On Mon, Dec 7, 2020 at 2:45 PM David Awogbemila <awogbem...@google.com> wrote: > > Patchset description: > This patchset introduces "raw addressing" mode to the GVE driver. > Previously (in "queue_page_list" or "qpl" mode), the driver would > pre-allocate and dma_map buffers to be used on egress and ingress. > On egress, it would copy data from the skb provided to the > pre-allocated buffers - this was expensive. > In raw addressing mode, the driver can avoid this copy and simply > dma_map the skb's data so that the NIC can use it. > On ingress, the driver passes buffers up to the networking stack and > then frees and reallocates buffers when necessary instead of using > skb_copy_to_linear_data. > Patch 3 separates the page refcount tracking mechanism > into a function gve_rx_can_recycle_buffer which uses get_page - this will > be changed in a future patch to eliminate the use of get_page in tracking > page refcounts. > > Changes from v9: > Patch 4: Use u64, not u32 for new tx stat counters. > > Catherine Sullivan (3): > gve: Add support for raw addressing device option > gve: Add support for raw addressing to the rx path > gve: Add support for raw addressing in the tx path > > David Awogbemila (1): > gve: Rx Buffer Recycling > > > drivers/net/ethernet/google/gve/gve.h | 39 +- > drivers/net/ethernet/google/gve/gve_adminq.c | 89 ++++- > drivers/net/ethernet/google/gve/gve_adminq.h | 15 +- > drivers/net/ethernet/google/gve/gve_desc.h | 19 +- > drivers/net/ethernet/google/gve/gve_ethtool.c | 2 + > drivers/net/ethernet/google/gve/gve_main.c | 11 +- > drivers/net/ethernet/google/gve/gve_rx.c | 364 +++++++++++++----- > drivers/net/ethernet/google/gve/gve_tx.c | 197 ++++++++-- > 8 files changed, 574 insertions(+), 162 deletions(-) > > Reviewed-by: Alexander Duyck <alexanderdu...@fb.com>
Normally the reviewed-by should be included on the individual patches instead of here. It can be moved if you end up needing to resubmit.
