On Thu, Jun 18, 2020 at 5:24 AM Florian Fainelli <f.faine...@gmail.com> wrote: > On 6/17/2020 1:31 AM, Linus Walleij wrote:
> > Make sure that setting VLAN 0 has the same effect > > and does not try to actually tell the hardware to use > > VLAN 0 on the port because that will not work. > > Why, you are not really describing what happens if VID = 0 is programmed? OK I'll add some words about it to the commit message. The packets doesn't go through the switch is the short answer, I cannot give any better answer I think because, well, realtek-type documentation (none). > It also sounds like you should be setting > configure_vlan_while_not_filtering if you need the switch to be > configured with VLAN awareness no matter whether there is a bridge > configured or not. Oh another thing I didn't know existed, I'll try this, but it needs to be a separate patch I think, possibly removing some code for default VLANs. Thanks! Linus Walleij
