On Sat, 5 Sep 2020 12:32:33 +0200 Linus Walleij wrote:
> When removing a port from a VLAN we are just erasing the
> member config for the VLAN, which is wrong: other ports
> can be using it.
>
> Just mask off the port and only zero out the rest of the
> member config once ports using of the VLAN are removed
> from it.
>
> Reported-by: Florian Fainelli <f.faine...@gmail.com>
> Signed-off-by: Linus Walleij <linus.wall...@linaro.org>
I see you labeled this for net-net, but it reads like a fix, is it not?
Fixes: d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver")
Like commit 15ab7906cc92 ("net: dsa: rtl8366: Fix VLAN semantics") had?
> diff --git a/drivers/net/dsa/rtl8366.c b/drivers/net/dsa/rtl8366.c
> index 2dcde7a91721..bd3c947976ce 100644
> --- a/drivers/net/dsa/rtl8366.c
> +++ b/drivers/net/dsa/rtl8366.c
> @@ -471,13 +471,19 @@ int rtl8366_vlan_del(struct dsa_switch *ds, int port,
> return ret;
>
> if (vid == vlanmc.vid) {
> - /* clear VLAN member configurations */
> - vlanmc.vid = 0;
> - vlanmc.priority = 0;
> - vlanmc.member = 0;
> - vlanmc.untag = 0;
> - vlanmc.fid = 0;
> -
> + /* Remove this port from the VLAN */
> + vlanmc.member &= ~BIT(port);
> + vlanmc.untag &= ~BIT(port);
> + /*
> + * If no ports are members of this VLAN
> + * anymore then clear the whole member
> + * config so it can be reused.
> + */
> + if (!vlanmc.member && vlanmc.untag) {
> + vlanmc.vid = 0;
> + vlanmc.priority = 0;
> + vlanmc.fid = 0;
> + }
> ret = smi->ops->set_vlan_mc(smi, i, &vlanmc);
> if (ret) {
> dev_err(smi->dev,
