This patch adds a check to see if we have libbpf support. By default the
system libbpf will be used, but static linking against a custom libbpf
version can be achieved by passing LIBBPF_DIR to configure.
Add another variable LIBBPF_FORCE to control whether to build iproute2
with libbpf. If set to on, then force to build with libbpf and exit if
not available. If set to off, then force to not build with libbpf.
Signed-off-by: Hangbin Liu <ha...@redhat.com>
v4:
1) Remove duplicate LIBBPF_CFLAGS
2) Remove un-needed -L since using static libbpf.a
3) Fix == not supported in dash
4) Extend LIBBPF_FORCE to support on/off, when set to on, stop building when
there is no libbpf support. If set to off, discard libbpf check.
5) Print libbpf version after checking
v3:
Check function bpf_program__section_name() separately and only use it
on higher libbpf version.
v2:
No update
---
configure | 108 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 108 insertions(+)
diff --git a/configure b/configure
index 307912aa..3081a2ac 100755
--- a/configure
+++ b/configure
@@ -2,6 +2,11 @@
# SPDX-License-Identifier: GPL-2.0
# This is not an autoconf generated configure
#
+# Influential LIBBPF environment variables:
+# LIBBPF_FORCE={on,off} on: require link against libbpf;
+# off: disable libbpf probing
+# LIBBPF_LIBDIR Path to libbpf to use
+
INCLUDE=${1:-"$PWD/include"}
# Output file which is input to Makefile
@@ -240,6 +245,106 @@ check_elf()
fi
}
+have_libbpf_basic()
+{
+ cat >$TMPDIR/libbpf_test.c <<EOF
+#include <bpf/libbpf.h>
+int main(int argc, char **argv) {
+ bpf_program__set_autoload(NULL, false);
+ bpf_map__ifindex(NULL);
+ bpf_map__set_pin_path(NULL, NULL);
+ bpf_object__open_file(NULL, NULL);
+ return 0;
+}
+EOF
+
+ $CC -o $TMPDIR/libbpf_test $TMPDIR/libbpf_test.c $LIBBPF_CFLAGS
$LIBBPF_LDLIBS >/dev/null 2>&1
+ local ret=$?
+
+ rm -f $TMPDIR/libbpf_test.c $TMPDIR/libbpf_test
+ return $ret
+}
+
+have_libbpf_sec_name()
+{
+ cat >$TMPDIR/libbpf_sec_test.c <<EOF
+#include <bpf/libbpf.h>
+int main(int argc, char **argv) {
+ void *ptr;
+ bpf_program__section_name(NULL);
+ return 0;
+}
+EOF
+
+ $CC -o $TMPDIR/libbpf_sec_test $TMPDIR/libbpf_sec_test.c $LIBBPF_CFLAGS
$LIBBPF_LDLIBS >/dev/null 2>&1
+ local ret=$?
+
+ rm -f $TMPDIR/libbpf_sec_test.c $TMPDIR/libbpf_sec_test
+ return $ret
+}
+
+check_force_libbpf_on()
+{
+ # if set LIBBPF_FORCE=on but no libbpf support, just exist the config
+ # process to make sure we don't build without libbpf.
+ if [ "$LIBBPF_FORCE" = on ]; then
+ echo " LIBBPF_FORCE=on set, but couldn't find a usable libbpf"
+ exit 1
+ fi
+}
+
+check_libbpf()
+{
+ # if set LIBBPF_FORCE=off, disable libbpf entirely
+ if [ "$LIBBPF_FORCE" = off ]; then
+ echo "no"
+ return
+ fi
+
+ if ! ${PKG_CONFIG} libbpf --exists && [ -z "$LIBBPF_DIR" ] ; then
+ echo "no"
+ check_force_libbpf_on
+ return
+ fi
+
+ if [ $(uname -m) = x86_64 ]; then
+ local LIBBPF_LIBDIR="${LIBBPF_DIR}/lib64"
+ else
+ local LIBBPF_LIBDIR="${LIBBPF_DIR}/lib"
+ fi
+
+ if [ -n "$LIBBPF_DIR" ]; then
+ LIBBPF_CFLAGS="-I${LIBBPF_DIR}/include"
+ LIBBPF_LDLIBS="${LIBBPF_LIBDIR}/libbpf.a -lz -lelf"
+ LIBBPF_VERSION=$(PKG_CONFIG_LIBDIR=${LIBBPF_LIBDIR}/pkgconfig
${PKG_CONFIG} libbpf --modversion)
+ else
+ LIBBPF_CFLAGS=$(${PKG_CONFIG} libbpf --cflags)
+ LIBBPF_LDLIBS=$(${PKG_CONFIG} libbpf --libs)
+ LIBBPF_VERSION=$(${PKG_CONFIG} libbpf --modversion)
+ fi
+
+ if ! have_libbpf_basic; then
+ echo "no"
+ echo " libbpf version $LIBBPF_VERSION is too low, please update it to
at least 0.1.0"
+ check_force_libbpf_on
+ return
+ else
+ echo "HAVE_LIBBPF:=y" >>$CONFIG
+ echo 'CFLAGS += -DHAVE_LIBBPF ' $LIBBPF_CFLAGS >> $CONFIG
+ echo 'LDLIBS += ' $LIBBPF_LDLIBS >>$CONFIG
+ fi
+
+ # bpf_program__title() is deprecated since libbpf 0.2.0, use
+ # bpf_program__section_name() instead if we support
+ if have_libbpf_sec_name; then
+ echo "HAVE_LIBBPF_SECTION_NAME:=y" >>$CONFIG
+ echo 'CFLAGS += -DHAVE_LIBBPF_SECTION_NAME ' >> $CONFIG
+ fi
+
+ echo "yes"
+ echo " libbpf version $LIBBPF_VERSION"
+}
+
check_selinux()
# SELinux is a compile time option in the ss utility
{
@@ -385,6 +490,9 @@ check_setns
echo -n "SELinux support: "
check_selinux
+echo -n "libbpf support: "
+check_libbpf
+
echo -n "ELF support: "
check_elf
--
2.25.4
