In preparation for moving all MDIO drivers into drivers/net/mdio, move
the mdio-i2c header file into include/linux/mdio so it can be used by
both the MDIO driver and the SFP code which instantiates I2C MDIO
busses.
v2:
Add include/linux/mdio
Signed-off-by: Andrew Lunn <and...@lunn.ch>
---
MAINTAINERS | 1 +
drivers/net/phy/mdio-i2c.c | 3 +--
drivers/net/phy/sfp.c | 2 +-
{drivers/net/phy => include/linux/mdio}/mdio-i2c.h | 0
4 files changed, 3 insertions(+), 3 deletions(-)
rename {drivers/net/phy => include/linux/mdio}/mdio-i2c.h (100%)
diff --git a/MAINTAINERS b/MAINTAINERS
index 83f0cb32616e..e9719b8e511f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -15649,6 +15649,7 @@ F: drivers/net/phy/phylink.c
F: drivers/net/phy/sfp*
F: include/linux/phylink.h
F: include/linux/sfp.h
+F: include/linux/mdio/mdio-i2c.h
K:
phylink\.h|struct\s+phylink|\.phylink|>phylink_|phylink_(autoneg|clear|connect|create|destroy|disconnect|ethtool|helper|mac|mii|of|set|start|stop|test|validate)
SGI GRU DRIVER
diff --git a/drivers/net/phy/mdio-i2c.c b/drivers/net/phy/mdio-i2c.c
index 0746e2cc39ae..09200a70b315 100644
--- a/drivers/net/phy/mdio-i2c.c
+++ b/drivers/net/phy/mdio-i2c.c
@@ -10,10 +10,9 @@
* of their settings.
*/
#include <linux/i2c.h>
+#include <linux/mdio/mdio-i2c.h>
#include <linux/phy.h>
-#include "mdio-i2c.h"
-
/*
* I2C bus addresses 0x50 and 0x51 are normally an EEPROM, which is
* specified to be present in SFP modules. These correspond with PHY
diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c
index c24b0e83dd32..5250dcdf46a4 100644
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -7,6 +7,7 @@
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/jiffies.h>
+#include <linux/mdio/mdio-i2c.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/of.h>
@@ -16,7 +17,6 @@
#include <linux/slab.h>
#include <linux/workqueue.h>
-#include "mdio-i2c.h"
#include "sfp.h"
#include "swphy.h"
diff --git a/drivers/net/phy/mdio-i2c.h b/include/linux/mdio/mdio-i2c.h
similarity index 100%
rename from drivers/net/phy/mdio-i2c.h
rename to include/linux/mdio/mdio-i2c.h
--
2.28.0
