This file looks bad in text editors.
Cc: "James E.J. Bottomley" <james.bottom...@hansenpartnership.com>
Cc: Helge Deller <del...@gmx.de>
Cc: linux-par...@vger.kernel.org
Signed-off-by: Vladimir Oltean <vladimir.olt...@nxp.com>
---
drivers/parisc/led.c | 128 +++++++++++++++++++++----------------------
1 file changed, 64 insertions(+), 64 deletions(-)
diff --git a/drivers/parisc/led.c b/drivers/parisc/led.c
index 36c6613f7a36..676a12bb94c9 100644
--- a/drivers/parisc/led.c
+++ b/drivers/parisc/led.c
@@ -47,10 +47,10 @@
#include <asm/pdc.h>
#include <linux/uaccess.h>
-/* The control of the LEDs and LCDs on PARISC-machines have to be done
+/* The control of the LEDs and LCDs on PARISC-machines have to be done
completely in software. The necessary calculations are done in a work queue
- task which is scheduled regularly, and since the calculations may consume a
- relatively large amount of CPU time, some of the calculations can be
+ task which is scheduled regularly, and since the calculations may consume a
+ relatively large amount of CPU time, some of the calculations can be
turned off with the following variables (controlled via procfs) */
static int led_type __read_mostly = -1;
@@ -80,7 +80,7 @@ struct lcd_block {
};
/* Structure returned by PDC_RETURN_CHASSIS_INFO */
-/* NOTE: we use unsigned long:16 two times, since the following member
+/* NOTE: we use unsigned long:16 two times, since the following member
lcd_cmd_reg_addr needs to be 64bit aligned on 64bit PA2.0-machines */
struct pdc_chassis_lcd_info_ret_block {
unsigned long model:16; /* DISPLAY_MODEL_XXXX */
@@ -103,7 +103,7 @@ struct pdc_chassis_lcd_info_ret_block {
#define KITTYHAWK_LCD_CMD F_EXTEND(0xf0190000UL) /* 64bit-ready */
#define KITTYHAWK_LCD_DATA (KITTYHAWK_LCD_CMD+1)
-/* lcd_info is pre-initialized to the values needed to program KittyHawk LCD's
+/* lcd_info is pre-initialized to the values needed to program KittyHawk LCD's
* HP seems to have used Sharp/Hitachi HD44780 LCDs most of the time. */
static struct pdc_chassis_lcd_info_ret_block
lcd_info __attribute__((aligned(8))) __read_mostly =
@@ -119,16 +119,16 @@ lcd_info __attribute__((aligned(8))) __read_mostly =
/* direct access to some of the lcd_info variables */
-#define LCD_CMD_REG lcd_info.lcd_cmd_reg_addr
-#define LCD_DATA_REG lcd_info.lcd_data_reg_addr
+#define LCD_CMD_REG lcd_info.lcd_cmd_reg_addr
+#define LCD_DATA_REG lcd_info.lcd_data_reg_addr
#define LED_DATA_REG lcd_info.lcd_cmd_reg_addr /* LASI & ASP only */
#define LED_HASLCD 1
#define LED_NOLCD 0
/* The workqueue must be created at init-time */
-static int start_task(void)
-{
+static int start_task(void)
+{
/* Display the default text now */
if (led_type == LED_HASLCD) lcd_print( lcd_text_default );
@@ -136,7 +136,7 @@ static int start_task(void)
if (lcd_no_led_support) return 0;
/* Create the work queue and queue the LED task */
- led_wq = create_singlethread_workqueue("led_wq");
+ led_wq = create_singlethread_workqueue("led_wq");
queue_delayed_work(led_wq, &led_task, 0);
return 0;
@@ -214,14 +214,14 @@ static ssize_t led_proc_write(struct file *file, const
char __user *buf,
case LED_HASLCD:
if (*cur && cur[strlen(cur)-1] == '\n')
cur[strlen(cur)-1] = 0;
- if (*cur == 0)
+ if (*cur == 0)
cur = lcd_text_default;
lcd_print(cur);
break;
default:
return 0;
}
-
+
return count;
parse_error:
@@ -267,9 +267,9 @@ static int __init led_create_procfs(void)
#endif
/*
- **
+ **
** led_ASP_driver()
- **
+ **
*/
#define LED_DATA 0x01 /* data to shift (0:on 1:off) */
#define LED_STROBE 0x02 /* strobe to clock data */
