This small series gets my hardware into a working state. The key points are to make sure we don't force the link and that we ask the MAC for the link status. I also have updated my dts to say `phy-mode = "1000base-x";` and `managed = "in-band-status";`
I've dropped the patch for the 88E6123 as it's a distraction and I lack hardware to do any proper testing with it. Earlier versions are on the mailing list if anyone wants to pick it up in the future. I notice there's a series for mv88e6393x circulating on the netdev mailing list. As patch #1 is adding a new device specific op either this series will need updating to cover the mv88e6393x or the mv88e6393x series will need updating for the new op depenting on which lands first. Chris Packham (4): net: dsa: mv88e6xxx: Don't force link when using in-band-status net: dsa: mv88e6xxx: Support serdes ports on MV88E6097/6095/6185 net: dsa: mv88e6xxx: Add serdes interrupt support for MV88E6097 net: dsa: mv88e6xxx: Handle error in serdes_get_regs drivers/net/dsa/mv88e6xxx/chip.c | 47 ++++++++++- drivers/net/dsa/mv88e6xxx/chip.h | 4 + drivers/net/dsa/mv88e6xxx/port.c | 36 +++++++++ drivers/net/dsa/mv88e6xxx/port.h | 3 + drivers/net/dsa/mv88e6xxx/serdes.c | 123 +++++++++++++++++++++++++++-- drivers/net/dsa/mv88e6xxx/serdes.h | 9 +++ 6 files changed, 213 insertions(+), 9 deletions(-) -- 2.29.2
