Signed-off-by: David Ahern <dsah...@kernel.org>
---
tools/testing/selftests/net/fib_nexthops.sh | 334 +++++++++++++++++++-
1 file changed, 330 insertions(+), 4 deletions(-)
diff --git a/tools/testing/selftests/net/fib_nexthops.sh
b/tools/testing/selftests/net/fib_nexthops.sh
index dee567f7576a..4db390438885 100755
--- a/tools/testing/selftests/net/fib_nexthops.sh
+++ b/tools/testing/selftests/net/fib_nexthops.sh
@@ -5,11 +5,21 @@
# 2001:db8:91::1 | 2001:db8:91::2 |
# 172.16.1.1 | 172.16.1.2 |
# veth1 <---|---> veth2 |
-# | veth5 <--|--> veth6 172.16.101.1
+# | veth6 <--|--> veth5 172.16.101.1
# veth3 <---|---> veth4 | 2001:db8:101::1
# 172.16.2.1 | 172.16.2.2 |
# 2001:db8:92::1 | 2001:db8:92::2 |
#
+# For active/backup testing:
+# ns: me | ns: peer2 | ns: remote
+# 2001:db8:81::1 | 2001:db8:81::2 |
+# 172.16.81.1 | 172.16.81.2 |
+# veth21 <---|---> veth22 |
+# | veth26 <--|--> veth25 <--> br
+# veth23 <---|---> veth24 |
+# 172.16.82.1 | 172.16.82.2 |
+# 2001:db8:82::1 | 2001:db8:82::2 |
+#
# This test is for checking IPv4 and IPv6 FIB behavior with nexthop
# objects. Device reference counts and network namespace cleanup tested
# by use of network namespace for peer.
@@ -19,8 +29,8 @@ ret=0
ksft_skip=4
# all tests in this script. Can be overridden with -t option
-IPV4_TESTS="ipv4_fcnal ipv4_grp_fcnal ipv4_withv6_fcnal ipv4_fcnal_runtime
ipv4_large_grp ipv4_compat_mode ipv4_fdb_grp_fcnal ipv4_torture"
-IPV6_TESTS="ipv6_fcnal ipv6_grp_fcnal ipv6_fcnal_runtime ipv6_large_grp
ipv6_compat_mode ipv6_fdb_grp_fcnal ipv6_torture"
+IPV4_TESTS="ipv4_fcnal ipv4_grp_fcnal ipv4_withv6_fcnal ipv4_fcnal_runtime
ipv4_large_grp ipv4_compat_mode ipv4_fdb_grp_fcnal ipv4_torture ipv4_ab_group"
+IPV6_TESTS="ipv6_fcnal ipv6_grp_fcnal ipv6_fcnal_runtime ipv6_large_grp
ipv6_compat_mode ipv6_fdb_grp_fcnal ipv6_torture ipv6_ab_group"
ALL_TESTS="basic ${IPV4_TESTS} ${IPV6_TESTS}"
TESTS="${ALL_TESTS}"
@@ -179,11 +189,60 @@ setup()
set +e
}
+setup_ab()
+{
+ create_ns peer2
+
+ set -e
+ $IP li add veth21 type veth peer name veth22
+ $IP li set veth21 up
+ $IP addr add 172.16.81.1/24 dev veth21
+ $IP -6 addr add 2001:db8:81::1/64 dev veth21 nodad
+
+ $IP li add veth23 type veth peer name veth24
+ $IP li set veth23 up
+ $IP addr add 172.16.82.1/24 dev veth23
+ $IP -6 addr add 2001:db8:82::1/64 dev veth23 nodad
+
+ $IP li set veth22 netns peer2 up
+ ip -netns peer2 addr add 172.16.81.2/24 dev veth22
+ ip -netns peer2 -6 addr add 2001:db8:81::2/64 dev veth22 nodad
+
+ $IP li set veth24 netns peer2 up
+ ip -netns peer2 addr add 172.16.82.2/24 dev veth24
+ ip -netns peer2 -6 addr add 2001:db8:82::2/64 dev veth24 nodad
+
+ ip -netns remote li set veth5 down
+ ip -netns remote addr flush dev veth5
+ ip -netns remote li add br0 type bridge
+ ip -netns remote li add veth25 type veth peer name veth26
