Am 02.12.2020 um 21:03 schrieb [email protected]:
> From: Arthur Kiyanovski <[email protected]>
> 
> The patch changes the maximum number of RX/TX queues it advertises to
> the kernel (via alloc_etherdev_mq()) from a value received from the
> device to a constant value which is the minimum between 128 and the
> number of CPUs in the system.
> 
> By allocating the net_device struct with a constant number of queues,
> the driver is able to allocate it at a much earlier stage, before
> calling any ena_com functions. This would allow to make all log prints in
> ena_com to use netdev_* log functions instead or current pr_* ones.
> 

Did you test this? Usually using netdev_* before the net_device is
registered results in quite ugly messages. Therefore there's a number
of patches doing the opposite, replacing netdev_* with dev_* before
register_netdev(). See e.g.
22148df0d0bd ("r8169: don't use netif_info et al before net_device has been 
registered")


> Signed-off-by: Shay Agroskin <[email protected]>
> Signed-off-by: Arthur Kiyanovski <[email protected]>
> ---
>  drivers/net/ethernet/amazon/ena/ena_netdev.c | 46 ++++++++++----------
>  1 file changed, 23 insertions(+), 23 deletions(-)
> 
> diff --git a/drivers/net/ethernet/amazon/ena/ena_netdev.c 
> b/drivers/net/ethernet/amazon/ena/ena_netdev.c
> index df1884d57d1a..985dea1870b5 100644
> --- a/drivers/net/ethernet/amazon/ena/ena_netdev.c
> +++ b/drivers/net/ethernet/amazon/ena/ena_netdev.c
> @@ -29,6 +29,8 @@ MODULE_LICENSE("GPL");
>  /* Time in jiffies before concluding the transmitter is hung. */
>  #define TX_TIMEOUT  (5 * HZ)
>  
> +#define ENA_MAX_RINGS min_t(unsigned int, ENA_MAX_NUM_IO_QUEUES, 
> num_possible_cpus())
> +
>  #define ENA_NAPI_BUDGET 64
>  
>  #define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_IFUP 
> | \
> @@ -4176,18 +4178,34 @@ static int ena_probe(struct pci_dev *pdev, const 
> struct pci_device_id *ent)
>  
>       ena_dev->dmadev = &pdev->dev;
>  
> +     netdev = alloc_etherdev_mq(sizeof(struct ena_adapter), ENA_MAX_RINGS);
> +     if (!netdev) {
> +             dev_err(&pdev->dev, "alloc_etherdev_mq failed\n");
> +             rc = -ENOMEM;
> +             goto err_free_region;
> +     }
> +
> +     SET_NETDEV_DEV(netdev, &pdev->dev);
> +     adapter = netdev_priv(netdev);
> +     adapter->ena_dev = ena_dev;
> +     adapter->netdev = netdev;
> +     adapter->pdev = pdev;
> +     adapter->msg_enable = netif_msg_init(debug, DEFAULT_MSG_ENABLE);
> +
> +     pci_set_drvdata(pdev, adapter);
> +
>       rc = ena_device_init(ena_dev, pdev, &get_feat_ctx, &wd_state);
>       if (rc) {
>               dev_err(&pdev->dev, "ENA device init failed\n");
>               if (rc == -ETIME)
>                       rc = -EPROBE_DEFER;
> -             goto err_free_region;
> +             goto err_netdev_destroy;
>       }
>  
>       rc = ena_map_llq_mem_bar(pdev, ena_dev, bars);
>       if (rc) {
>               dev_err(&pdev->dev, "ENA llq bar mapping failed\n");
> -             goto err_free_ena_dev;
> +             goto err_device_destroy;
>       }
>  
>       calc_queue_ctx.ena_dev = ena_dev;
> @@ -4207,26 +4225,8 @@ static int ena_probe(struct pci_dev *pdev, const 
> struct pci_device_id *ent)
>               goto err_device_destroy;
>       }
>  
> -     /* dev zeroed in init_etherdev */
> -     netdev = alloc_etherdev_mq(sizeof(struct ena_adapter), 
> max_num_io_queues);
> -     if (!netdev) {
> -             dev_err(&pdev->dev, "alloc_etherdev_mq failed\n");
> -             rc = -ENOMEM;
> -             goto err_device_destroy;
> -     }
> -
> -     SET_NETDEV_DEV(netdev, &pdev->dev);
> -
> -     adapter = netdev_priv(netdev);
> -     pci_set_drvdata(pdev, adapter);
> -
> -     adapter->ena_dev = ena_dev;
> -     adapter->netdev = netdev;
> -     adapter->pdev = pdev;
> -
>       ena_set_conf_feat_params(adapter, &get_feat_ctx);
>  
> -     adapter->msg_enable = netif_msg_init(debug, DEFAULT_MSG_ENABLE);
>       adapter->reset_reason = ENA_REGS_RESET_NORMAL;
>  
>       adapter->requested_tx_ring_size = calc_queue_ctx.tx_queue_size;
> @@ -4257,7 +4257,7 @@ static int ena_probe(struct pci_dev *pdev, const struct 
> pci_device_id *ent)
>       if (rc) {
>               dev_err(&pdev->dev,
>                       "Failed to query interrupt moderation feature\n");
> -             goto err_netdev_destroy;
> +             goto err_device_destroy;
>       }
>       ena_init_io_rings(adapter,
>                         0,
> @@ -4335,11 +4335,11 @@ static int ena_probe(struct pci_dev *pdev, const 
> struct pci_device_id *ent)
>       ena_disable_msix(adapter);
>  err_worker_destroy:
>       del_timer(&adapter->timer_service);
> -err_netdev_destroy:
> -     free_netdev(netdev);
>  err_device_destroy:
>       ena_com_delete_host_info(ena_dev);
>       ena_com_admin_destroy(ena_dev);
> +err_netdev_destroy:
> +     free_netdev(netdev);
>  err_free_region:
>       ena_release_bars(ena_dev, pdev);
>  err_free_ena_dev:
> 

Reply via email to