On 9/1/20 8:56 PM, Marek Vasut wrote: > On 8/9/20 1:01 PM, Marek Vasut wrote: >> On 5/31/20 8:13 PM, Marek Vasut wrote: >>> On systems like stm32mp1 where pins have both "default" and "sleep" pinmux >>> states in DT, the pins are in "sleep" state by default. Switch the pins into >>> the "default" state when bringing the interface up in m_can_start(), because >>> otherwise no CAN communication is possible. This replicates the behavior of >>> the resume path, which does the same. >>> >>> Signed-off-by: Marek Vasut <ma...@denx.de> >>> Cc: Alexandre Torgue <alexandre.tor...@st.com> >>> Cc: Marc Kleine-Budde <m...@pengutronix.de> >>> Cc: Wolfgang Grandegger <w...@grandegger.com> >>> To: linux-...@vger.kernel.org >>> --- >>> drivers/net/can/m_can/m_can.c | 2 ++ >>> 1 file changed, 2 insertions(+) >>> >>> diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c >>> index 02c5795b7393..76fadf2b8ac2 100644 >>> --- a/drivers/net/can/m_can/m_can.c >>> +++ b/drivers/net/can/m_can/m_can.c >>> @@ -1247,6 +1247,8 @@ static void m_can_start(struct net_device *dev) >>> /* basic m_can configuration */ >>> m_can_chip_config(dev); >>> >>> + pinctrl_pm_select_default_state(cdev->dev); >>> + >>> cdev->can.state = CAN_STATE_ERROR_ACTIVE; >>> >>> m_can_enable_all_interrupts(cdev); >>> >> >> Any news on this ? > > Almost another month has passed by, ping ?
Bump ?