+ ip -netns remote li set veth25 master br0 up
+ ip -netns remote li set veth5 master br0 up
+ ip -netns remote li set br0 up
+
+ ip -netns remote addr add dev br0 172.16.101.1/24
+ ip -netns remote -6 addr add dev br0 2001:db8:101::1/64 nodad
+
+ ip -netns remote li set veth26 netns peer2 up
+ ip -netns peer2 addr add dev veth26 172.16.101.3/24
+ ip -netns peer2 -6 addr add dev veth26 2001:db8:101::3/64 nodad
+
+ ip -netns remote ro add 172.16.1.0/24 nexthop via 172.16.101.2
+ ip -netns remote ro add 172.16.2.0/24 nexthop via 172.16.101.2
+ ip -netns remote ro add 172.16.81.0/24 nexthop via 172.16.101.3
+ ip -netns remote ro add 172.16.82.0/24 nexthop via 172.16.101.3
+ ip -netns remote -6 ro add 2001:db8:91::/64 nexthop via 2001:db8:101::2
+ ip -netns remote -6 ro add 2001:db8:92::/64 nexthop via 2001:db8:101::2
+ ip -netns remote -6 ro add 2001:db8:81::/64 nexthop via 2001:db8:101::3
+ ip -netns remote -6 ro add 2001:db8:82::/64 nexthop via 2001:db8:101::3
+ set +e
+}
+
cleanup()
{
local ns
- for ns in me peer remote; do
+ for ns in me peer peer2 remote; do
ip netns del ${ns} 2>/dev/null
done
}
@@ -335,6 +394,273 @@ stop_ip_monitor()
return $rc
}
+################################################################################
+# active-backup nexthops
+
+check_nexthop_ab_support()
+{
+ $IP nexthop help 2>&1 | grep -q active-backup
+ if [ $? -ne 0 ]; then
+ echo "SKIP: iproute2 too old, missing active-backup nexthop
support"
+ return $ksft_skip
+ fi
+}
+
+ipv6_ab_group()
+{
+ local rc
+
+ echo
+ echo "IPv6 active-backup groups"
+ echo "-------------------------"
+
+ check_nexthop_ab_support
+ if [ $? -eq $ksft_skip ]; then
+ return $ksft_skip
+ fi
+
+ setup_ab
+
+ run_cmd "$IP nexthop add id 11 via 2001:db8:91::2 dev veth1"
+ run_cmd "$IP nexthop add id 12 via 2001:db8:81::2 dev veth21"
+ run_cmd "$IP nexthop add id 101 group 11/12 active-backup"
+ check_nexthop "id 101" "id 101 group 11/12 active-backup"
+ log_test $? 0 "Create active-backup group"
+
+ run_cmd "$IP ro add 2001:db8:101::/64 nhid 101"
+ check_route6 "2001:db8:101::1" "2001:db8:101::/64 nhid 101 via
2001:db8:91::2 dev veth1 metric 1024"
+ log_test $? 0 "Route list shows active device"
+
+ $IP -o ro get 2001:db8:101::1 2>/dev/null | grep -q "dev veth1"
+ log_test $? 0 "Route get shows active device"
+
+ # carrier down or admin down on nexthop device removes that entry
+ run_cmd "ip -netns peer li set veth2 down"
+ check_nexthop "id 101" "id 101 group 12 active-backup"
+ log_test $? 0 "Carrier down removes active"
+
+ $IP -o ro get 2001:db8:101::1 2>/dev/null | grep -q "dev veth21"
+ log_test $? 0 "Route get shows backup device"
+
+ run_cmd "$IP li set veth21 down"
+ $IP nexthop sh id 101 2>/dev/null
+ log_test $? 2 "Link down on backup removes nexthop"
+
+ check_route "2001:db8:101::1" ""
