On Thu, Jul 23, 2020 at 02:26:00AM +0000, Michael Kelley wrote:
> From: boqun.f...@gmail.com <boqun.f...@gmail.com> Sent: Wednesday, July 22,
> 2020 6:52 PM
> >
> > On Thu, Jul 23, 2020 at 12:13:07AM +0000, Michael Kelley wrote:
> > > From: Boqun Feng <boqun.f...@gmail.com> Sent: Monday, July 20, 2020 6:42
> > > PM
> > > >
> > > > Hyper-V always use 4k page size (HV_HYP_PAGE_SIZE), so when
> > > > communicating with Hyper-V, a guest should always use HV_HYP_PAGE_SIZE
> > > > as the unit for page related data. For storvsc, the data is
> > > > vmbus_packet_mpb_array. And since in scsi_cmnd, sglist of pages (in unit
> > > > of PAGE_SIZE) is used, we need convert pages in the sglist of scsi_cmnd
> > > > into Hyper-V pages in vmbus_packet_mpb_array.
> > > >
> > > > This patch does the conversion by dividing pages in sglist into Hyper-V
> > > > pages, offset and indexes in vmbus_packet_mpb_array are recalculated
> > > > accordingly.
> > > >
> > > > Signed-off-by: Boqun Feng <boqun.f...@gmail.com>
> > > > ---
> > > > drivers/scsi/storvsc_drv.c | 27 +++++++++++++++++++++------
> > > > 1 file changed, 21 insertions(+), 6 deletions(-)
> > > >
> > > > diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
> > > > index fb41636519ee..c54d25f279bc 100644
> > > > --- a/drivers/scsi/storvsc_drv.c
> > > > +++ b/drivers/scsi/storvsc_drv.c
> > > > @@ -1561,7 +1561,7 @@ static int storvsc_queuecommand(struct Scsi_Host
> > > > *host,
> > struct
> > > > scsi_cmnd *scmnd)
> > > > struct hv_host_device *host_dev = shost_priv(host);
> > > > struct hv_device *dev = host_dev->dev;
> > > > struct storvsc_cmd_request *cmd_request = scsi_cmd_priv(scmnd);
> > > > - int i;
> > > > + int i, j, k;
> > > > struct scatterlist *sgl;
> > > > unsigned int sg_count = 0;
> > > > struct vmscsi_request *vm_srb;
> > > > @@ -1569,6 +1569,8 @@ static int storvsc_queuecommand(struct Scsi_Host
> > > > *host,
> > struct
> > > > scsi_cmnd *scmnd)
> > > > struct vmbus_packet_mpb_array *payload;
> > > > u32 payload_sz;
> > > > u32 length;
> > > > + int subpage_idx = 0;
> > > > + unsigned int hvpg_count = 0;
> > > >
> > > > if (vmstor_proto_version <= VMSTOR_PROTO_VERSION_WIN8) {
> > > > /*
> > > > @@ -1643,23 +1645,36 @@ static int storvsc_queuecommand(struct
> > > > Scsi_Host *host,
> > struct
> > > > scsi_cmnd *scmnd)
> > > > payload_sz = sizeof(cmd_request->mpb);
> > > >
> > > > if (sg_count) {
> > > > - if (sg_count > MAX_PAGE_BUFFER_COUNT) {
> > > > + hvpg_count = sg_count * (PAGE_SIZE / HV_HYP_PAGE_SIZE);
> > >
> > > The above calculation doesn't take into account the offset in the
> > > first sglist or the overall length of the transfer, so the value of
> > > hvpg_count
> > > could be quite a bit bigger than it needs to be. For example, with a 64K
> > > page size and an 8 Kbyte transfer size that starts at offset 60K in the
> > > first page, hvpg_count will be 32 when it really only needs to be 2.
> > >
> > > The nested loops below that populate the pfn_array take the
> > > offset into account when starting, so that's good. But it will
> > > potentially
> > > leave allocated entries unused. Furthermore, the nested loops could
> > > terminate early when enough Hyper-V size pages are mapped to PFNs
> > > based on the length of the transfer, even if all of the last guest size
> > > page has not been mapped to PFNs. Like the offset at the beginning of
> > > first guest size page in the sglist, there's potentially an unused portion
> > > at the end of the last guest size page in the sglist.
> > >
> >
> > Good point. I think we could calculate the exact hvpg_count as follow:
> >
> > hvpg_count = 0;
> > cur_sgl = sgl;
> >
> > for (i = 0; i < sg_count; i++) {
> > hvpg_count += HVPFN_UP(cur_sg->length)
> > cur_sgl = sg_next(cur_sgl);
> > }
> >
>
> The downside would be going around that loop a lot of times when
> the page size is 4K bytes and the I/O transfer size is something like
> 256K bytes. I think this gives the right result in constant time: the
> starting offset within a Hyper-V page, plus the transfer length,
> rounded up to a Hyper-V page size, and divided by the Hyper-V
> page size.
