This is a followup implementation after series https://patchwork.ozlabs.org/project/netdev/cover/20200514095727.1361-1-irussk...@marvell.com/
This is an implementation of devlink health infrastructure. With this we are now able to report HW errors to devlink, and it'll take its own actions depending on user configuration to capture and store the dump at the bad moment, and to request the driver to recover the device. So far we do not differentiate global device failures or specific PCI function failures. This means that some errors specific to one physical function will affect an entire device. This is not yet fully designed and verified, will followup in future. Solution was verified with artificial HW errors generated, existing tools for dump analysis could be used. Igor Russkikh (11): qed: move out devlink logic into a new file qed/qede: make devlink survive recovery qed: swap param init and publish qed: fix kconfig help entries qed: implement devlink info request qed: health reporter init deinit seq qed: use devlink logic to report errors qed*: make use of devlink recovery infrastructure qed: implement devlink dump qed: align adjacent indent qede: make driver reliable on unload after failures drivers/net/ethernet/qlogic/Kconfig | 5 +- drivers/net/ethernet/qlogic/qed/Makefile | 1 + drivers/net/ethernet/qlogic/qed/qed.h | 3 +- drivers/net/ethernet/qlogic/qed/qed_dev.c | 10 + drivers/net/ethernet/qlogic/qed/qed_devlink.c | 255 ++++++++++++++++++ drivers/net/ethernet/qlogic/qed/qed_devlink.h | 20 ++ drivers/net/ethernet/qlogic/qed/qed_main.c | 116 +------- drivers/net/ethernet/qlogic/qede/qede.h | 2 + drivers/net/ethernet/qlogic/qede/qede_main.c | 35 ++- include/linux/qed/qed_if.h | 23 +- 10 files changed, 341 insertions(+), 129 deletions(-) create mode 100644 drivers/net/ethernet/qlogic/qed/qed_devlink.c create mode 100644 drivers/net/ethernet/qlogic/qed/qed_devlink.h -- 2.17.1