+ log_test $? 0 "Route removed after a-b nexthop removed"
+
+ # restore device state
+ run_cmd "ip -netns peer li set veth2 up"
+ run_cmd "$IP li set veth21 up"
+
+ # a/b with mpath
+ run_cmd "$IP nexthop flush"
+ run_cmd "$IP nexthop add id 11 via 2001:db8:91::2 dev veth1"
+ run_cmd "$IP nexthop add id 12 via 2001:db8:92::2 dev veth3"
+ run_cmd "$IP nexthop add id 21 via 2001:db8:81::2 dev veth21"
+ run_cmd "$IP nexthop add id 22 via 2001:db8:82::2 dev veth23"
+ run_cmd "$IP nexthop add id 101 group 11/21 active-backup"
+ run_cmd "$IP nexthop add id 102 group 12/22 active-backup"
+ run_cmd "$IP nexthop add id 103 group 101/102"
+ log_test $? 0 "Multipath with active-backup paths"
+
+ run_cmd "$IP nexthop ls"
+ run_cmd "$IP ro add 2001:db8:101::/64 nhid 103"
+ run_cmd "ip netns exec me ping -c1 -w1 2001:db8:101::1"
+ log_test $? 0 "ping with multipath containing active-backup paths"
+
+ run_cmd "ip -netns peer li set veth2 down"
+ check_nexthop "id 103" "id 103 group 101/102"
+ log_test $? 0 "Multipath still shows 2 paths after carrier down in a/b"
+
+ run_cmd "ip netns exec me ping -c1 -w1 2001:db8:101::1"
+ log_test $? 0 "ping with still works after carrier down"
+
+ run_cmd "ip -netns peer li set veth2 up"
+ run_cmd "$IP nexthop ls"
+ run_cmd "$IP -6 ro ls"
+
+ run_cmd "$IP li set veth21 down"
+ check_nexthop "id 103" "id 103 group 102"
+ log_test $? 0 "Multipath shows 1 path after admin down on new active"
+ run_cmd "ip netns exec me ping -c1 -w1 2001:db8:101::1"
+ log_test $? 0 "ping with still works after mpath loss of a-b path"
+
+ run_cmd "$IP li set veth21 up"
+ run_cmd "$IP nexthop ls"
+ run_cmd "$IP -6 ro ls"
+
+ #
+ # negative tests
+ #
+ # active points to invalid gw
+ run_cmd "$IP nexthop flush"
+ run_cmd "$IP nexthop add id 11 via 2001:db8:91::3 dev veth1"
+ run_cmd "$IP nexthop add id 12 via 2001:db8:81::2 dev veth21"
+ run_cmd "$IP nexthop add id 101 group 11/12 active-backup"
+ run_cmd "$IP ro add 2001:db8:101::/64 nhid 101"
+
+ # failed neigh for gateway - should fallback to backup
+ run_cmd "${IP} -6 neigh add 2001:db8:91::3 dev veth1 nud failed"
+ $IP -o ro get 2001:db8:101::1 2>/dev/null | grep -q "dev veth21"
+ log_test $? 0 "Route get shows backup device with invalid neigh"
+
+ run_cmd "$IP nexthop flush"
+ run_cmd "$IP nexthop add id 11 via 2001:db8:91::2 dev veth1"
+ run_cmd "$IP nexthop add id 12 via 2001:db8:92::2 dev veth3"
+ run_cmd "$IP nexthop add id 13 blackhole"
+ run_cmd "$IP nexthop add id 21 via 2001:db8:81::2 dev veth21"
+ run_cmd "$IP nexthop add id 22 via 2001:db8:82::2 dev veth23"
+
+ # must have 2 entries of equal weight
+ run_cmd "$IP nexthop add id 101 group 11 active-backup"
+ log_test $? 2 "Active-backup nexthop can not have 1 entry"
+ run_cmd "$IP nexthop add id 101 group 11/12/21 active-backup"
