On Mon, 5 Mar 2007 13:48:29 -0800 (PST) Chris Stromsoe <[EMAIL PROTECTED]> wrote:
> I have a bunch of dual-port SK 98xx cards that work with sk98lin but not > with skge. After loading skge, I get > > ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> > IRQ 10 > skge 0000:01:0a.0: unsupported phy type 0x0 > ACPI: PCI interrupt for device 0000:01:0a.0 disabled > skge: probe of 0000:01:0a.0 failed with error -95 > > > lspci -vv output for the card: > > 0000:01:0a.0 Ethernet controller: Syskonnect (Schneider & Koch) SK-98xx > Gigabit Ethernet Server Adapter (rev 12) > Subsystem: Syskonnect (Schneider & Koch) SK-9844 Gigabit Ethernet > Server Adapter (SK-NET GE-SX dual link) > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Interrupt: pin A routed to IRQ 10 > Region 0: Memory at ff8fc000 (32-bit, non-prefetchable) [size=16K] > Region 1: I/O ports at d800 [size=256] > Expansion ROM at ff400000 [disabled] [size=128K] > Capabilities: [48] Power Management version 1 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=1 PME- > Capabilities: [50] Vital Product Data > What kernel version. Type 0 is XMAC support, and that was added to a fairly recent kernel (2.6.19?) -- Stephen Hemminger <[EMAIL PROTECTED]> - To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
