On Wed, Nov 25, 2020 at 03:52:33PM +0000, Camelia Alexandra Groza wrote:
> > -----Original Message-----
> > From: Maciej Fijalkowski <maciej.fijalkow...@intel.com>
> > Sent: Tuesday, November 24, 2020 22:51
> > To: Camelia Alexandra Groza <camelia.gr...@nxp.com>
> > Cc: k...@kernel.org; bro...@redhat.com; sa...@kernel.org;
> > da...@davemloft.net; Madalin Bucur (OSS)
> > <madalin.bu...@oss.nxp.com>; Ioana Ciornei <ioana.cior...@nxp.com>;
> > netdev@vger.kernel.org
> > Subject: Re: [PATCH net-next v4 7/7] dpaa_eth: implement the A050385
> > erratum workaround for XDP
> > 
> > On Mon, Nov 23, 2020 at 07:36:25PM +0200, Camelia Groza wrote:
> > > For XDP TX, even tough we start out with correctly aligned buffers, the
> > > XDP program might change the data's alignment. For REDIRECT, we have no
> > > control over the alignment either.
> > >
> > > Create a new workaround for xdp_frame structures to verify the erratum
> > > conditions and move the data to a fresh buffer if necessary. Create a new
> > > xdp_frame for managing the new buffer and free the old one using the
> > XDP
> > > API.
> > >
> > > Due to alignment constraints, all frames have a 256 byte headroom that
> > > is offered fully to XDP under the erratum. If the XDP program uses all
> > > of it, the data needs to be move to make room for the xdpf backpointer.
> > 
> > Out of curiosity, wouldn't it be easier to decrease the headroom that is
> > given to xdp rather doing to full copy of a buffer in case you miss a few
> > bytes on headroom?
> 
> First of all, I'm not sure if offering less than XDP_PACKET_HEADROOM to XDP 
> programs is allowed. Second, we require the data to be strictly aligned under 
> this erratum. This first condition would be broken even if we reduce the size 
> of the offered headroom.
> 
> > >
> > > Disable the metadata support since the information can be lost.
> > >
> > > Acked-by: Madalin Bucur <madalin.bu...@oss.nxp.com>
> > > Signed-off-by: Camelia Groza <camelia.gr...@nxp.com>
> > > ---
> > >  drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 82
> > +++++++++++++++++++++++++-
> > >  1 file changed, 79 insertions(+), 3 deletions(-)
> > >
> > > diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
> > b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
> > > index 149b549..d8fc19d 100644
> > > --- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
> > > +++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
> > > @@ -2170,6 +2170,52 @@ static int dpaa_a050385_wa_skb(struct
> > net_device *net_dev, struct sk_buff **s)
> > >
> > >   return 0;
> > >  }
> > > +
> > > +static int dpaa_a050385_wa_xdpf(struct dpaa_priv *priv,
> > > +                         struct xdp_frame **init_xdpf)
> > > +{
> > > + struct xdp_frame *new_xdpf, *xdpf = *init_xdpf;
> > > + void *new_buff;
> > > + struct page *p;
> > > +
> > > + /* Check the data alignment and make sure the headroom is large
> > > +  * enough to store the xdpf backpointer. Use an aligned headroom
> > > +  * value.
> > > +  *
> > > +  * Due to alignment constraints, we give XDP access to the full 256
> > > +  * byte frame headroom. If the XDP program uses all of it, copy the
> > > +  * data to a new buffer and make room for storing the backpointer.
> > > +  */
> > > + if (PTR_IS_ALIGNED(xdpf->data, DPAA_A050385_ALIGN) &&
> > > +     xdpf->headroom >= priv->tx_headroom) {
> > > +         xdpf->headroom = priv->tx_headroom;
> > > +         return 0;
> > > + }
> > > +
> > > + p = dev_alloc_pages(0);
> > > + if (unlikely(!p))
> > > +         return -ENOMEM;
> > > +
> > > + /* Copy the data to the new buffer at a properly aligned offset */
> > > + new_buff = page_address(p);
> > > + memcpy(new_buff + priv->tx_headroom, xdpf->data, xdpf->len);
> > > +
> > > + /* Create an XDP frame around the new buffer in a similar fashion
> > > +  * to xdp_convert_buff_to_frame.
> > > +  */
> > > + new_xdpf = new_buff;
> > > + new_xdpf->data = new_buff + priv->tx_headroom;
> > > + new_xdpf->len = xdpf->len;
> > > + new_xdpf->headroom = priv->tx_headroom;
> > 
> > What if ptr was not aligned so you got here but tx_headroom was less than
> > xdpf->headroom? Shouldn't you choose the bigger one? Aren't you shrinking
> > the headroom for this case.
> 
> Yes, I am shrinking the headroom. At this point, the headroom's content isn't 
> relevant anymore (this path is executed when transmitting the frame after TX 
> or REDIRECT). What is important is the data's alignment, and it is dictated 
> by the headroom's (fd's offset) size.