+ log_test $? 2 "Active-backup nexthop can not have more than 2 entries"
+ run_cmd "$IP nexthop add id 101 group 11,5/21,4 active-backup"
+ log_test $? 2 "Active-backup nexthops must have equal weight"
+ run_cmd "$IP nexthop add id 101 group 11,3/21,3 active-backup"
+ log_test $? 2 "Active-backup nexthops must have default weight"
+
+ # can not replace a/b group with mpath
+ run_cmd "$IP nexthop add id 101 group 11/21 active-backup"
+ run_cmd "$IP nexthop replace id 101 group 11/21 mpath"
+ log_test $? 2 "Can not change group type"
+
+ # a/b group can not have blackhole
+ run_cmd "$IP nexthop add id 102 group 11/13 active-backup"
+ log_test $? 2 "Active-backup can use blackhole as a path"
+}
+
+ipv4_ab_group()
+{
+ local rc
+
+ echo
+ echo "IPv4 active-backup groups"
+ echo "-------------------------"
+
+ check_nexthop_ab_support
+ if [ $? -eq $ksft_skip ]; then
+ return $ksft_skip
+ fi
+
+ setup_ab
+
+ run_cmd "$IP nexthop add id 11 via 172.16.1.2 dev veth1"
+ run_cmd "$IP nexthop add id 12 via 172.16.81.2 dev veth21"
+ run_cmd "$IP nexthop add id 101 group 11/12 active-backup"
+ check_nexthop "id 101" "id 101 group 11/12 active-backup"
+ log_test $? 0 "Create active-backup group"
+
+ run_cmd "$IP ro add 172.16.101.0/24 nhid 101"
+ check_route "172.16.101.1" "172.16.101.0/24 nhid 101 via 172.16.1.2 dev
veth1"
+ log_test $? 0 "Route list shows active device"
+
+ $IP -o ro get 172.16.101.1 2>/dev/null | grep -q "dev veth1"
+ log_test $? 0 "Route get shows active device"
+
+ # carrier down or admin down on nexthop device removes that entry
+ run_cmd "ip -netns peer li set veth2 down"
+ check_nexthop "id 101" "id 101 group 12 active-backup"
+ log_test $? 0 "Carrier down removes active"
+
+ $IP -o ro get 172.16.101.1 2>/dev/null | grep -q "dev veth21"
+ log_test $? 0 "Route get shows backup device"
+
+ run_cmd "$IP li set veth21 down"
+ $IP nexthop sh id 101 2>/dev/null
+ log_test $? 2 "Link down on backup removes nexthop"
+
+ check_route "172.16.101.1" ""
+ log_test $? 0 "Route removed after a-b nexthop removed"
+
+ # restore device state
+ run_cmd "ip -netns peer li set veth2 up"
+ run_cmd "$IP li set veth21 up"
+
+ # a/b with mpath
+ run_cmd "$IP nexthop flush"
+ run_cmd "$IP nexthop add id 11 via 172.16.1.2 dev veth1"
+ run_cmd "$IP nexthop add id 12 via 172.16.2.2 dev veth3"
+ run_cmd "$IP nexthop add id 21 via 172.16.81.2 dev veth21"
+ run_cmd "$IP nexthop add id 22 via 172.16.82.2 dev veth23"
+ run_cmd "$IP nexthop add id 101 group 11/21 active-backup"
+ run_cmd "$IP nexthop add id 102 group 12/22 active-backup"
+ run_cmd "$IP nexthop add id 103 group 101/102"
+ log_test $? 0 "Multipath with active-backup paths"
+
+ run_cmd "$IP nexthop ls"
+ run_cmd "$IP ro add 172.16.101.0/24 nhid 103"
+ run_cmd "ip netns exec me ping -c1 -w1 172.16.101.1"