@@ -289,9 +289,9 @@ static void led_ASP_driver(unsigned char leds)
/*
- **
+ **
** led_LASI_driver()
- **
+ **
*/
static void led_LASI_driver(unsigned char leds)
{
@@ -301,16 +301,16 @@ static void led_LASI_driver(unsigned char leds)
/*
- **
+ **
** led_LCD_driver()
- **
+ **
*/
static void led_LCD_driver(unsigned char leds)
{
static int i;
static unsigned char mask[4] = { LED_HEARTBEAT, LED_DISK_IO,
LED_LAN_RCV, LED_LAN_TX };
-
+
static struct lcd_block * blockp[4] = {
&lcd_info.heartbeat,
&lcd_info.disk_io,
@@ -320,15 +320,15 @@ static void led_LCD_driver(unsigned char leds)
/* Convert min_cmd_delay to milliseconds */
unsigned int msec_cmd_delay = 1 + (lcd_info.min_cmd_delay / 1000);
-
- for (i=0; i<4; ++i)
+
+ for (i=0; i<4; ++i)
{
- if ((leds & mask[i]) != (lastleds & mask[i]))
+ if ((leds & mask[i]) != (lastleds & mask[i]))
{
gsc_writeb( blockp[i]->command, LCD_CMD_REG );
msleep(msec_cmd_delay);
-
- gsc_writeb( leds & mask[i] ? blockp[i]->on :
+
+ gsc_writeb( leds & mask[i] ? blockp[i]->on :
blockp[i]->off, LCD_DATA_REG );
msleep(msec_cmd_delay);
}
@@ -337,15 +337,15 @@ static void led_LCD_driver(unsigned char leds)
/*
- **
+ **
** led_get_net_activity()
- **
+ **
** calculate if there was TX- or RX-throughput on the network interfaces
** (analog to dev_get_info() from net/core/dev.c)
- **
+ **
*/
static __inline__ int led_get_net_activity(void)
-{
+{
#ifndef CONFIG_NET
return 0;
#else
@@ -355,7 +355,7 @@ static __inline__ int led_get_net_activity(void)
int retval;
rx_total = tx_total = 0;
-
+
/* we are running as a workqueue task, so we can use an RCU lookup */
rcu_read_lock();
for_each_netdev_rcu(&init_net, dev) {
@@ -390,14 +390,14 @@ static __inline__ int led_get_net_activity(void)
/*
- **
+ **
** led_get_diskio_activity()
- **
+ **
** calculate if there was disk-io in the system
- **
+ **
*/
static __inline__ int led_get_diskio_activity(void)
-{
+{
static unsigned long last_pgpgin, last_pgpgout;
unsigned long events[NR_VM_EVENT_ITEMS];
int changed;
@@ -418,7 +418,7 @@ static __inline__ int led_get_diskio_activity(void)
/*
** led_work_func()
- **
+ **
** manages when and which chassis LCD/LED gets updated
TODO:
@@ -453,9 +453,9 @@ static void led_work_func (struct work_struct *unused)
/* flash heartbeat-LED like a real heart
* (2 x short then a long delay)
*/
- if (count_HZ < HEARTBEAT_LEN ||
+ if (count_HZ < HEARTBEAT_LEN ||
(count_HZ >= HEARTBEAT_2ND_RANGE_START &&
- count_HZ < HEARTBEAT_2ND_RANGE_END))
+ count_HZ < HEARTBEAT_2ND_RANGE_END))
currentleds |= LED_HEARTBEAT;
}
@@ -488,10 +488,10 @@ static void led_work_func (struct work_struct *unused)
/*
** led_halt()
- **
+ **
** called by the reboot notifier chain at shutdown and stops all
** LED/LCD activities.
- **
+ **
*/
static int led_halt(struct notifier_block *, unsigned long, void *);
@@ -501,7 +501,7 @@ static struct notifier_block led_notifier = {
};
static int notifier_disabled = 0;
-static int led_halt(struct notifier_block *nb, unsigned long event, void *buf)
+static int led_halt(struct notifier_block *nb, unsigned long event, void *buf)
{
char *txt;
@@ -518,45 +518,45 @@ static int led_halt(struct notifier_block *nb, unsigned
long event, void *buf)
break;
default: return NOTIFY_DONE;
}
-
+
/* Cancel the work item and delete the queue */
if (led_wq) {
cancel_delayed_work_sync(&led_task);
destroy_workqueue(led_wq);
led_wq = NULL;
}
-
+
if (lcd_info.model == DISPLAY_MODEL_LCD)
lcd_print(txt);
else
if (led_func_ptr)
led_func_ptr(0xff); /* turn all LEDs ON */
-
+
return NOTIFY_OK;
