt(phydev);
+ }
+
+ return phy_write_paged(phydev, 0xa42, RTL9000A_GINMR, val);
+}
+
+static irqreturn_t rtl9000a_handle_interrupt(struct phy_device *phydev)
+{
+ int irq_status;
+
+ irq_status = phy_read(phydev, RTL8211F_INSR);
+ if (irq_status < 0) {
+ phy_error(phydev);
+ return IRQ_NONE;
+ }
+
+ if (!(irq_status & RTL8211F_INER_LINK_STATUS))
+ return IRQ_NONE;
+
+ phy_trigger_machine(phydev);
+
+ return IRQ_HANDLED;
+}
+
static struct phy_driver realtek_drvs[] = {
{
PHY_ID_MATCH_EXACT(0x00008201),
@@ -823,6 +891,19 @@ static struct phy_driver realtek_drvs[] = {
.handle_interrupt = genphy_handle_interrupt_no_ack,
.suspend = genphy_suspend,
.resume = genphy_resume,
+ }, {
+ PHY_ID_MATCH_EXACT(0x001ccb00),
+ .name = "RTL9000AA_RTL9000AN Ethernet",
+ .features = PHY_BASIC_T1_FEATURES,
+ .config_init = rtl9000a_config_init,
+ .config_aneg = rtl9000a_config_aneg,
+ .read_status = genphy_update_link,
+ .config_intr = rtl9000a_config_intr,
+ .handle_interrupt = rtl9000a_handle_interrupt,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .read_page = rtl821x_read_page,
+ .write_page = rtl821x_write_page,
},
};
--
2.29.2