+ log_test $? 0 "ping with multipath containing active-backup paths"
+
+ run_cmd "ip -netns peer li set veth2 down"
+ check_nexthop "id 103" "id 103 group 101/102"
+ log_test $? 0 "Multipath still shows 2 paths after carrier down in a/b"
+
+ run_cmd "ip netns exec me ping -c1 -w1 172.16.101.1"
+ log_test $? 0 "ping with still works after carrier down"
+
+ run_cmd "ip -netns peer li set veth2 up"
+ run_cmd "$IP nexthop ls"
+ run_cmd "$IP ro ls"
+
+ run_cmd "$IP li set veth21 down"
+ check_nexthop "id 103" "id 103 group 102"
+ log_test $? 0 "Multipath shows 1 path after admin down on new active"
+ run_cmd "ip netns exec me ping -c1 -w1 172.16.101.1"
+ log_test $? 0 "ping with still works after mpath loss of a-b path"
+
+ run_cmd "$IP li set veth21 up"
+ run_cmd "$IP nexthop ls"
+ run_cmd "$IP ro ls"
+
+ #
+ # negative tests
+ #
+ # active points to invalid gw
+ run_cmd "$IP nexthop flush"
+ run_cmd "$IP nexthop add id 11 via 172.16.1.3 dev veth1"
+ run_cmd "$IP nexthop add id 12 via 172.16.81.2 dev veth21"
+ run_cmd "$IP nexthop add id 101 group 11/12 active-backup"
+ run_cmd "$IP ro add 172.16.101.0/24 nhid 101"
+
+ # failed neigh for gateway - should fallback to backup
+ run_cmd "${IP} neigh add 172.16.1.3 dev veth1 nud failed"
+ $IP -o ro get 172.16.101.1 2>/dev/null | grep -q "dev veth21"
+ log_test $? 0 "Route get shows backup device with invalid neigh"
+
+ run_cmd "$IP nexthop flush"
+ run_cmd "$IP nexthop add id 11 via 172.16.1.2 dev veth1"
+ run_cmd "$IP nexthop add id 12 via 172.16.2.2 dev veth3"
+ run_cmd "$IP nexthop add id 13 blackhole"
+ run_cmd "$IP nexthop add id 21 via 172.16.81.2 dev veth21"
+ run_cmd "$IP nexthop add id 22 via 172.16.82.2 dev veth23"
+
+ # must have 2 entries of equal weight
+ run_cmd "$IP nexthop add id 101 group 11 active-backup"
+ log_test $? 2 "Active-backup nexthop can not have 1 entry"
+ run_cmd "$IP nexthop add id 101 group 11/12/21 active-backup"
+ log_test $? 2 "Active-backup nexthop can not have more than 2 entries"
+ run_cmd "$IP nexthop add id 101 group 11,5/21,4 active-backup"
+ log_test $? 2 "Active-backup nexthops must have equal weight"
+ run_cmd "$IP nexthop add id 101 group 11,3/21,3 active-backup"
+ log_test $? 2 "Active-backup nexthops must have default weight"
+
+ # can not replace a/b group with mpath
+ run_cmd "$IP nexthop add id 101 group 11/21 active-backup"
+ run_cmd "$IP nexthop replace id 101 group 11/21 mpath"
+ log_test $? 2 "Can not change group type"
+
+ # a/b group can not have blackhole
+ run_cmd "$IP nexthop add id 102 group 11/13 active-backup"
+ log_test $? 2 "Active-backup can use blackhole as a path"
+}
+
+################################################################################
+# fdb nexthops
+
check_nexthop_fdb_support()
{
$IP nexthop help 2>&1 | grep -q fdb
--
2.21.1 (Apple Git-122.3)
