Replace all '/* fall through */' comments with the macro[1].

[1]: 
https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through

Signed-off-by: Leesoo Ahn <d...@ooseel.net>
---
 .../net/wireless/ralink/rt2x00/rt2400pci.c    |  3 ++-
 .../net/wireless/ralink/rt2x00/rt2500pci.c    |  3 ++-
 .../net/wireless/ralink/rt2x00/rt2800lib.c    | 27 ++++++++++---------
 drivers/net/wireless/ralink/rt2x00/rt61pci.c  |  3 ++-
 4 files changed, 20 insertions(+), 16 deletions(-)

diff --git a/drivers/net/wireless/ralink/rt2x00/rt2400pci.c 
b/drivers/net/wireless/ralink/rt2x00/rt2400pci.c
index c1ac933349d1..2eb06ffd20cd 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2400pci.c
@@ -1291,7 +1291,8 @@ static void rt2400pci_txdone(struct rt2x00_dev *rt2x00dev,
                        break;
                case 2: /* Failure, excessive retries */
                        __set_bit(TXDONE_EXCESSIVE_RETRY, &txdesc.flags);
-                       /* Fall through - this is a failed frame! */
+                       /* this is a failed frame! */
+                       fallthrough;
                default: /* Failure */
                        __set_bit(TXDONE_FAILURE, &txdesc.flags);
                }
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2500pci.c 
b/drivers/net/wireless/ralink/rt2x00/rt2500pci.c
index 0859adebd860..44c489a8891b 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2500pci.c
@@ -1419,7 +1419,8 @@ static void rt2500pci_txdone(struct rt2x00_dev *rt2x00dev,
                        break;
                case 2: /* Failure, excessive retries */
                        __set_bit(TXDONE_EXCESSIVE_RETRY, &txdesc.flags);
-                       /* Fall through - this is a failed frame! */
+                       /* this is a failed frame! */
+                       fallthrough;
                default: /* Failure */
                        __set_bit(TXDONE_FAILURE, &txdesc.flags);
                }
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c 
b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
index a779fe771a55..cbba7b3a0e1a 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -928,7 +928,7 @@ static void rt2800_rate_from_status(struct skb_frame_desc 
*skbdesc,
        switch (rt2x00_get_field32(status, TX_STA_FIFO_PHYMODE)) {
        case RATE_MODE_HT_GREENFIELD:
                flags |= IEEE80211_TX_RC_GREEN_FIELD;
-               /* fall through */
+               fallthrough;
        case RATE_MODE_HT_MIX:
                flags |= IEEE80211_TX_RC_MCS;
                break;
@@ -2037,6 +2037,7 @@ static void rt2800_config_ht_opmode(struct rt2x00_dev 
*rt2x00dev,
                 * We decide to protect everything
                 * -> fall through to mixed mode.
                 */
+               fallthrough;
        case IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED:
                /*
                 * Legacy STAs are present
@@ -2567,7 +2568,7 @@ static void rt2800_config_channel_rf3052(struct 
rt2x00_dev *rt2x00dev,
                switch (rt2x00dev->default_ant.tx_chain_num) {
                case 1:
                        rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 1);
-                       /* fall through */
+                       fallthrough;
                case 2:
                        rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 1);
                        break;
@@ -2576,7 +2577,7 @@ static void rt2800_config_channel_rf3052(struct 
rt2x00_dev *rt2x00dev,
                switch (rt2x00dev->default_ant.rx_chain_num) {
                case 1:
                        rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 1);
-                       /* fall through */
+                       fallthrough;
                case 2:
                        rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 1);
                        break;
@@ -4216,14 +4217,14 @@ static void rt2800_config_channel(struct rt2x00_dev 
*rt2x00dev,
                                   rf->channel > 14);
                rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G2_EN,
                                   rf->channel <= 14);
-               /* fall-through */
+               fallthrough;
        case 2:
                /* Turn on secondary PAs */
                rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN,
                                   rf->channel > 14);
                rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN,
                                   rf->channel <= 14);
-               /* fall-through */
+               fallthrough;
        case 1:
                /* Turn on primary PAs */
                rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN,
@@ -4241,12 +4242,12 @@ static void rt2800_config_channel(struct rt2x00_dev 
*rt2x00dev,
                /* Turn on tertiary LNAs */
                rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A2_EN, 1);
                rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G2_EN, 1);
-               /* fall-through */
+               fallthrough;
        case 2:
                /* Turn on secondary LNAs */
                rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1);
                rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1);
-               /* fall-through */
+               fallthrough;
        case 1:
                /* Turn on primary LNAs */
                rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1);
@@ -5438,10 +5439,10 @@ void rt2800_vco_calibration(struct rt2x00_dev 
*rt2x00dev)
                switch (rt2x00dev->default_ant.tx_chain_num) {
                case 3:
                        rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G2_EN, 1);
-                       /* fall through */
+                       fallthrough;
                case 2:
                        rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 1);
-                       /* fall through */
+                       fallthrough;
                case 1:
                default:
                        rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, 1);
@@ -5451,10 +5452,10 @@ void rt2800_vco_calibration(struct rt2x00_dev 
*rt2x00dev)
                switch (rt2x00dev->default_ant.tx_chain_num) {
                case 3:
                        rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A2_EN, 1);
-                       /* fall through */
+                       fallthrough;
                case 2:
                        rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN, 1);
-                       /* fall through */
+                       fallthrough;
                case 1:
                default:
                        rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, 1);
@@ -10100,10 +10101,10 @@ static int rt2800_probe_hw_mode(struct rt2x00_dev 
*rt2x00dev)
        switch (rx_chains) {
        case 3:
                spec->ht.mcs.rx_mask[2] = 0xff;
-               /* fall through */
+               fallthrough;
        case 2:
                spec->ht.mcs.rx_mask[1] = 0xff;
-               /* fall through */
+               fallthrough;
        case 1:
                spec->ht.mcs.rx_mask[0] = 0xff;
                spec->ht.mcs.rx_mask[4] = 0x1; /* MCS32 */
diff --git a/drivers/net/wireless/ralink/rt2x00/rt61pci.c 
b/drivers/net/wireless/ralink/rt2x00/rt61pci.c
index eefce76fc99b..16ec523375e2 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt61pci.c
@@ -2130,7 +2130,8 @@ static void rt61pci_txdone(struct rt2x00_dev *rt2x00dev)
                        break;
                case 6: /* Failure, excessive retries */
                        __set_bit(TXDONE_EXCESSIVE_RETRY, &txdesc.flags);
-                       /* Fall through - this is a failed frame! */
+                       /* this is a failed frame! */
+                       fallthrough;
                default: /* Failure */
                        __set_bit(TXDONE_FAILURE, &txdesc.flags);
                }
-- 
2.25.4

Reply via email to