So would it be possible to do a memmove within the existing buffer under
some circumstances and then have this current logic as a worst case
scenario? Majority of XDP progs won't consume all of the XDP headroom so I
think it's something worth pursuing.

Please also tell us the performance impact of that workaround. Grabbing
new page followed by memcpy is expensive.

> 
> > > + new_xdpf->frame_sz = DPAA_BP_RAW_SIZE;
> > > + new_xdpf->mem.type = MEM_TYPE_PAGE_ORDER0;
> > > +
> > > + /* Release the initial buffer */
> > > + xdp_return_frame_rx_napi(xdpf);
> > > +
> > > + *init_xdpf = new_xdpf;
> > > + return 0;
> > > +}
> > >  #endif
> > >
> > >  static netdev_tx_t
> > > @@ -2406,6 +2452,15 @@ static int dpaa_xdp_xmit_frame(struct
> > net_device *net_dev,
> > >   percpu_priv = this_cpu_ptr(priv->percpu_priv);
> > >   percpu_stats = &percpu_priv->stats;
> > >
> > > +#ifdef CONFIG_DPAA_ERRATUM_A050385
> > > + if (unlikely(fman_has_errata_a050385())) {
> > > +         if (dpaa_a050385_wa_xdpf(priv, &xdpf)) {
> > > +                 err = -ENOMEM;
> > > +                 goto out_error;
> > > +         }
> > > + }
> > > +#endif
> > > +
> > >   if (xdpf->headroom < DPAA_TX_PRIV_DATA_SIZE) {
> > >           err = -EINVAL;
> > >           goto out_error;
> > > @@ -2479,6 +2534,20 @@ static u32 dpaa_run_xdp(struct dpaa_priv *priv,
> > struct qm_fd *fd, void *vaddr,
> > >   xdp.frame_sz = DPAA_BP_RAW_SIZE - DPAA_TX_PRIV_DATA_SIZE;
> > >   xdp.rxq = &dpaa_fq->xdp_rxq;
> > >
> > > + /* We reserve a fixed headroom of 256 bytes under the erratum and
> > we
> > > +  * offer it all to XDP programs to use. If no room is left for the
> > > +  * xdpf backpointer on TX, we will need to copy the data.
> > > +  * Disable metadata support since data realignments might be
> > required
> > > +  * and the information can be lost.
> > > +  */
> > > +#ifdef CONFIG_DPAA_ERRATUM_A050385
> > > + if (unlikely(fman_has_errata_a050385())) {
> > > +         xdp_set_data_meta_invalid(&xdp);
> > > +         xdp.data_hard_start = vaddr;
> > > +         xdp.frame_sz = DPAA_BP_RAW_SIZE;
> > > + }
> > > +#endif
> > > +
> > >   xdp_act = bpf_prog_run_xdp(xdp_prog, &xdp);
> > >
> > >   /* Update the length and the offset of the FD */
> > > @@ -2486,7 +2555,8 @@ static u32 dpaa_run_xdp(struct dpaa_priv *priv,
> > struct qm_fd *fd, void *vaddr,
> > >
> > >   switch (xdp_act) {
> > >   case XDP_PASS:
> > > -         *xdp_meta_len = xdp.data - xdp.data_meta;
> > > +         *xdp_meta_len = xdp_data_meta_unsupported(&xdp) ? 0 :
> > > +                         xdp.data - xdp.data_meta;
> > 
> > You could consider surrounding this with ifdef and keep the old version in
> > the else branch so that old case is not hurt with that additional branch
> > that you're introducing with that ternary operator.
> 
> Sure, I'll do that. Thanks.
> 
> > >           break;
> > >   case XDP_TX:
> > >           /* We can access the full headroom when sending the frame
> > > @@ -3188,10 +3258,16 @@ static u16 dpaa_get_headroom(struct
> > dpaa_buffer_layout *bl,
> > >    */
> > >   headroom = (u16)(bl[port].priv_data_size + DPAA_HWA_SIZE);
> > >
> > > - if (port == RX)
> > > + if (port == RX) {
> > > +#ifdef CONFIG_DPAA_ERRATUM_A050385
> > > +         if (unlikely(fman_has_errata_a050385()))
> > > +                 headroom = XDP_PACKET_HEADROOM;
> > > +#endif
> > > +
> > >           return ALIGN(headroom,
> > DPAA_FD_RX_DATA_ALIGNMENT);
> > > - else
> > > + } else {
> > >           return ALIGN(headroom, DPAA_FD_DATA_ALIGNMENT);
> > > + }
> > >  }
> > >
> > >  static int dpaa_eth_probe(struct platform_device *pdev)
> > > --
> > > 1.9.1
> > >

Reply via email to