>
Ok, then:
hvpg_offset = sgl->offset & ~HV_HYP_PAGE_MASK;
hvpg_count = HVPFN_UP(hv_offset + length);
?
Thanks!
Regards,
Boqun
>
> > > > + if (hvpg_count > MAX_PAGE_BUFFER_COUNT) {
> > > >
> > > > - payload_sz = (sg_count * sizeof(u64) +
> > > > + payload_sz = (hvpg_count * sizeof(u64) +
> > > > sizeof(struct
> > > > vmbus_packet_mpb_array));
> > > > payload = kzalloc(payload_sz, GFP_ATOMIC);
> > > > if (!payload)
> > > > return SCSI_MLQUEUE_DEVICE_BUSY;
> > > > }
> > > >
> > > > + /*
> > > > + * sgl is a list of PAGEs, and payload->range.pfn_array
> > > > + * expects the page number in the unit of
> > > > HV_HYP_PAGE_SIZE (the
> > > > + * page size that Hyper-V uses, so here we need to
> > > > divide PAGEs
> > > > + * into HV_HYP_PAGE in case that PAGE_SIZE >
> > > > HV_HYP_PAGE_SIZE.
> > > > + */
> > > > payload->range.len = length;
> > > > - payload->range.offset = sgl[0].offset;
> > > > + payload->range.offset = sgl[0].offset &
> > > > ~HV_HYP_PAGE_MASK;
> > > > + subpage_idx = sgl[0].offset >> HV_HYP_PAGE_SHIFT;
> > > >
> > > > cur_sgl = sgl;
> > > > + k = 0;
> > > > for (i = 0; i < sg_count; i++) {
> > > > - payload->range.pfn_array[i] =
> > > > - page_to_pfn(sg_page((cur_sgl)));
> > > > + for (j = subpage_idx; j < (PAGE_SIZE /
> > > > HV_HYP_PAGE_SIZE); j++) {
> > >
> > > In the case where PAGE_SIZE == HV_HYP_PAGE_SIZE, would it help the
> > > compiler
> > > eliminate the loop if local variable j is declared as unsigned? In that
> > > case the test in the
> > > for statement will always be false.
> > >
> >
> > Good point! I did the following test:
> >
> > test.c:
> >
> > int func(unsigned int input, int *arr)
> > {
> > unsigned int i;
> > int result = 0;
> >
> > for (i = input; i < 1; i++)
> > result += arr[i];
> >
> > return result;
> > }
> >
> > if I define i as "int", I got:
> >
> > 0000000000000000 <func>:
> > 0: 85 ff test %edi,%edi
> > 2: 7f 2c jg 30 <func+0x30>
> > 4: 48 63 d7 movslq %edi,%rdx
> > 7: f7 df neg %edi
> > 9: 45 31 c0 xor %r8d,%r8d
> > c: 89 ff mov %edi,%edi
> > e: 48 8d 04 96 lea (%rsi,%rdx,4),%rax
> > 12: 48 01 d7 add %rdx,%rdi
> > 15: 48 8d 54 be 04 lea 0x4(%rsi,%rdi,4),%rdx
> > 1a: 66 0f 1f 44 00 00 nopw 0x0(%rax,%rax,1)
> > 20: 44 03 00 add (%rax),%r8d
> > 23: 48 83 c0 04 add $0x4,%rax
> > 27: 48 39 d0 cmp %rdx,%rax
> > 2a: 75 f4 jne 20 <func+0x20>
> > 2c: 44 89 c0 mov %r8d,%eax
> > 2f: c3 retq
> > 30: 45 31 c0 xor %r8d,%r8d
> > 33: 44 89 c0 mov %r8d,%eax
> > 36: c3 retq
> >
> > and when I define i as "unsigned int", I got:
> >
> > 0000000000000000 <func>:
> > 0: 85 ff test %edi,%edi
> > 2: 75 03 jne 7 <func+0x7>
> > 4: 8b 06 mov (%rsi),%eax
> > 6: c3 retq
> > 7: 31 c0 xor %eax,%eax
> > 9: c3 retq
> >
> > So clearly it helps, I will change this in the next version.
>
> Wow! The compiler is good ....
>
> >
> > Regards,
> > Boqun
> >
> > > > + payload->range.pfn_array[k] =
> > > > +
> > > > page_to_hvpfn(sg_page((cur_sgl))) + j;
> > > > + k++;
> > > > + }
> > > > cur_sgl = sg_next(cur_sgl);
> > > > + subpage_idx = 0;
> > > > }
> > > > }
> > > >
> > > > --
> > > > 2.27.0
> > >