}
/*
** register_led_driver()
- **
+ **
** registers an external LED or LCD for usage by this driver.
** currently only LCD-, LASI- and ASP-style LCD/LED's are supported.
- **
+ **
*/
int __init register_led_driver(int model, unsigned long cmd_reg, unsigned long
data_reg)
{
static int initialized;
-
+
if (initialized || !data_reg)
return 1;
-
+
lcd_info.model = model; /* store the values */
LCD_CMD_REG = (cmd_reg == LED_CMD_REG_NONE) ? 0 : cmd_reg;
switch (lcd_info.model) {
case DISPLAY_MODEL_LCD:
LCD_DATA_REG = data_reg;
- printk(KERN_INFO "LCD display at %lx,%lx registered\n",
+ printk(KERN_INFO "LCD display at %lx,%lx registered\n",
LCD_CMD_REG , LCD_DATA_REG);
led_func_ptr = led_LCD_driver;
led_type = LED_HASLCD;
@@ -575,7 +575,7 @@ int __init register_led_driver(int model, unsigned long
cmd_reg, unsigned long d
case DISPLAY_MODEL_OLD_ASP:
LED_DATA_REG = data_reg;
led_func_ptr = led_ASP_driver;
- printk(KERN_INFO "LED (ASP-style) display at %lx registered\n",
+ printk(KERN_INFO "LED (ASP-style) display at %lx registered\n",
LED_DATA_REG);
led_type = LED_NOLCD;
break;
@@ -585,8 +585,8 @@ int __init register_led_driver(int model, unsigned long
cmd_reg, unsigned long d
__func__, lcd_info.model);
return 1;
}
-
- /* mark the LCD/LED driver now as initialized and
+
+ /* mark the LCD/LED driver now as initialized and
* register to the reboot notifier chain */
initialized++;
register_reboot_notifier(&led_notifier);
@@ -601,11 +601,11 @@ int __init register_led_driver(int model, unsigned long
cmd_reg, unsigned long d
/*
** register_led_regions()
- **
+ **
** register_led_regions() registers the LCD/LED regions for /procfs.
- ** At bootup - where the initialisation of the LCD/LED normally happens -
+ ** At bootup - where the initialisation of the LCD/LED normally happens -
** not all internal structures of request_region() are properly set up,
- ** so that we delay the led-registration until after busdevices_init()
+ ** so that we delay the led-registration until after busdevices_init()
** has been executed.
**
*/
@@ -626,9 +626,9 @@ void __init register_led_regions(void)
/*
- **
+ **
** lcd_print()
- **
+ **
** Displays the given string on the LCD-Display of newer machines.
** lcd_print() disables/enables the timer-based led work queue to
** avoid a race condition while writing the CMD/DATA register pair.
@@ -640,7 +640,7 @@ int lcd_print( const char *str )
if (!led_func_ptr || lcd_info.model != DISPLAY_MODEL_LCD)
return 0;
-
+
/* temporarily disable the led work task */
if (led_wq)
cancel_delayed_work_sync(&led_task);
@@ -660,7 +660,7 @@ int lcd_print( const char *str )
gsc_writeb(' ', LCD_DATA_REG);
udelay(lcd_info.min_cmd_delay);
}
-
+
/* re-queue the work */
if (led_wq) {
queue_delayed_work(led_wq, &led_task, 0);
@@ -671,8 +671,8 @@ int lcd_print( const char *str )
/*
** led_init()
- **
- ** led_init() is called very early in the bootup-process from setup.c
+ **
+ ** led_init() is called very early in the bootup-process from setup.c
** and asks the PDC for an usable chassis LCD or LED.
** If the PDC doesn't return any info, then the LED
** is detected by lasi.c or asp.c and registered with the
@@ -715,20 +715,20 @@ int __init led_init(void)
(lcd_info.model==DISPLAY_MODEL_LCD) ? "LCD" :
(lcd_info.model==DISPLAY_MODEL_LASI) ? "LED" :
"unknown",
lcd_info.lcd_width, lcd_info.min_cmd_delay,
- __FILE__, sizeof(lcd_info),
+ __FILE__, sizeof(lcd_info),
chassis_info.actcnt, chassis_info.maxcnt));
DPRINTK((KERN_INFO "%s: cmd=%p, data=%p, reset1=%x, reset2=%x,
act_enable=%d\n",
- __FILE__, lcd_info.lcd_cmd_reg_addr,
- lcd_info.lcd_data_reg_addr, lcd_info.reset_cmd1,
+ __FILE__, lcd_info.lcd_cmd_reg_addr,
+ lcd_info.lcd_data_reg_addr, lcd_info.reset_cmd1,
lcd_info.reset_cmd2, lcd_info.act_enable ));
-
+
/* check the results. Some machines have a buggy PDC */
if (chassis_info.actcnt <= 0 || chassis_info.actcnt !=
chassis_info.maxcnt)
goto not_found;
switch (lcd_info.model) {
case DISPLAY_MODEL_LCD: /* LCD display */
- if (chassis_info.actcnt <
+ if (chassis_info.actcnt <
offsetof(struct pdc_chassis_lcd_info_ret_block,
_pad)-1)
goto not_found;
if (!lcd_info.act_enable) {
--
2.25.1
