"kernel":"5.4.50", "system":"ARMv7 Processor rev 1
(v7l)","model":"Turris
Omnia","board_name":"cznic,turris-omnia","release":{"distribution":"OpenWrt","version":"SNAPSHOT","revision":"r13719-66e04abbb6","target":"mvebu/cortexa9","}CPU Marvell Armada 385 88F6820 | Switch Marvell 88E6176 soft bridge br-lan enslaving DSA ports lan0 lan1 lan2 DSA master device eth1 (subsequent ip l exhibits slaves as lanX@eth1) ---------- After perusal of https://www.kernel.org/doc/Documentation/networking/switchdev.txt it is my understanding that offloading works only for static FDB entries, though not clear to me: * what the logic is behind, and * why DSA ports are not static FDB entries by default (would only seem logical) That said queried bridge fdb for lan2 (as example here), producing: 44:8a:5b:47:0b:c2 dev lan2 master br-lan 44:8a:5b:47:0b:c2 dev lan2 vlan 1 self then went ahead with bridge fdb add 44:8a:5b:47:0b:c2 dev lan2 vlan 1 self resulting in 44:8a:5b:47:0b:c2 dev lan2 master br-lan 44:8a:5b:47:0b:c2 dev lan2 vlan 1 self static So it is static now but nothing about offload still. Next up ip l s br-lan ty bridge vlan_filtering 1 checking again bridge fdb and now exhibiting 44:8a:5b:47:0b:c2 dev lan2 vlan 1 master br-lan 44:8a:5b:47:0b:c2 dev lan2 master br-lan 44:8a:5b:47:0b:c2 dev lan2 vlan 1 self static Do I suffer some sort of misconception of how to get it working, missing something?
