> +Ethernet switch connected memory mapped to the host, CPU port wired to gmac0:
> +
> +soc {
> + switch0: switch@0xff240000 {
> + compatible = "hirschmann,hellcreek";
> + status = "okay";
> + reg = <0xff240000 0x1000 /* TSN base */
> + 0xff250000 0x1000>; /* PTP base */
> + dsa,member = <0 0>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + label = "cpu";
> + ethernet = <&gmac0>;
> + };
> +
> + port@2 {
> + reg = <2>;
> + label = "lan0";
> + phy-handle = <&phy1>;
> + };
> +
> + port@3 {
> + reg = <3>;
> + label = "lan1";
> + phy-handle = <&phy2>;
> + };
> + };
> + };
> +};
> +
> +&gmac0 {
> + status = "okay";
> + phy-mode = "mii";
> +
> + fixed-link {
> + speed = <100>;
> + full-duplex;
Hi Kurt
The switch is 100/100Mbps right? The MAC is only Fast ethernet. Do you
need some properties in the port@0 node to tell the switch to only use
100Mbps? I would expect it to default to 1G. Not looked at the code
yet...
Andrew
