Hi

On 18.11.2020 07:43, Hayes Wang wrote:
> Avoid r8153_ecm is compiled as built-in, if r8152 driver is compiled
> as modules. Otherwise, the r8153_ecm would be used, even though the
> device is supported by r8152 driver.
>
> Fixes: c1aedf015ebd ("net/usb/r8153_ecm: support ECM mode for RTL8153")
> Reported-by: Marek Szyprowski <m.szyprow...@samsung.com>
> Signed-off-by: Hayes Wang <hayesw...@realtek.com>

Yes, this looks like a proper fix.

Tested-by: Marek Szyprowski <m.szyprow...@samsung.com>

> ---
> v2:
> Use a separate Kconfig entry for r8153_ecm with proper dependencies.
>
>   drivers/net/usb/Kconfig  | 9 +++++++++
>   drivers/net/usb/Makefile | 3 ++-
>   2 files changed, 11 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
> index b46993d5f997..1e3719028780 100644
> --- a/drivers/net/usb/Kconfig
> +++ b/drivers/net/usb/Kconfig
> @@ -628,4 +628,13 @@ config USB_NET_AQC111
>         This driver should work with at least the following devices:
>         * Aquantia AQtion USB to 5GbE
>   
> +config USB_RTL8153_ECM
> +     tristate "RTL8153 ECM support"
> +     depends on USB_NET_CDCETHER && (USB_RTL8152 || USB_RTL8152=n)
> +     default y
> +     help
> +       This option supports ECM mode for RTL8153 ethernet adapter, when
> +       CONFIG_USB_RTL8152 is not set, or the RTL8153 device is not
> +       supported by r8152 driver.
> +
>   endif # USB_NET_DRIVERS
> diff --git a/drivers/net/usb/Makefile b/drivers/net/usb/Makefile
> index 99381e6bea78..4964f7b326fb 100644
> --- a/drivers/net/usb/Makefile
> +++ b/drivers/net/usb/Makefile
> @@ -13,7 +13,7 @@ obj-$(CONFIG_USB_LAN78XX)   += lan78xx.o
>   obj-$(CONFIG_USB_NET_AX8817X)       += asix.o
>   asix-y := asix_devices.o asix_common.o ax88172a.o
>   obj-$(CONFIG_USB_NET_AX88179_178A)      += ax88179_178a.o
> -obj-$(CONFIG_USB_NET_CDCETHER)       += cdc_ether.o r8153_ecm.o
> +obj-$(CONFIG_USB_NET_CDCETHER)       += cdc_ether.o
>   obj-$(CONFIG_USB_NET_CDC_EEM)       += cdc_eem.o
>   obj-$(CONFIG_USB_NET_DM9601)        += dm9601.o
>   obj-$(CONFIG_USB_NET_SR9700)        += sr9700.o
> @@ -41,3 +41,4 @@ obj-$(CONFIG_USB_NET_QMI_WWAN)      += qmi_wwan.o
>   obj-$(CONFIG_USB_NET_CDC_MBIM)      += cdc_mbim.o
>   obj-$(CONFIG_USB_NET_CH9200)        += ch9200.o
>   obj-$(CONFIG_USB_NET_AQC111)        += aqc111.o
> +obj-$(CONFIG_USB_RTL8153_ECM)        += r8153_ecm.o

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland

Reply via email to