Hi Michal,
This is my network card:
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411
PCI Express Gigabit Ethernet Controller (rev 0c)
Subsystem: Realtek Semiconductor Co., Ltd. Device 0123
Kernel driver in use: r8169
On the Realtek website
(https://www.realtek.com/en/products/communications-network-ics/item/rtl8168e)
it says that both wake-on-lan and remote wake-on-lan are
supported. I got the wake-on-lan from my local network working, but I have
problems getting the remote wake-on-lan to work.
When I set 'Wake-on' to 'g' and suspend my system, everything works fine (the
router does lose the ip address assigned to the mac address of the system). I
figured the SecureOn password is meant to forward magic packets to the correct
machine when the router does not have an ip address assigned to a mac address,
i.e. port-forwarding does not work.
Ethtool 'Supports Wake-on' gives 'pumbg', and when I try to set 'Wake-on' to
's' I get:
netlink error: cannot enable unsupported WoL mode (offset 36)
netlink error: Invalid argument
Does this mean that remote wake-on-lan is not supported (according to ethtool)?
---
I also tried to set 'Wake-on' to 'b' and 'bg' but then the systems turns back
on almost immediately for both settings.
---
Hope you can help getting the remote wake-on-lan to work,
Best regards,
Mischa.
