From: "hongbo.wang" <hongbo.w...@nxp.com>
1. the patch 0001* is for setting single port into 802.1AD(QinQ) mode,
before this patch, the function dsa_slave_vlan_rx_add_vid didn't pass
the parameter "proto" to next port level, so switch's port can't get
parameter "proto"
after applying this patch, the following command can be supported:
ip link set br0 type bridge vlan_protocol 802.1ad
ip link add link swp1 name swp1.100 type vlan protocol 802.1ad id 100
2. the patch 0002* is for setting QinQ related registers in ocelot
switch driver, after applying this patch, the switch(VSC99599)'s port can
enable or disable QinQ mode.
3. Version log
v4:
a. modify slave.c to support "ip set br0 type bridge vlan_protocol 802.1ad"
b. modify ocelot.c, if enable QinQ, set VLAN_AWARE_ENA and VLAN_POP_CNT per
port when vlan_filter=1
v3: combine two patches to one post
hongbo.wang (2):
net: dsa: Add protocol support for 802.1AD when adding or deleting
vlan for dsa switch port
net: dsa: ocelot: Add support for QinQ Operation
drivers/net/dsa/ocelot/felix.c | 12 +++++++
drivers/net/ethernet/mscc/ocelot.c | 53 +++++++++++++++++++++++++-----
include/net/switchdev.h | 1 +
include/soc/mscc/ocelot.h | 2 ++
net/dsa/dsa_priv.h | 4 +--
net/dsa/port.c | 6 ++--
net/dsa/slave.c | 27 +++++++++++----
net/dsa/tag_8021q.c | 4 +--
8 files changed, 89 insertions(+), 20 deletions(-)
--
2.17.1
