It was <2020-10-03 sob 12:13>, when Krzysztof Kozlowski wrote: > On Fri, 2 Oct 2020 at 21:22, Łukasz Stelmach <[email protected]> wrote: >> >> Add node for ax88796c ethernet chip. >> >> Signed-off-by: Łukasz Stelmach <[email protected]> >> --- >> arch/arm/boot/dts/exynos3250-artik5-eval.dts | 21 ++++++++++++++++++++ >> 1 file changed, 21 insertions(+) >> >> diff --git a/arch/arm/boot/dts/exynos3250-artik5-eval.dts >> b/arch/arm/boot/dts/exynos3250-artik5-eval.dts >> index 20446a846a98..7f115c348a2a 100644 >> --- a/arch/arm/boot/dts/exynos3250-artik5-eval.dts >> +++ b/arch/arm/boot/dts/exynos3250-artik5-eval.dts >> @@ -37,3 +37,24 @@ &mshc_2 { >> &serial_2 { >> status = "okay"; >> }; >> + >> +&spi_0 { >> + status = "okay"; >> + cs-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>, <0>; >> + >> + assigned-clocks = <&cmu CLK_MOUT_MPLL>, <&cmu >> CLK_DIV_MPLL_PRE>, <&cmu CLK_MOUT_SPI0>, <&cmu CLK_DIV_SPI0>, <&cmu >> CLK_DIV_SPI0_PRE>, <&cmu CLK_SCLK_SPI0>; > > No spaces before or after '='. >
You mean " = ", don't you?
>> + assigned-clock-parents = <&cmu CLK_FOUT_MPLL>, <&cmu
>> CLK_MOUT_MPLL>, <&cmu CLK_DIV_MPLL_PRE>, <&cmu CLK_MOUT_SPI0>, <&cmu
>> CLK_DIV_SPI0>, <&cmu CLK_DIV_SPI0_PRE>;
>
> This line is still too long. Please wrap it at 80. Checkpatch should
> complain about it... so it seems you did not run it. Please fix all
> checkpatch issues.
My idea was too keep assigned-clocks and assigned-clock-parrent lines
aligned, so it is clearly visible which parrent applies to which
clock. Is it inappropriate?
>> +
>> + ax88796c@0 {
>> + compatible = "asix,ax88796c";
>> + local-mac-address = [00 00 00 00 00 00]; /* Filled in by a
>> boot-loader */
>> + interrupt-parent = <&gpx2>;
>> + interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
>> + spi-max-frequency = <40000000>;
>> + reg = <0x0>;
>
> Put reg after compatible.
Done.
--
Łukasz Stelmach
Samsung R&D Institute Poland
Samsung Electronics
signature.asc
Description: PGP signature
